Operation Manual

126 - ENGLISH
Chapter 6 Appendix — Technical information
Mode
Resolution
(Dots)
Scanning frequency Dots
clock
frequency
(MHz)
Format
Plug and play
*3
Horizontal
(kHz)
Vertical
(Hz)
RGB2
DVI-D
EDID1
DVI-D
EDID2
DVI-D
EDID3
HDMI
1125 (1080)/60p 1 920 x 1 080 67.5 60.0 148.5 R/Y/H/D
l
l l
1125 (1080)/50p 1 920 x 1 080 56.3 50.0 148.5 R/Y/H/D
l
l l
VESA400 640 x 400 37.9 85.1 31.5 R/H/D
VGA
640 x 400 31.5 70.1 25.2 R/H/D
640 x 480 31.5 59.9 25.2 R/H/D
l l l l l
640 x 480 35.0 66.7 30.2 R/H/D
640 x 480 37.9 72.8 31.5 R/H/D
l
l l l
640 x 480 37.5 75.0 31.5 R/H/D
l
l l l
640 x 480 43.3 85.0 36.0 R/H/D
SVGA
800 x 600 35.2 56.3 36.0 R/H/D
l
l l l
800 x 600 37.9 60.3 40.0 R/H/D
l
l l l
800 x 600 48.1 72.2 50.0 R/H/D
l
l l l
800 x 600 46.9 75.0 49.5 R/H/D
l
l l l
800 x 600 53.7 85.1 56.3 R/H/D
MAC16 832 x 624 49.7 74.6 57.3 R/H/D
l
l l l
XGA
1 024 x 768 39.6 50.0 51.9 R/H/D
1 024 x 768 48.4 60.0 65.0 R/H/D
l
l l l
1 024 x 768 56.5 70.1 75.0 R/H/D
l
l l l
1 024 x 768 60.0 75.0 78.8 R/H/D
l
l l l
1 024 x 768 65.5 81.6 86.0 R/H/D
1 024 x 768 68.7 85.0 94.5 R/H/D
1 024 x 768 80.0 100.0 105.0 R/H/D
1 024 x 768 99.0 119.8 137.8 R/H/D
MXGA
1 152 x 864 64.0 70.0 94.2 R/H/D
1 152 x 864 67.5 74.9 108.0 R/H/D
1 152 x 864 77.1 85.0 119.7 R/H/D
MAC21 1 152 x 870 68.7 75.1 100.0 R/H/D
l
l l l
1280 x 768
1 280 x 768 39.6 49.9 65.3 R/H/D
1 280 x 768 47.8 59.9 79.5 R/H/D
1280 x 800
1 280 x 800 41.3 50.0 68.0 R/H/D
1 280 x 800 49.7 59.8 83.5 R/H/D
l
*4
l
*4
l
*4
l
*4
MSXGA 1 280 x 960 60.0 60.0 108.0 R/H/D
SXGA
1 280 x 1 024 64.0 60.0 108.0 R/H/D
l
l l l
1 280 x 1 024 80.0 75.0 135.0 R/H/D
l
l l l
1 280 x 1 024 91.1 85.0 157.5 R/H/D
SXGA+
1 400 x 1 050 65.2 60.0 122.6 R/H/D
l
l l
l
1 400 x 1 050 82.2 75.0 155.9 R/H/D
WXGA+ 1 440 x 900 55.9 59.9 106.5 R/H/D
UXGA 1 600 x 1 200 75.0 60.0 162.0 R/H/D
l
l l l
WSXGA+ 1 680 x 1 050 65.3 60.0 146.3 R/H/D
1920 x 1080 1 920 x 1 080
*2
66.6 59.9 138.5 R/H/D
WUXGA 1 920 x 1 200
*2
74.0 60.0 154.0 R/H/D
l
l
*1 When a 1125 (1035)/60i signal was input, it is displayed as a 1125 (1080)/60i signal.
*2 VESA CVT-RB (Reduced Blanking) compatible
*3 Signals with a
l
in the Plug and play columns are signals described in the projector's EDID (extended display identication data). If a signal has no
l
in the Plug and play columns but has an entry in the Format column, it can be input. For signals without a
l
in the Plug and play columns, there
may be instances where resolution cannot be selected in the computer even though the projector supports them.
*4 Only for PT-DW740E
Note
rf
The number of display dots for PT-DW740E is 1 280 x 800, and that for PT-DX810E is 1 024 x 768. A signal with a different resolution is
converted to the number of display dots and displayed.
rf
The “i” at the end of the resolution indicates an interlaced signal.
rf
When interlaced signals are connected, ickering may occur on the projected image.