User Manual

Chapter 2 Getting Started — Setting up
32 - ENGLISH
Parts for ceiling mount (optional)
You can install the projector on the ceiling using the optional Ceiling Mount Bracket for Projectors (Model No.: ET-PKD310H (for High Ceilings),
ET-PKD310S (for Low Ceilings)).
f Be sure to use the Ceiling Mount Bracket for Projectors specied for this projector.
f Refer to the Installation Instructions supplied with the Ceiling Mount Bracket for Projectors when installing the projector with the bracket.
Attention
f To ensure projector performance and security, installation of the Ceiling Mount Bracket for Projectors must be carried out by your dealer or a
qualied technician.
Screen size and throw distance
Refer to the screen size and projection distances to install the projector. Image size and image position can be adjusted in accordance with the
screen size and screen position.
SD
L (LW/LT)
L1
L1
L (LW/LT)
SW SH
SH
SW
Projection screen
Screen
Screen
(Unit: m)
L (LW/LT)
*1
Projection distance
L1 Lens protrusion dimension
SH Image height
SW Image width
SD Image diagonal size
*1 LW: Minimum projection distance when the Zoom Lens is used
LT: Maximum projection distance when the Zoom Lens is used
(Unit: m)
Projection lens Model No. L1 dimension (approximate value)
ET-D75LE1 0.1144
ET-D75LE2 0.0989
ET-D75LE3 0.1024
ET-D75LE4 0.1263
ET-D75LE5 0.2024
ET-D75LE6 0.2119
ET-D75LE8 0.2544
ET-D75LE10 0.125
ET-D75LE20 0.121
ET-D75LE30 0.121
ET-D75LE40 0.124
ET-D75LE50 0.203
Attention
f Before setting up, read “Precautions for use” (x page 16).
f Do not use the projector and the high-powered laser equipment in the same room. The DLP chips can be damaged if a laser beam hits the
lens surface.