Owners Manual
Table Of Contents
- Read this first!
- Chapter 1 Preparation
- Chapter 2 Getting Started
- Chapter 3 Basic Operations
- Switching on/off the projector
- Projecting
- Operating with the remote control
- Using the shutter/AV mute function
- Using the mute function
- Adjusting the volume
- Using the freeze function
- Using the on-screen display function
- Using the automatic setup function
- Using the SCREEN ADJ button
- Switching the aspect ratio of the image
- Using the digital zoom function
- Using the presentation timer function
- Using the FUNCTION button
- Displaying internal test patterns
- Using the status function
- Using the ECO management function
- Setting the ID number of the remote control
- Chapter 4 Settings
- Chapter 5 Operation of Function
- Chapter 6 Maintenance
- Chapter 7 Appendix
Chapter 4
Settings — [PICTURE] menu
ENGLISH - 71
*1 When [RGB1 INPUT SETTING] is set to [Y/C] (Æ page 83)
Attention
f
When this is set for an input signal with less noise, the image may look different from what it originally was. In such a case, set it to [OFF].
[TV-SYSTEM]
(Only when the <VIDEO IN> terminal or <RGB 1 IN>
*1
terminal is selected)
The projector will automatically detect the input signal, but you can set the color system manually when an
unstable signal is input. Set the color system to match the input signal.
*1 When [RGB1 INPUT SETTING] is set to [Y/C] (Æ page 83)
1) Press as to select [TV-SYSTEM].
2) Press qw or the <ENTER> button.
f
The [TV-SYSTEM] individual adjustment screen is displayed.
3) Press qw to select the color system.
f
The items will switch each time you press the button.
f
Select among [AUTO], [NTSC], [NTSC4.43], [PAL], [PAL-M], [PAL-N], [PAL60] and [SECAM].
f
Set it to [AUTO] normally. (Setting [AUTO] will automatically select [NTSC], [NTSC4.43], [PAL], [PAL-M],
[PAL-N], [SECAM], or [PAL60].)
[RGB/YP
B
P
R
]/[RGB/YC
B
C
R
]
Set it to [AUTO] normally. If images are not displayed correctly when this is set to [AUTO], set either [RGB], [YC
B
C
R
]
or [YP
B
P
R
] in accordance with the input signal.
1) Press as to select [RGB/YP
B
P
R
] or [RGB/YC
B
C
R
].
2) Press qw or the <ENTER> button.
f
The [RGB/YP
B
P
R
] or [RGB/YC
B
C
R
] individual adjustment screen is displayed.
3) Press qw to switch the item.
f
The items will switch each time you press the button.
[AUTO]
The sync signal automatically selects the signal [RGB]/[YP
B
P
R
]/[YC
B
C
R
].
[RGB]
Select it for RGB signal input.
[YP
B
P
R
]
Select it for YP
B
P
R
signal input.
[YC
B
C
R
]
Select it for YC
B
C
R
signal input.
When the <RGB 1 IN>/<RGB 2 IN> terminal is selected
f
For 525(480)/60i, 625(576)/50i, 525(480)/60p and 625(576)/50p input
Select [AUTO], [RGB] or [YC
B
C
R
].
f
For other movie-based signal input
Select [AUTO], [RGB] or [YP
B
P
R
].
When the <HDMI 1 IN>/<HDMI 2 IN>/<DIGITAL LINK>
*1
terminal is selected
f
For 525(480)/60i, 625(576)/50i, 525(480)/60p and 625(576)/50p input
Select [AUTO], [RGB] or [YC
B
C
R
].
f
For other movie-based signal input
Select [AUTO], [RGB] or [YP
B
P
R
].
*1 Only for PT-EZ590, PT-EW650 and PT-EX620
Note
f
Refer to “List of compatible signals” (
Æ
page 157) for the types of video signals that can be used with the projector.
f
The signal selection may not function properly depending on connected devices.