Owners Manual
Table Of Contents
- Read this first!
- Chapter 1 Preparation
- Chapter 2 Getting Started
- Chapter 3 Basic Operations
- Switching on/off the projector
- Projecting
- Operating with the remote control
- Using the shutter/AV mute function
- Using the mute function
- Adjusting the volume
- Using the freeze function
- Using the on-screen display function
- Using the automatic setup function
- Using the SCREEN ADJ button
- Switching the aspect ratio of the image
- Using the digital zoom function
- Using the presentation timer function
- Using the FUNCTION button
- Displaying internal test patterns
- Using the status function
- Using the ECO management function
- Setting the ID number of the remote control
- Chapter 4 Settings
- Chapter 5 Operation of Function
- Chapter 6 Maintenance
- Chapter 7 Appendix
Chapter 4
Settings — [DISPLAY OPTION] menu
ENGLISH - 85
[DEFAULT]
Standard setting.
[SCREEN FIT]
Changes EDID data according to the [SCREEN FORMAT] setting.
[USER]
Sets the [RESOLUTION] and [VERTICAL SCAN FREQUENCY] items to EDID.
f
When [DEFAULT] or [SCREEN FIT] is selected, proceed to Step
10)
.
6) Press the <ENTER> button.
f
The
[RESOLUTION]
screen is displayed.
7) Press as to select [RESOLUTION].
f
Select [1024x768p], [1280x720p], [1280x800p], [1280x1024p], [1366x768p], [1400x1050p], [1440x900p],
[1600x900p], [1600x1200p], [1680x1050p], [1920x1080p], [1920x1080i] or [1920x1200p].
8) Press the <ENTER> button.
f
The
[VERTICAL SCAN FREQUENCY]
screen is displayed.
9) Press qw to select [VERTICAL SCAN FREQUENCY].
f
Select [60Hz], [50Hz], [30Hz], [25Hz] or [24Hz] when [1920x1080p] is selected for [RESOLUTION].
f
Select [60Hz], [50Hz] or [48Hz] when [1920x1080i] is selected for [RESOLUTION].
f
The value is xed to [60Hz] when [1280x1024p], [1400x1050p], [1440x900p] or [1600x1200p] is selected
for [RESOLUTION].
f
Select [60Hz] or [50Hz] when anything other than the above signals are selected for [RESOLUTION].
10) Press the <ENTER> button.
f
The conrmation screen is displayed.
11) Press qw to select [OK], and press the <ENTER> button.
Note
f
The same setting of the [EDID MODE] is set to the <HDMI 1 IN> terminal and the <HDMI 2 IN> terminal.
f
The setting details are displayed in [RESOLUTION] and [VERTICAL SCAN FREQUENCY] below [EDID MODE].
f
The resolution and vertical scanning frequency settings may be required on your computer or video device.
f
After conguring settings, your computer or video device or the projector may be required to be restarted.
f
Output with resolution and vertical scanning frequency that have been set may not be performed depending on your computer or video
device.
[DIGITAL LINK IN]
(Only for PT-EZ590, PT-EW650 and PT-EX620)
Set the signal level when DIGITAL LINK input is selected.
1) Press as to select [DIGITAL LINK IN].
2) Press the <ENTER> button.
f
The
[DIGITAL LINK IN]
screen is displayed.
3) Press as to select [SIGNAL LEVEL].
4) Press qw to switch the item.
f
The items will switch each time you press the button.
[AUTO]
Automatically sets the signal level.
[64-940]
Select when the HDMI terminal output of an external device (such as a Blu-ray disc player) is connected to the
<DIGITAL LINK/LAN> terminal via a twisted-pair-cable transmitter.
[0-1023]
Select when the DVI-D terminal output or the HDMI terminal output of an external device (such as a computer)
is connected to the <DIGITAL LINK/LAN> terminal via a twisted-pair-cable transmitter.
Note
f
The optimal setting varies depending on the output setting of the connected external device. Refer to the operation instruction of the external
device regarding the output of the external device.
f
The displayed signal level is assumed when the input is 30 bits.
Setting [EDID MODE]
1) Press as to select [DIGITAL LINK IN].