Owners Manual
Table Of Contents
- Read this first!
- Chapter 1 Preparation
- Chapter 2 Getting Started
- Chapter 3 Basic Operations
- Switching on/off the projector
- Projecting
- Operating with the remote control
- Using the shutter/AV mute function
- Using the mute function
- Adjusting the volume
- Using the freeze function
- Using the on-screen display function
- Using the automatic setup function
- Using the SCREEN ADJ button
- Switching the aspect ratio of the image
- Using the digital zoom function
- Using the presentation timer function
- Using the FUNCTION button
- Displaying internal test patterns
- Using the status function
- Using the ECO management function
- Setting the ID number of the remote control
- Chapter 4 Settings
- Chapter 5 Operation of Function
- Chapter 6 Maintenance
- Chapter 7 Appendix
Chapter 4
Settings — [DISPLAY OPTION] menu
ENGLISH - 87
5) When the confirmation screen is displayed, press qw to select [OK], and press the <ENTER> button.
Setting the closed caption mode
1) Press as to select [CLOSED CAPTION SETTING].
2) Press the <ENTER> button.
f
The [
CLOSED CAPTION SETTING]
screen is displayed.
3) Press as to select [MODE].
f
When [CLOSED CAPTION] is set to [OFF], [MODE] cannot be selected.
4) Press qw to switch the item.
f
The items will switch each time you press the button.
[CC1]
Displays CC1 data.
[CC2]
Displays CC2 data.
[CC3]
Displays CC3 data.
[CC4]
Displays CC4 data.
Note
f
Closed caption is a function that displays text information of video signals mainly used in North America. Captions may not be displayed
depending on the connected devices or contents being played back.
f
[CLOSED CAPTION SETTING] can only be selected if an NTSC or 480i YC
B
C
R
signal is input.
f
If [CLOSED CAPTION] is set to [ON], the brightness of image may be changed according to the external devices or the used content of the
closed caption corresponding connection.
f
If a closed caption signal of the selected mode is input, the security message set in the [SECURITY] menu → [DISPLAY SETTING] (
Æ
page
105) is not displayed.
f
Closed captions are not displayed when the menu screen is displayed.
[SCREEN SETTING]
Set the screen size.
Correct to the optimum image position for the set screen when changing the aspect ratio of a projected image. Set
as necessary for the screen in use.
1) Press as to select [SCREEN SETTING].
2) Press the <ENTER> button.
f
The
[SCREEN SETTING]
screen is displayed.
3) Press as to select [SCREEN FORMAT].
4) Press qw to switch the [SCREEN FORMAT] item.
f
The items will switch each time you press the button.
r
For PT-EZ590
[SCREEN FORMAT] Description Range when [SCREEN POSITION] is selected
[16:10]
The projected aspect ratio is 16:10. The vertical position cannot be adjusted.
[16:9]
The projected aspect ratio is 16:9. Adjusts the vertical position.
[4:3]
The projected aspect ratio is 4:3. Adjusts the horizontal position.
r
For PT-EW650, PT-EW550
[SCREEN FORMAT] Description Range when [SCREEN POSITION] is selected
[16:10]
The projected aspect ratio is 16:10. The vertical position cannot be adjusted.
[16:9]
The projected aspect ratio is 16:9. Adjusts the vertical position.
r
For PT-EX620, PT-EX520
[SCREEN FORMAT] Description Range when [SCREEN POSITION] is selected
[4:3]
The projected aspect ratio is 4:3 The vertical position cannot be adjusted.
[16:9]
The projected aspect ratio is 16:9. Adjusts the vertical position.
5) Press as to select [SCREEN POSITION].