Operation Manual

Setting up
24
- ENGLISH
Getting Started
Projector location range
J
You can adjust the location of the projector within following limits.
For the screen height (SH) and the screen width (SV),
see “Screen size and throw distance” (
Æ
page 20)
Settable range of the projector,
z
when the screen position is xed
Shift range of the screen, when the projector position is xed
z
●PT-FW430E (16:10) ●PT-FX400E
FILTER TEMP
ENTER
RETURNMENU
INPUT SELECT
LAMP
ON（G）
STANDBY（R）
Screen without lens shiftScreen without lens shift
Shift range
Projector
FILTER TEMP
ENTER
RETURNMENU
INPUT SELECT
LAMP
ON（G）
STANDBY（R）
Screen without lens shift
Projector
Shift range
Lens shift direction Limit of adjustment
Horizontal (H) Up to 24 % of the screen width (SW)
Vertical (V) Up to 51 % of the screen height (SH)
Lens shift direction Limit of adjustment
Horizontal (H) Up to 27 % of the screen width (SW)
Vertical (V) Up to 50 % of the screen height (SH)
Note
When the projector is located right in front of the screen and the lens shift lever is centered, you will get the best quality of
z
the projection image.
When the lens shift lever is at the horizontal limit of the shift range, you cannot move the lever to the vertical limit, likewise
z
when the lens shift lever is at the vertical limit of the shift range, you cannot move the lever to the horizontal limit.
When the projector is tilted and you adjust KEYSTONE, the center of the screen and the lens need to be realigned.
z
FILTERTEMPLAMP
ON
（
G
）
STANDBY
（
R
）
H
V
SH
SW
Lens center
Projector
Screen
Vertical center of screen
Placement
（Lens center）