Operation Manual

30
- ENGLISH
Basic Operation
Basic operations using the remote control
Using the AV MUTE function
If the projector is not used for a certain period of time
during the meeting intermission, for example, an
AV MUTE mode is available that allows the user to
mute the sound and to hide images temporarily.
button
Press <AV MUTE> button on the 1 )
remote control.
The image disappears and the sound is muted.
z
Press <AV MUTE> button again.2 )
The image and the sound resume.
z
Using the FREEZE function
You can freeze the projected image and stop the
sound temporarily, regardless of the playing condition
of the connected device.
button
Press <FREEZE> button on the remote 1 )
control.
The image freezes and the sound is muted.
z
Press <FREEZE> button again.2 )
The image unfreezes and the sound resumes.
z
Note
“FREEZE” is displayed on the screen while the freeze
z
function is enabled.
Switching the input signal
You can switch the input signals to project.
button
Press <INPUT SELECT> (<COMPUTER>,
<DVI-I>, <VIDEO/S-VIDEO>, <NETWORK>,
or <HDMI>) button on the remote control.
COMPUTER Switches to COMPUTER input.
DVI-I Switches to DVI-I input.
VIDEO/S-VIDEO Switches to VIDEO or S-VIDEO.
NETWORK Switches to NETWORK input.
HDMI Switches to HDMI input.
Note
Each press of the <INPUT SELECT> button on the
z
Control Panel of the main unit switches the settings as
shown below. (
Æ
page 17)
NETWORK HDMI DVI-I
VIDEO S-VIDEO COMPUTER