User's Manual
Table Of Contents
- Read this first!
- Chapter 1 Preparation
- Chapter 2 Getting Started
- Chapter 3 Basic Operations
- Switching on/off the projector
- Projecting
- Using the USB memory
- Operating with the remote control
- Using the shutter function
- Using the mute function
- Adjusting the volume
- Using the freeze function
- Using the on-screen display function
- Using the automatic setup function
- Using the screen adjustment function
- Using the digital zoom function
- Switching the image aspect ratio
- Using the presentation timer function
- Using the function button
- Displaying internal test pattern
- Using the status function
- Using the ECO management function
- Setting ID number of the remote control
- Chapter 4 Settings
- Menu navigation
- [PICTURE] menu
- [POSITION] menu
- [ADVANCED MENU] menu
- [DISPLAY LANGUAGE] menu
- [DISPLAY OPTION] menu
- [PROJECTOR SETUP] menu
- [PROJECTOR ID]
- [PROJECTION METHOD]
- [ECO MANAGEMENT]
- [LightID]
- [INITIAL STARTUP]
- [STARTUP INPUT SELECT]
- [DATE AND TIME]
- [SCHEDULE]
- [RS-232C]
- [REMOTE1 MODE]
- [FUNCTION BUTTON]
- [LENS CALIBRATION]
- [AUDIO SETTING]
- [FILTER COUNTER]
- [DC OUT]
- [STATUS]
- [DATA CLONING]
- [SAVE ALL USER DATA]
- [LOAD ALL USER DATA]
- [INITIALIZE]
- [SERVICE PASSWORD]
- [TEST PATTERN] menu
- [SIGNAL LIST] menu
- [SECURITY] menu
- [NETWORK/USB] menu
- Chapter 5 Operations
- Chapter 6 Maintenance
- Chapter 7 Appendix
Chapter 7 Appendix — Specications
ENGLISH - 227
r Compatible signal
For details of the types of video signals that can be used with the projector, refer to “List of compatible signals”
(x page 220).
Video input
Horizontal: 15.73 kHz, Vertical: 59.94 Hz; Horizontal: 15.63 kHz, Vertical: 50 Hz
RGB input
f Resolution: 640 x 400 to 1 920 x 1 200
f Dot clock frequency: 162 MHz or less
f PIAS (Panasonic Intelligent Auto Scanning) system
YC
B
C
R
/YP
B
P
R
input
f Resolution: 480i/576i to 1 920 x 1 080
f Dot clock frequency: 148.5 MHz or less
f The SYNC/HD and VD terminals do not support 3 value SYNC.
HDMI input
For PT-MZ770
f Moving image signal resolution: 480i
*1
/576i
*1
to 4 096 x 2 160
Still image signal resolution: 640 x 400 to 1 920 x 1 200 (non-interlace)
f Dot clock frequency: 25 MHz to 594 MHz
For PT-MW730
f Moving image signal resolution: 480i
*1
/576i
*1
to 1 920 x 1 080
Still image signal resolution: 640 x 400 to 1 920 x 1 200 (non-interlace)
f Dot clock frequency: 25 MHz to 162 MHz
DIGITAL LINK input
For PT-MZ770
f Moving image signal resolution: 480i
*1
/576i
*1
to 4 096 x 2 160
Still image signal resolution: 640 x 400 to 1 920 x 1 200 (non-interlace)
f Dot clock frequency: 25 MHz to 297 MHz
For PT-MW730
f Moving image signal resolution: 480i
*1
/576i
*1
to 1 920 x 1 080
Still image signal resolution: 640 x 400 to 1 920 x 1 200 (non-interlace)
f Dot clock frequency: 25 MHz to 162 MHz
*1 Pixel-Repetition signal (dot clock frequency 27.0 MHz) only