Owners manual

Chapter 2Getting Started — Connecting
ENGLISH - 53
r Connecting example
Connect all the projectors to be linked in a loop by daisy chain connection when using the contrast
synchronization function/shutter synchronization function. The number of linked projectors is limited to the
maximum of 64 projectors.
Connecting terminals of the first projector
Connecting terminals of the fourth projector
Connecting terminals of the second projector
Connecting terminals of the third projector
Communication cable (straight all connected) Communication cable (straight all connected)
Communication cable (straight all connected) Communication cable (straight all connected)
Note
f The contrast synchronization function and the shutter synchronization function can be used simultaneously.
f For details on the settings of the contrast synchronization function and the shutter synchronization function, refer to the [PROJECTOR
SETUP] menu [MULTI PROJECTOR SYNC] (x page 132).
f The menu items in the [PROJECTOR SETUP] menu [MULTI PROJECTOR SYNC] are the same as the following setting items.
g The [PICTURE] menu [DYNAMIC CONTRAST] [USER] [MULTI PROJECTOR SYNC]
g The [DISPLAY OPTION] menu [SHUTTER SETTING] [MULTI PROJECTOR SYNC]
f If there are any projectors which you do not want to synchronize within the linked projectors, set [CONTRAST SYNC] and [SHUTTER
SYNC] to [OFF] individually.