Operating instructions

29
Adjusting the picture
• For RGB/DVI signals only
• For S-Video/Video/YPB
PR signals only
PICTURE MODE
The picture mode can be selected from the
following depending on viewing conditions and the
video signal source in use:
DYNAMIC : Picture brightness/contrast ratio is
increased to suit brighter viewing
environments.
GRAPHIC : The picture becomes suitable for
input from to the personal
computer.
STANDARD : The picture becomes suitable for
moving images in general.
CINEMA : The picture becomes suitable for
movie sources.
NATURAL : The picture becomes suitable for
use in a dark room.
BRIGHT
“BRIGHT” is used to adjust the black level
(brightness).
: Raises the picture brightness.
: Lowers the picture brightness.
CONTRAST
“CONTRAST” is used to adjust the contrast ratio.
: Raises the contrast ratio.
: Lowers the contrast ratio.
COLOR
(For S-Video/Video/YPBPR
signals only)
: Deepens colors.
: Weakens colors.
TINT
(For S-Video/Video/YP
BPR signals only)
“TINT” is used to adjust human skin.
: Adjusts skin tone toward greenish color.
: Adjusts skin tone toward reddish-purple.
COLOR TEMP.
The color temperature is adjusted when the white
areas of images take on a reddish or bluish hue.
DEFAULT: Standard setting
HIGH : The white areas take on a more
bluish-white hue.
MIDDLE : The white areas take on a slightly
reddish hue.
USER : The RGB values of the white balance
are set separately.
Press the ENTER button, select “W-
BAL HIGH” or “W-BAL LOW”, and
proceed with the detailed settings.
: The colors of the selected item
are darkened.
: The colors of the selected item
are lightened.
PICTURE
SELECT ADJ RETRN
PICTURE MODE GRAPHIC
DEFAULT
BRIGHT
32
CONTRAST
32
SHARPNESS
06
COLOR TEMP.
ON
RGB
AI
SYSTEM
PICTURE
SELECT ADJ RETRN
PICTURE MODE STANDARD
DEFAULT
BRIGHT
32
CONTRAST
32
SHARPNESS
06
COLOR
32
TINT
32
COLOR TEMP.
ON
ON
NR
AI
AUTO1
TV-SYSTEM