Contains full listing of Remote commands

ManualsBrandsPanasonic ManualsIndustrial Video ProjectionPTL6500E

5.3. Canceling the service support mode

Press the MENU button on the main unit or the remote control unit.

6. Using the SERIAL Connector

SERIAL connector which is on the side interface panel of the projector conforms to

RS-232C standard. This projector can be controlled by a PC which is connected as

shown in "6.1. Connection".

For controlling this projector by a PC, requires communication software on the market,

and inputs control commands according to communication settings and basic format

below.

6.1. Connection

Note:

Use a proper communication cable which is suitable for the PC to connect SERIAL

connector and the PC.

6.2. Pin Layout and Signal Names for SERIAL Connector

6.2.1. SERIAL IN Terminal

Summary of content (8 pages)

PAGE 1
5.3. Canceling the service support mode Press the MENU button on the main unit or the remote control unit. 6. Using the SERIAL Connector SERIAL connector which is on the side interface panel of the projector conforms to RS-232C standard. This projector can be controlled by a PC which is connected as shown in "6.1. Connection". For controlling this projector by a PC, requires communication software on the market, and inputs control commands according to communication settings and basic format below. 6.1.
PAGE 2
6.2.2. SERIAL OUT Terminal 6.3.
PAGE 3
Signal Level Contents Sync. method Baud rate Asynchronous Conforms to 9 600 bps Description Synchronizes every 1 character (8 bits) Data transfer speed Parity RS-232C None Error detection method Character length standard 8 bits Number of bit composing 1 character Stop bit 1 bit Uses stop bit when asynchronous method X parameter Not used S parameter Not used 6.4. Basic Format The data sent from the PC to the projector is transmitted in the format shown below.
PAGE 4
Control Commands Command Name Function / Contents (Parameter format is shown in < >) AMT : Call back from Projector Minimum Value of Parameter Maximum Value of Parameter 0 1 AVI 0 63 DSG - - (Parameter format is shown in < >) AUDIO MUTE AMT AUD VOLUME DOWN AUD AUU VOLUME UP AUU AVL : DSG : USER MODE DELETE VOLUME USER 1 USER 2 USER 3 DZD D. ZOOM DOWN DZD DZU D.
PAGE 5
Command Name Function / Contents (Parameter format is shown in < >) OZM : Call back from Projector (Parameter format is shown in < >) ZOOM OZM POF POWER OFF POF PON POWER ON PON Minimum Value of Parameter Maximum Value of Parameter -90 +90 VBR : BRIGHT VBR 0 63 VCN : CONTRAST VCN 0 63 VCO : COLOR VCO 0 63 VCP : CLOCK PHASE VCP 0 63 VDC : DOT CLOCK VDC 0 VHP : POSITION VHP 0 VPM : PICTURE MODE VPM - -
PAGE 6
Query Command Contents Call back from Projector (Parameter format is shown in < >) Q$L : QAM QAS QAV QBC QCP QDC QDI QF1 QFZ QHP QIN QIX (PT-L6500** only) QKS QLG QLP QMT QPM =Natural, =Dynamic QPW QRF QS1 QSG QSH QSI SET
PAGE 7
Parameter Format Parameter Size (Byte) Parameter Definition 4 Decimal notation without plus/minus sign: 0000 hour to 9999 hours 1 0 = Autosetup in process, 1 = Autosetup in stop 1 0 = BLUE, 1 = BLACK 1 PT-L6500** 0 = INDEX WINDOW, 1 = MUTE, 2 = STANDARD PT-L6600** 0 = MUTE, 1 = STANDARD 1 1 = LAMP 1, 2 = LAMP 2 2 0 = ALL, 1 = 1, 2 = 2, ...
PAGE 8
6.6. Communication Cable Specifications 6.7. Signal Selector Connecting Cable Specifications When connecting to a signal selector (ex. TW-SWS62J), use a cable with specifications below. Connecting method: Connects a video signal cable from the signal selector to "VIDEO IN", and an RGB signal cable to "RGB1 IN". 7.