Manual

Notes on connections

• Turn off the power supply for all components before making any connections.

• If the cables necessary for connecting a component to the system are not included with the

component or available as an option, you may need to fashion a cable to suit the component

concerned.

• Read the instruction manual for each system component carefully before connecting it.

Overtightening "Nut type" RF coaxial cables may damage jacks.

Finger tighten only.

[] Antenna Cormection

Connect the cable from Antenna to the VHF/UHF terminal on the unit,

VHF UHF

Antenna Antenna

Mixer _

[] Cable Connection

Connect the cable supplied by your local cable company to VHF/UHF terminal on the unit.

Note to CABLE system installer:

This reminder is provided to call

the CABLE (Cable TV) System

Installer's attention to Article

820°40 of the NEC that provides

guidelines for proper grounding

and, in particular, specifies that

the cable ground shall be

connected to the grounding

system of the building, as close to

the point of cable entry as

practical.

In tkomCABLE

(able Box

' 1ir

(0 @