Manual

• Connecting Amplifier (5.1 ch Surround system) [Digital connection]

DECK,S' Dolby Digital Decoder,_Amplifier.i, Speaker

DECK.), DTS (Digital Theater Systems) Decoder =l,Amplifier=l, Speaker

When DUDs recorded in Dolby Digital or DTS are played, Dolby Digital bitstream

or DTS bitstream is output from the DECK OPTICAL digital audio output connector.

When DECK is connected to a Dolby Digital decoder or DTS decoder, you can

enjoy theater-quality audio in your home. [An optical digital audio cable (optional)

is required when an optional Dolby Digital decoder or DTS decoder is used.]

Notes on connecting an optical

digital audio cable (optional)

• Firmly connect the cable to the

connector.

D VD/VCR DECK

(Rear)

Front

Speaker

(A)pticalDi_ital

udio(kd_]e

(optional)

To Optical

Digital Audio

Input Connector S, bwoqfZ_r

Caution for optical digital audio output connector:

• When connecting an amplifier (with an Optical Digital Input Connector) which does not

contain the Dolby Digital or DTS decoder, be sure to select "PCM" at "Dolby Digital"

and "PCM" at "dts" of the Settings for DVD Operation "Audio Output" (see p. 53).

Otherwise, any attempt to play DVDs may cause such a high level of noise that it may

be harmful to your ears and damage your speakers.

• When a Dolby Digital/DTS decoder is connected, please select "Bitstream" at "dts" or

"Dolby Digital" of the Settings for DVD Operation "Audio Output".

If "PCM" is selected, there will be stereo sound. (See p. 53.)

• CDs can be played as usual.

Note:

• Some DTS decoders which do not support DVD-DTS interface may not work properly with

DECK.