Manual

I-J.-[e][_ .-t=[,,-$.-,]kVA= [elIJi d
Sets the Component Video Output Connector (p. 10, 13)
to output the Progressive scan signal.
Press ACTION
to display DVD MAIN MENU.
2
Press AV
to select "PROGRESSIVE
OUT," and
press SET repeatedly
for mode. (See below.)
OFF: Progressive scan signal is not output.
ON: Progressive scan signal is output from the
Component Video Output Connector.
Press ACTION
to exit this mode.
If the television is not progressive compatible,
a progressive scan picture is not availaMe.
Connect the Video Output or S-Video Output
connector (see p. 12, 13) and set PROGRESSIVE
OUT to "OFF".
CONSUMERS SHOULD NOTE THAT NOT ALL
HIGH DEFINITION TELEVISION SETS ARE FULLY
COMPATIBLE WITH THIS PRODUCT AND MAY
CAUSE ARTIFACTS TO BE DISPLAYED IN THE
PICTURE. IN CASE OF 525 PROGRESSIVE SCAN
PICTURE PROBLEMS, IT IS RECOMMENDED
TO SET PROGRESSIVE OUT TO "OFF".
IF THERE ARE QUESTIONS REGARDING OUR TV
SET COMPATIBILITY WITH THIS MODEL 525p
DVDNCR DECK, PLEASE CONTACT OUR
CUSTOMER SERVICE CENTER.
r_O
G®®@F
ACTON O_An r_:_W
7®® ....
AC_ON
SELECT
AV
SET
55