UB'E EATURE" Panasonic" DVD/VCR a..r.,,_n_ Model No. I Connections Brlr_q DECK Operating Instructions PV-D4743/PV-D4743S and Initial Setup Procedures are on pages 12 to 17. MULTI FORMAT PLAYBACK DIGITAL mmliLaZmO *Ability to play back may depend on recording conditions.
Important Safeguards and Precautions FrFORYOURSAFETY'READANDRETAINALLSAFETY AND OPERATING INSTRUCTIONS. HEED ALL ARNINGS IN THE MANUAL AND ON THE UNIT I 1 INSTALLATION I POWER SOURCECAUTION Operate only from a power source indicated on the unit or in this manual, ff necessary, have y,our Electric Utility Service Company or Video Products Dealer verity the power source in your home.
Safety Precautions/Mesures de sdcuritd WARNING: do not expose To prevent fire or shock hazard, equipment to rain or moisture. CAUTION: To prevent electric shock, match wide slot, fully insert. Avertissement: Afin de pr_venir tout risque dlectriques, ne pas exposer une humiditd excessive.
Congratulations on your purchase of one of the most sophisticated and reliable products on the market today. Used properly, it will bring you years of enjoyment. Please fill in the information below. The serial number is on the tag located on the back of your DECK. • Date of Purchase • Dealer Purchased From • Dealer Address • Dealer Phone No. • Model No • Serial No. [] Remote Control LSSQ0374 (PV-D4743) LSSQ0375 (PV-D4743S) '@ Disc type DVD (DVD-Video) _.
I]L,_J_wJ_w_ LwJJ Important _w_l ILILS_J Safeguards and Precautions ............................ 2, 3 Before Using ............................................................................ DECK & Cassette Information ........................................... Location of Controls 4 6,7 ....................................................... 8 ~ 10 Displays (On Screen Displays and Multi Function Display) .................... 1 1 Connections ...................................................
Playing older or damaged tapes may eventually cause video heads to become clogged. Video Head Clog Sensor During playback, this screen appears if clogging is detected. To remove screen, press PLAY on the remote or DECK. • Use "dry" type head cleaning cassette only. (Part NO.NV_TCL30PTis recommended.) • Follow cleaning tape instructions carefully. Excessive use of tape can shorten head life. • If head clog symptoms persist, contact your nearest servicenter by visiting our Web Site (see p. 55).
Power Source: Power Consumption: Video Signal: Video Recording System: Audio Track: Tuner: Broadcast Channels: CABLE Channels: Input/Output Terminal: input Terminal: Output Terminal: Operating Temperature: _vPeerating Humidity: ight: Dimensions: 120 V AC, 60 Hz Power On: Approx. 32 watts, Power Off: Approx.
[_ei_";J._ILeJl LeJl L_eJII3LeJIE:'] Bold: Italic: Bold Italic: Normal: EJECT/ OPEN / CLOSE pp. 20, 22 VCR Function DVD Function VCR and DVD Functions Others j INPUT p. 35 jJ TV mode p, 28 PC NUMBER CHANNEL& / • TRACKING/V-LOCK pp. 6, 21 keys VOLUME AC_ON pp. 18, 47 ADD/DELETE / CLEAR pp. SET VCR mode p. 28 +/p, 28 19, 39, 46 MENU p, 38 SELECT AV<, STOP pp. 20, 22 DVD mode p. 28 PLA Y pp. 20, 22 SKIP SKIP p. 23 TITLE p. 38 ZOOM FAST FORWARD / SEARCH/SLOW+ pp.
Bold: Italic: Bold Italic: Normal: VCR Function DVD Function VCR and DVD Functions Others STOP/EJECT p. 20 FAST FORWARD/SEARCH p. 20 PLAY p. 20 REWIND/SEARCH p. 20 If the disc cannot be removed... First, unplug DECK. Then, prepare a rigid wire (e.g. an extended paper clip) and, applying moderate force, insert it straight into the hole at the base of the tray. The tray will eject a little. Now, pull the tray all the way out and remove the disc. Over 2 inchesio_,2_,_s Cassette Compartment p.
='. " l • I I'][I Bold: VCR Function Bo/d ltalic: VCR and DVD Functions Italic: DVD Function VHF/UHF Antenna Output Terminal p.t2 AC Power Plug • While plugged into an AC outlet, this DECK consumes 4 W of electrical power in off mode. VHF/UHF Antenna Input Terminal p. 12 Component Video Output Connector (Y, P_, PR) (DVD Only) p. 13 Optical Digital Audio Output Connector (DVD Only) p. 15 VideoOutput Connector p. 12 S-Video Out Connector (DVDfo,0nlY)f3 PP. Videolnput Connector p.
Function & Channel Displays CH08 When a function button is pressed, e.g. PLAY, or you change channels, a 5-second display appears. VCR Status & Clock Displays TO display or remove overlay at right, ÷ press DISPLAY. Blank Tape/No indications Current Time Channel / 12:00AM CliO2 i_$Ap MONO Tape Speed (See p. 6.) VCR mode Indicator Lights up when DECK is VCR mode. DVD mode Indicator Lights up when DECK is DVD mode. Tape Indicator Lights up when a tape _._ is inserted.
• If your"IV has AUDIO and VIDEO IN terminals, connect them to DECK for higher quality picture and sound. • You can enjoy stereo sound even if your TV is not stereo by connecting a stereo amplifier to DECK. • Connect DECK and TV with an RF Coaxial Cable _ (supplied) or an AV Cable @ (net supplied) as shown in the figure below. II DSSReceiver_DECK_TV II DECK_TV III Cable Box d_DECK_I, TV Disconnect antenna or oab{e _'rom TV and connect to DECK.
• With a Cable Box (DECK_Cable D _D/_C_ Box=I_TV) DECK • Connect VIDEO • use Remote Control to select channels without using Multi-brand coDtFo] fe2,ture. With Two Cable Boxes D VD/VCR DECK _NT"I I O record scrambled channels. (including scrambled) channel TV O • viewany Cable Box TV • record and view both scrambled and unscrambled channels if additional equipment is added. This connection requires: two converter boxes, an A/B swffch, and a 2-way splitter.
I_ [] Ready Checklist Turn down the volume, then turn DECK, as well as other equipment to be connected, off before proceeding with connection. Do not block ventilation holes of any of the equipment and arrange them so that air can circulate freely. Read through the instructions before connecting other equipment. Ensure that you observe the color coding when connecting audio and video cables.
• Connecting Amplifier DECK,I'Dolby Digital DECK,_ (5.1 ch Surround system) [Digital Decoder =l,Amplifier,bSpeaker or DTS (digital theater systems) Decoder =l,Amplifier connection] =l,Speaker When DVDs recorded in Dolby Digital or DTS are played, Dolby Digital bitstream or DTS bitstream is output from the DECK OPTICAL digital audio output connector. When DECK is connected to a Dolby Digital decoder or DTS decoder, you can enjoy theater-quality audio in your home.
Turn TV on. See connections (_ RF Coaxial Cable Connection and @ AV Cable Connection on p. 12. Set TV to channel 3. Set TV to VIDEO. 3 [DECK "_ TV] • Go to "Doing Initial Setup (Ready to Play)." (See below.) [Cable Box ÷ DECK ->- TV], [DSS ->- DECK ÷ TV] • Turn on Cable Box and set it to your Public Broadcasting Station (PBS) channel in your time zone. • If you use a DSS Receiver, it must be turned off. Press VCR on remote for VCR mode.
Settings are is made automatically. When setup done, this screen appears. EJECT 6/8/2003SUN 2:20PM DST :ON SETTING A_O @D(fO @O,4_.". : CH CLOCK IO SET CO_.IPLETED 9_ If "AUTO CLOCK SET IS INCOMPLETE" appears, manually set clock. See below. ACTION AV,<, @_ SELECT AUTO CLOCK I NCOMPLETE SET IS PLEASE SET CLOCK BY PRESSING ACTION KEY (_._ -- SET -- VCR @(DO(D', ,_ If Auto Clock Set was incomplete. Press ACTION* CLOCK screen.
1 Press ACTION* MENU SET CLOCK SET UP CHANNEL ID_OMNLANGUE : ENGLESN VCR'S OUTPUT CH:3 _ELECT EXET • : • • : ACTEON to display MENU. SET:SET • Language 1) Press AT to sele0t language item. SET SET MENU UP VOR CLOCK VCR_S OUTPUT _ELECT_• _×_T • _ACT_ON UP VCR CLOGK "rl_l EDIOM/JLANGUE VCR'S OUTPUT CH_3 SET,SET SELECT _ EXiT PI_EPARAR VCA FMAR RELOj FUAR CANAL DE SALIDA Channels • 1) Press AV to select "SET UP CHANNEL," and press SET.
*Important: ifa remote control button does network whenpressed, press the VCR button -- POWER on the remote and try the button again. --CH &Iv NUMBER keys • TimeZoneAdjust (on_y_ _o clot. _ssou • 1) Press Ay to select "SET CLOCK," and press SET, 1) Press AV to select "VCR'S OUTPUT CH.," and press SET, MENU S_1" Up VQR _1 l : ACTION 2) Press _lkT to select "TIME ZONE ADJUSTs" SET I _ELECT:A V EXET : _,CTEQN SET VCR _ET: ACTION _ET 2) Press SET.
I_ [1 [_ [_ [1 All connections are made (pp, 12 - 15). TV and DECK are plugged in, TV is on and tuned to OH 3, 4, or VIDEO. Remote is in VCR mode. (Press VCR.) 1 -- CH_ lo Insert a tape. • DECK power comes on. If Auto VCR/TV (see p.32) is set to "OFF," press VCR/TV on the remote to be VCR mode. STOP Press PLAY* to play a tape. If tape has no rec. tab (p, 6), auto play begins. REW/ SLOW- Special Features During Play • EJECT_ Ready Checklist Forward/Reverse Scene Search ..
1 Insert a tape with a record This video recorder, equipped with HQ I (High Quality) system, is compatible with existing VHS equipment. Only use I tapes with the I_ mark. Only tapes tested and inspected for use in 2, 4, 6, and 8 hour machines are recommended. tab (p. 6). • DECK power comes on. If Auto VCPJTV (see p,32) is set to "OFF," press VCR/TV on the remote to be VCR mode. Press OH Av, or NUMBER keys to select the channel. • For "LINE" input, see p. 35.
[_ Ready Checklist [] [] [] Press All connections are made. (pp. 12 - 15) DECK is plugged in. If DECK is connected to an audio amplifier, turn the stereo system's power on. _ _ n_ NUMBER keys SELECT f j J SET STOP REW/ SLOW- FF// SLOW+ or O MENU AV<• ,,D0 0 C_ 2oo2 VSS PAUSE/f STILL RETURN CLOSE I pressing I READING i [ • You may also close tray by If an interactive DVD *_ or a Video CD with playback control .2 is used and TITLE MENU appears, go to step 5.
• Forward/Reverse Scene Search Press FF/SLOW+ or REW/SLOW. during play. Press PLAYto release. • Startingforward/reversesearch duringplay startedfrom menu on VideoCDs may recall menu. • Search speed, slow at first, increaseswith each additional press of the button up to 5 levels. • Forward/Reverse Chapter/Track Skip Press $KIPI_IN or I_NI SKIPduring play. Each press skips a chapter (DVD) or track (Video CD/CD).
[_ [] [] [] [] [] [] Ready Checklist All connections are made (pp. 12 - 15). TV and DECK are plugged in. Clock set correctly. (p. 18) Tape has rec.tab. (p. 6) Remote is in VCR mode. (Press VCR.) Sufficient tape remaining for recording time. POWER _EI® o®® i (]D0 (£, (£_i Press PROG* to display Program. 1) To set record DATE, press Ai,v to select: 1~31= one time, or DAILY= MON~ FRI, or WEEKLY= same time each week and press SET. • See selection order left. Example Today L r14...
I_ Ilil!llVlSllt iillliiil'ililll i_ _i'lii _a'l'_ Review, Replace or Clear Program (Recording Contents: is not in progress) To cancel a Timer Recording in progress... Press PROG to display ProgrammList. to select number and press SET to display. Press ,i'll" _ Hold down STOP in VCR mode for a few seconds to cancel the Timer Recording. (The "TIMER" Indicator goes out on Multi Function Display.) • Any future daiJy or weekly recording will be performedas programmed. To Replace program...
Connection Make the Audio/Video Connection as shown on pp. f2 ~ 15. • You can use TV connected to a Stereo amplifier and speakers instead of Stereo TV. The following are possible audio broadcast types and onscreen displays. The signal being received is indicated with an "(£' mark while the selected audio mode is indicated with an arrow. (D (73 O0 (_ To display the broadcast signal being received, ÷ press DISPLAY*.
Press AUDIO (SAP/Hi-Fi) to display audio mode. (Display disappears after 5 seconds.) Press AUDIO (SAP/Hi-FI) to select desired mode. repeatedly • Refer to Recewable Broadcast • Arrow indicates selection. Types on p. 26. Make a recording. See p. 21. Start playback. See p. 20. Press AUDIO (SAP/Hi-Fi) to display audio mode. H_Ft:L/R HIF_:L HIF_:R NORMAL • Press AUDIO (SAP/Hi-FI) to select desired mode.
The Remote Control can be set to control some TV functions. POWER Find your page. TV Brand Code Number on the following 2 Set up for TV control, -_ hold down TV button, -_ enter code with NUMBER keys. • If code number is 100 or greater, -_- e.g., press 1 - 0 - 2 for 102. QQ®_: (_ (_) (_ _ NUMBER 0 keys (_O_T(_ Confirm code entry, -_ press POWER to turn selected unit on or oft. • See table below for controllable functions in each mode. =,_(_ • Repeat setup after remote battery replacement.
I iv| .1 r. i iilil_ [-.ill I Panasonic ....................... Quasar ............................ }:_CA ill i 01, 02 01, 02 ....................................... 63 GE ......................................... Zenith .................................... 03 04 Magnavox .............................. 05 Sylvania ................................ 05 Sharp ............................... 06,07 Sony ...................................... 08 Toshiba ................................. 09 Sanyo .....
Search System For each recording, an invisible index mark is placed on the tape. A program index and information are also included for timer recordings. These marks are used to access or scan recordings. i]1_e_[,.--t,jt_=]o ENTER _NDEX NUMS£R USENG I gKEYS :1 FORWARD SEARCH :FF R£VERSE _NDE× S£AF=CH £EARCH :REW NE×T :SE'_F=CH £X_T ;STOP 2 Press SEARCH* to display SEARCH in Stop or Play mode, and then press NUMBER keys to select recording number. • To calculate number, see below.
• Auto Play Insert a tape '_ Power comes on, •- Play starts if there is no record tab (see p. 6). • Auto Rewind Play Fast Forward,.J "_ Tape end ,_ Rewind • Play Auto Eject (Repeat Play must be off) Play -_ Tape end --_ Rewind ÷ Tape ejects if set some programs. ®®0® ®®®qi (E_(_ @l}(}£_d __ G Q =%_1 NUMBER keys e®Q o@o/ -_ _ REWiSLOW- -- FFiSLOW+ -- CM/ZERO --SEARCH VCR fast forwards (skips) over f-3 of recorded tape, Press CM/ZERO in _ minutes mode.
I_rIl,T_l_rJi_ • Set to playback a recording over and over. . -. : The VCR/TV selection can be set to auto or manual. Press ACTION* to display MENU. r MENU SET UP CH*_Nr_EL ED_OMNLAr_GuE _ENGLISH VCR'S OUTPUT CH_3 Press ACTION to display MENU. Press AW!' 4 to select "SET UP VCR," and press SET. / r _E.O vcR$ _ELECT:& • SET:SET E×,T :_c_o. F _ ._ _c. _UTO VO_ _0_ _,_._._ _ELE_ :A • Et_b _ Press and press SET to set "ON" or "OFF." o.
®®o@ When "ON," picture is displayed regardless of signal strength. Press ACTION to display MENU. ACTION _P_-_ SET UP VGR 2[ .... s_ c,o_, VCR$ AV
"- • - . _ • *Important: If a remote control button does button not work when pressed, press the VCR on the remote and try the button again. If Multi-brand feature is used (p. 28), and this feature is set to on, a warning appears whenever an invalid key is pressed in TV mode. ,NPUT Press ACTION* to display MENU. MEnU _ET CLOC_ _ET UP CHA_NEL VCR'_ OUTPUT CH:3 J_O_LANGUE _ELECT;A • : E_U_H SET;SET Press AV to select "SET UP VCR," and press SET.
Connection D VD/VCR DECK VCR/ Camcorder (Hi-Fi) TV Front of DECK V_DE01N2L-AUD[0IN2-£ 7 o o o / (Audio/Video In Terminals on the front of DECK are available) (_ Connect VIDEO OUT terminal on Playing VCR to VIDEO IN terminal on DECK. To monitor the dubbing, also connect TV as shown. (_ Connect "L" and "R" AUDIO OUT terminals on Playing VCR to "L" and "R" AUDIO IN terminals on DECK. In place of Playing VCR, you can use other equipment, such as a Camcorder.
i-JFl Lw4 It _IP You can select a different subtitle language (if offered) than the one set at the Settings for DVD Operation. (See p. 47.) Press SUB TITLE* in Play mode to display the subtitle selection On-screen. • Display disappears 5 seconds. [] Ready [Subtitle language] [Audio sound track language] after • When no subtitles are offered, "-" will be displayed instead of the language number. 2 Press &V to select a language. Press • • to select "ON" or "OFF.
When on the screen while a buttonQ_isappears being operated, it means that the corresponding operation prohibited by DECK or the disc. is • • J ,,_ o I II 0 ANGLE in Play mode to display the angle selection on-screen. Indicator ° The ANGLE Indicator lights up on DECK when a scene recorded at different angles is detected. • The angle number can be set beforehand so that the angle is switched whenever the ANGLE indicator _ightsUp.
Some DVDs have more than one title, e.g. movies. If the disc offers a title menu, you can select the desired title number. (Operation may vary according to the disc.) 1 Press TITLE* in Play mode to display the title screen. 2 TITLE MENU Birds of the world Press AV
==_II[°I'_I_]=JlI"]I_&r=['r_'iI']ITLI']I]FR'IL!'JIBB _ You can programspecifictracks and order of play. [] DECK is in DVD mode, press DVD. [] Video CD or CD is inserted. Ready Checklist Press ACTION to display DVD MAIN MENU. Press Ai,V to select "PLAY MODE," and press SET te d{sptay. _VD MA_N MENU 4 ;ACTIO_Z ;• • ,__.-_ _'_._ _ Press &Y'd • a 0, ,o _ ' to select a track _o_ ._,_ _o,, _ _ number (Track o_, _s_ numbers on disc are SE,ECT_"• ' ' displayed.), and SET _"° _'°" press SET.
E_ [] Ready Checklist DECK is in DVD mode, press DVD. Tracks are played in a random order. *Important: If a remote control button does not work when pressed, press the DVD button on the remote and try the button again. Press ACTION* to display DVD MAIN MENU. D_sc A_D_O_,GUAGES O_[PUT ST_LL MODE TV MODE AUTO 43 LeIlerbox _oc_:_w_, i_._A_......... ._ ._E_EC_ :.. SET : S£T END to select "PLAY MODE," and press Press SET AV to display.
When DISPLAY is pressed, On-Screen Displays show disc information (title/chapter/track number, elapsed playing time) and DECK information (repeat play, play mode) I_ Ready Checklist [] DECK is in DVD mode, press DVD. Press DISPLAY in Play or Stop mode to display "On-Screen Displays." • Each press of DISPLAYchanges the on-screen display as follows. (Refer to p.
• Disc information screen (for DVD) 1. TITLE No. • Select "TITLE", and press SET*. *Change the No. by pressing AV or NUMBER keys, and press SET 2. CHAPTER NO. • Select "CHAPTER", and press SET *Change the No. by pressing 4,V or NUMBER keys, and press SET 3. Disc currently being played 4. Elapsed playing time The screen may be changed by selecting the elapsed time. • Select the elapsed playing time ("xx:xx:xx"), and press SET • Change the elapsed time by pressing NUMBER keys.
This unff can play MP3/WMA/JPEG format CD-R or CD-RW recorded for personal use on a PC, etc. Some discs may not play due to the condition of the recording. Press POWER on the remote or DECK. Press OPEN/CLOSE, then place an MP3/WMA/JPEG the disc tray. Press OPEN/CLOSE to close. disc into appears green.) [ I,_J:MP3 file _:WMA C3:Folder r_n:Parent __:JPEG r Parent folde File area _ _MAL ...... OE:.O_AL I PLAY •ODE file !Selected file/ / folder is highlighted.
You can play back JPEG images, Displayable _)o Image Size: 32x32-768Ox7680 pixels Some JPEG format may not be played back, Do steps 1-3 on page 43. Press AWl' to select an JPEG file ([_). Press SETor PLAY. Selected JPEG file is displayed. [JPEG Playback Screen] • • • • • Returned on the MP3/WMA/JPEG ,,_ Press STOP. (See p.43) Next/Previous Search ,J Press SKIPIt, l_l or I_ SKIP. MENU B Select PLAY MODE [JPEG Slide-show] (During STOP mode) (See p.
(During JPEG Playback.) You can enlarge specific portions of a JPEG picture and select the zoom ratio using the ZOOM button on the remote during JPEG Playback screen. Set Zoom size. ® Press ZOOM repeatedly to change display as follows. ,_ Press STOPto return the MP3NVMA/JPEG MENU. • You can enlarge the center portion of the image to one of 2 magnifications. • Operation can be done during Rotation (below). ,lq Q°® I ®®® ACTION X 1 0 (OREGINAL) X 15(ZOOM 1) X2 0(ZOOM 2) SELECT AV4P_ STOP _.
You can prevent playback of DVDs of a specific rating level which may be unsuitable for children. • Some DVDs are encoded with a rating level. If the disc rating is higher (stricter) than the one you preset, playback will be prohibited. A 4-digit code must be entered to view a blocked program or change rating settings. Press ACTION* to display DVD MAiN MENU. Press AI,V to select "PARENTAL LOCK," and press SETto display.
Press ACTION to display DVD MAIN MENU. Press &Y to select an item, and press SET. Once initial settings are done, they remain in memory (even after power off) until changed. This means DECK will operate under the same conditions (especially DVDs) each time. _IP [] DISC LANGUAGES (See below) All languages offered on the disc can be set. If the language not offered is set, the original disc language will be selected. AUDIO OUTPUT (See p. 48.
_!_7J I_ Ee]T_*_1 Select the digital output to be output from the optical digital audio output connector of DECK. Press ACTION* to display DVD MAIN MENU. 2 Press A,V to select "AUDIO OUTPUT," and press SET to display screen. 3 Press AV to select an item, and press SET repeatedly for output. (See below.) Ready Checklist DECK is in DVD mode, press DVD.
Set to reduce jitter in a displayed still picture or a motion picture, Press ACTION to display DVD MAIN MENU. Press &Y to select "STILL MODE," and fpress SET repeated)y or mode. (See below.) ®dYO@ ®®®d ®®®@ ®®®@ SELECT AUTO: "FIELD" (Field Still) or "FRAME" (Frame slit 0 is automatically selected during the still mode. (Factory preset) FIELb: "FIELD" (Field still) is a_ways selected, This setting will reduce j_tter when compared with "AUTO" on some discs. ,_ -- _,T<).
Enter the appropriate code number for the initial settings "AUDIO", "SUBTITLE" "MENUS" (see p. 47). ode.
These displays will alert you to a missed operation or provide further instruction_' .Z PLEASE SET CLOCK BY PRESSING ACTION KEY If you attempt to set or review a Timer Recording and the Clock is not set.., 24 PLEASE PREPARE REC If DECK is not in Stop mode or a cassette with record tab is not inserted 2 minutes before a Timer Rece_ding is about te begin... 24 25 FOR TIMER CHECK CASSETTE RECORD TAB If you press REC or_ the remote control or DECK, and a cassette is inserted with no record tab...
;heck the following points if you are having trouble with your DECK. Completely insert Power Plug into an AC outlet. Set POWER button to on. Make sure power source is active. No power... Power turns itself off... I:T_"_ _lf'_X,,_l,_l_"_ • Auto power-off (shutoff) occurs after about 5 rain. in DVD mode with no operation, or if there is no broadcast signal in TV or Playback mode. Turn the power back on. (pp. 23, 33) _ I TV program cannot be recorded...
;heck the following points if you are having trouble with your DECK. Play falls to start even when PLAY is )ressed._ • This DECK cannot play discs other than DVDs, Video CDs and CDs. • The disc may be dirty and require cleaning. Play starts but then stops immediately... • Be sure disc is installed with label side up. Picture is distorted during rapid advance or rapid reverse... • The picture will be somewhat this is normal.
PANASONIC CONSUMER ELECTRONICS COMPANy, DIVISION OF MATSUSHITA ELECTRIC CORPORATION OF AMERICA One Panasonic Way Secaucus, New Jersey 07094 PANASONIC SALES COMPANY, DIVISION OF MATSUSHITA ELECTRIC OF PUERTO RICO, INC., AVE. 65 de Infanterla, Km. 9.
Limited Warranty Limits And Exclusions This warranty ONLY COVERS failures due to defects in materials or workmanship, and DOES NOT COVER normal wear and tear or cosmetic damage, nor does it cover markings or retained images on the picture tube resulting from viewing fixed images (including, among other things, letterbex pictures on standard 4:3 screen TV's, or non-expanded standard 4:3 pictures on wide screen TV's, or enscreen data in a stationary and fixed location).
[lie] ! I :Iit [o] 11it.'ILilo] ! I l [ll I1 :l'-llt [o] 111 ! I [it I-'I I!111 :I'-1 ll'll (ol ".lI!'-I'I| Realice la conexi6n de la anlena oTV por cable antes de enchufar el cable de CA, El DVDNCR inioiar_ autom_iioamente la fijaci6n de los oanales Y del relojal enohufar el cable de CA. Para Ant/Cable ÷ DVD/VCR ÷ TV (_ Conecte el cable de la antena al terminal FROM ANT del DVD/VCR. IN (_ Conecte el terminal OUT TO TV del DVDNCR a la entrada de la antena VHF/UHF del TV con el cable RF incluido.
1 2 Inserte un cassette, • La alimentaci6n del DECK se active. En la Pantalla de Visualizeci6n Multi Funci6n se ilumina "VCR". Presione PLAY pard reproducir el cassette. • Si el cassette no tiene le lengQeta de prevenci6n de grabaci6n (pAgina 6), se inicia la reproducci6n eutom_ticamente. I Detalles • • • • 3 • • 1 Presione PROG para visualizar ]a pantalla de Programacion. especiales durante la grabacidn /HOY Orde_ pare eteqir Ejemplo I]';ll'; I I';. ill I';l* _,..8-9..-.
• !" - •l- •o o olil]llllill] Presione aparato. POWER en el control remoto o el Presione DFD para seleccionar el modo DVD. 1 ) Preeione OPEN/CLOSE. 2) Ponga un disco en la bandeja de disco. • Sujete el disco sin tocar ninguna de sus superficies, p6ngalo con el Iado donde este impreso el tftulo hacia arriba, alineelo con las gufas y p6ngalo en su posici6n apropiada. Disco de 3"(8 cm) / Disco de 5" (12 cm) Presione PLAYpara iniciar la reproducci6n. La bandeja del disco se cierra autom&ticamente.
Cuando se presiona DISPLAY, la visualizaci6n en pantalla muestra la informaci6n del disco (tffulo / capffulo / n_mero de lista, tiempo transcur_do de reproducci6n, audio / idioma del subtffulo, y _ngulo) e informaci6n (repetir la reproducci6n, modo reproducci6n, Karaoke vocal encendido / apagado, etc.). Presione DISPLAY en el modo reproducci6n o parada para visualizar ]as visualizaciones en pantalla. • Cada vez que se presione DISPLAY, la visualizaci6n en pantalla cambia como se muestra a continuaci6n.
Algunos discos con peliculas, v{enen con dos o mas titulos. Por ejemplo, si el disco tiene un men_ de titulos grabados, el bot6n TITLE podr& utilizarse pare seleccionar el titulo de la pelicula. Presione reproducci6n. Ahora se TITLEdurantela visualize una lista de los tffulos del disco. Algunos discos DVD ofrecen un ment_ especial. Este menQ incluye gufas para contenidos Qnicos, audio, subtitulos, idiomas, etc.
Presione DVD para seleccionar el modo DVD. Presione visualizar ACTION MENU. de parada para Seleccione en el modo "AUDIO" (Fijaci6n de f&brica : ingles) Ingles / Espa_ol / Frances / Japonesa : Original : Se se]eccionar& el idioma Presione Presione AV SE'_ para seleccionar el artfculo deseado. original de cada disco. IDIOMAS DEL DISCO OTRO **,_ : Se puede seleccionar el otto Todos los idiomas ofrecidos en el disco pueden ser idioma. ajustados.
A ACTION button ................................. 8, Accessories ............................................ ADD/DELETE button (Add or Delete a C_nel) .................. 8, Audio Broadcast types (Stereo/SAP/Mono) ............................ Audio Mode (Playback, Recording).... Auto Operation Functions .................... Auto Shut-Off ........................................ B Batteries ................................................. 18 4 19 26 27 31 33 4 C Channel ("SET UP CHANNEL") ..........
A ACTION button ................................. 8, ANGLE button (Multiple Angle Viewing) ......... 8, 37, AUDIO button (Audio Soundtrack Language) ....... 8, Audio Output (For Selecting Audio Output) ............. Auto Power Off Function ...................... 47 45 36 48 23 C CLEAR button ............................ 8, 39, 46 Component Video Output .............. 10, 13 D Disc Languages ................................... DISPLAY button ("On-Screen Display") .................... 8, DTS ...............
Panasonic Consumer Electronics Company, Division of Matsushita Electric Corporation of America One Panasonic Way Secaucus, New Jersey 07094 Panasonic Sales Company ("PSC"), Division of Matsushita Electric of Puerto Rico, Inc. Ave, 65 de Infanteria. Km, 9.