Operating Instructions Model No. PV-D4761 Initial Setup (Connection) DVD/VCR DECK Basic Operation VCR Operation As an ENERGY STAR ® Partner, Matsushita Electric Corporation of America has determined that this product or product model meets the ENERGY STAR ® guidelines for energy efficiency. Please read these instructions carefully before attempting to connect, operate or adjust this product. Please save this manual. Spanish Quick Use Guide is included.
Important Safeguards and Precautions FOR YOUR SAFETY, READ AND RETAIN ALL SAFETY AND OPERATING INSTRUCTIONS. HEED ALL WARNINGS IN THE MANUAL AND ON THE UNIT INSTALLATION 1 POWER SOURCE CAUTION Operate only from a power source indicated on the unit or in this manual. If necessary, have your Electric Utility Service Company or Video Products Dealer verify the power source in your home.
Safety Precautions/Mesures de sécurité WARNING: To prevent fire or shock hazard, do not expose this equipment to rain or moisture. CAUTION: To prevent electric shock, match wide blade of plug to wide slot, fully insert. Avertissement: Afin de prévenir tout risque d’incendie ou de chocs électriques, ne pas exposer cet appareil à la pluie ou à une humidité excessive.
Before Using Disc formats supported by this DECK Congratulations on your purchase of one of the most sophisticated and reliable products on the market today. Used properly, it will bring you years of enjoyment. Please fill in the information below. The serial number is on the tag located on the back of your DECK. • • • • • • Date of Purchase Dealer Purchased From Dealer Address Dealer Phone No. Model No. PV-D4761 Serial No.
DVD / VCR Important Safeguards and Precautions ............................ 2, 3 Before Using ............................................................................ 4 DECK & Cassette Information ........................................... 6 , 7 Location of Controls ....................................................... 8 ~ 10 Displays (On Screen Displays and Multi Function Display) ..................... 11 Connections ..................................................................
DECK & Cassette Information Prevent Accidental Tape Erasure Head Cleaning Playing older or damaged tapes may eventually cause video heads to become clogged. Video Head Clog Sensor During playback, this screen appears if clogging is detected. To remove screen, press PLAY on the remote or DECK. Break off the tab to prevent recording.
Input/Output Terminal: Input Terminal: Output Terminal: Operating Temperature: Operating Humidity: Weight: Dimensions: Discs Played (1) DVD-VIDEO Disc (one layer per side) (2) Compact Disc (CD-DA, VIDEO CD) Digital Audio Output: Pickup: 120 V AC, 60 Hz Power On: Approx. 32 watts, Power Off: Approx. 4 watts EIA Standard NTSC color 4 rotary heads helical scanning system 1 track (Normal), 2 channel (Hi-Fi Audio Sound) Initial Setup (Connection) ucts@panasonic.
Location of Controls Remote Control EJECT/ OPEN/CLOSE Bold: VCR Function Italic: DVD Function Bold Italic: VCR and DVD Functions Normal: Others LIGHT pp. 20, 22 TV mode POWER p. 32 VCR mode DVD mode p. 32 p. 32 DSS/CABLE mode INPUT p. 39 p. 32 PLAY FAST FORWARD/SEARCH/ SLOW+ pp. 20, 22 pp. 20, 23 REWIND/SEARCH/ SLOW- PAUSE/STILL pp. 20, 23 pp. 20, 23 STOP VCR/TV pp. 20, 22 p. 21 ADD/DELETE/ CLEAR NUMBER keys pp. 19, 43 RETURN/ SEARCH SURROUND/ ENTER pp. 22, 34 pp.
Bold: VCR Function Italic: DVD Function Bold Italic: VCR and DVD Functions Normal: Others If the disc cannot be removed... First, unplug DECK. Then, prepare a rigid wire (e.g. an extended paper clip) and, applying moderate force, insert it straight into the hole at the base of the tray. The tray will eject a little. Now, pull the tray all the way out and remove the disc. STOP/EJECT p. 20 FAST FORWARD/SEARCH p. 20 PLAY p. 20 Over 2 inches REWIND/SEARCH p.
Location of Controls (continued) Bold: VCR Function Italic: DVD Function Bold Italic: VCR and DVD Functions Rear View of DECK VHF/UHF Antenna Output Terminal p.12 AC Power Plug • While plugged into an AC outlet, this DECK consumes 4 W of electrical power in off mode. VHF/UHF Antenna Input Terminal p. 12 Component Video Output Connector (Y, PB, PR) p. 13 (DVD Only) Video Output Connector p. 12 Video Input Connector p.
On Screen Displays (VCR) 08 When a function button is pressed, e.g. PLAY, or you change channels, a 4 second display appears first in large and then small characters. Initial Setup (Connection) ucts@panasonic.com Displays (On Screen & Multi Function) Blank Tape/ No Video Signal Indication Whenever a blank section of a tape comes up in Play mode, or when the selected channel has no broadcast signal with Weak Signal Display Feature (p. 37) set to OFF, the TV screen will turn solid blue.
Connections Basic Connections • If your TV has AUDIO and VIDEO IN terminals, connect them to DECK with AV Cable for higher quality picture and sound. • You can enjoy stereo sound even if your TV is not stereo by connecting a stereo amplifier to DECK. • Connect DECK and TV with an RF Coaxial Cable a (supplied) or an AV Cable b (not supplied) as shown in the figure below.
You Can ■ DECK Cable Box TV DVD/VCR DECK ANT or CATV IN 1 OUT TV IN FROM ANT. IN Cable Box VHF/UHF OUT TO TV IN OUT VHF/ UHF R L • view any (including scrambled) channel. AUDIO • use Remote Control to select channels without using Multi-brand control feature. ■ Connect With Two Cable Boxes DVD/VCR DECK or OUT Cable Box CATV IN IN 1 IN FROM ANT. OUT VHF/UHF OUT TO TV 2-Way Splitter Cable Box OUT 1 OUT 2 IN OUT A/B Switch IN 1 IN 2 • record scrambled channels.
Connections (continued) Audio Connections Ready Checklist Turn down the volume, then turn DECK, as well as other equipment to be connected, off before proceeding with connection. Do not block ventilation holes of any of the equipment and arrange them so that air can circulate freely. Read through the instructions before connecting other equipment. Ensure that you observe the color coding when connecting audio and video cables.
Decoder with Dolby Digital Amplifier Speaker or Initial Setup (Connection) ucts@panasonic.com ■ DECK dts (digital theater systems) When DVDs recorded in Dolby Digital or dts are played, Dolby Digital bitstream or dts bitstream is output from the DECK optical digital audio output connector. When DECK is connected to a Dolby Digital decoder or dts decoder, you can enjoy theater-quality audio in your home.
Initial Setup for Basic Connections Before doing Initial Setup 1 2 3 Turn TV on. See connections a RF Coaxial Cable Connection and b AV Cable Connection on p. 12. Set TV to channel 3. Set TV to VIDEO. [DECK-TV] • Go to “How to do Initial Setup.” (See below.) [Cable Box-DECK-TV], [DSS-DECK-TV] • Turn on Cable Box and set it to your Public Broadcasting Station (PBS) channel in your time zone. • If you use DSS Receiver, it must be turned off.
5 SELECT CONNECTION CABLE / DSS BOX VCR TV CABLE / DSS BOX OUTPUT CH CH 0 1 Press to select the same channel as the Cable Box or DSS Receiver output channel. Press SET to enter. Initial Setup (Connection) ucts@panasonic.com *Important: If a remote control button does not work when pressed, press the VCR button on the remote and try the button again. SELECT : SET : SET EXIT : ACT I ON 6 CHANNEL / CLOCK AUTO SET Press CH to start “CHANNEL/CLOCK AUTO SET.
Reset Language, Channels, Clock 1 MENU SET UP DVD SET UP VCR SET CLOCK SET UP CHANNEL IDIOMA/LANGUE : ENGLISH VCR’S OUTPUT CH:3 Press ACTION* to display MENU. • ACTION and PROG/VCR+ buttons are not available when using Component Video Output and S-Video Out. Please set TV to either RF INPUT or VIDEO INPUT, and then press ACTION or PROG/VCR+. SELECT : SET:SET EXIT : ACTION 2 Language 1) Press to select language item, and press SET repeatedly.
*Important: If a remote control button does not work when pressed, press the VCR button on the remote and try the button again. POWER NUMBER keys Time Zone Adjust (Only when Auto Clock is set.) 1) Press to select “SET CLOCK,” and press SET. MENU SET UP DVD SET UP VCR SET CLOCK SET UP CHANNEL IDIOMA/LANGUE : ENGLISH VCR’S OUTPUT CH:3 SELECT : SET : SET EXIT : ACTION 2) Press to select “TIME ZONE ADJUST,” and press or to subtract or add hour(s) as necessary.
Playback/ Record on a Tape Ready Checklist DVD EJECT All connections are made (pp. 12 ~ 15). TV and DECK are plugged in. TV is on and tuned to CH3, 4, or VIDEO. Remote is in VCR mode. (Press VCR.) Playback a Tape 1 Insert a tape. 2 Press PLAY* to play a tape. • DECK power comes on. The VCR mode and “VCR” Indicator light up on Multi Function Display. PLAY FF/SLOW+ PAUSE/ STILL REW/SLOWVCR/TV STOP • If tape has no rec. tab (p. 6), auto play begins.
Record on a Tape 1 2 Insert a tape with a record tab (p. 6). This video recorder, equipped with HQ (High Quality) system, is compatible with existing VHS equipment. Only use tapes with the mark. Only tapes tested and inspected for use in 2, 4, 6, and 8 hour machines are recommended. • DECK power comes on. The VCR mode and “VCR” Indicator light up on Multi Function Display. Press CH / , or NUMBER keys to select the channel. • For “LINE” input, see p. 39.
Basic DVD Operation Ready Checklist All connections are made. (pp. 12 ~ 15) DECK is plugged in. If DECK is connected to an audio amplifier, turn the stereo system’s power on. OPEN/ CLOSE POWER 1 2 3 Press DVD to select DVD mode. • If a disc is already inserted, go to step 4. (Depending on the disc, playback may start automatically.) Press OPEN/CLOSE, and then place a disc into the disc tray.
*Important: If a remote control button does not work when pressed, press the DVD button on the remote and try the button again. ■ Forward/Reverse Scene Search Press FF/SLOW+ or REW/SLOWduring Play mode. Press PLAY to release. • Starting forward/reverse search during Play mode started from menu on Video CDs may recall menu. • Search speed, slow at first, increases with each additional press of the button up to 5 levels. ■ Forward/Reverse Chapter/Track Skip Press SKIP | or | during Play mode.
Timer Recording Ready Checklist All connections are made (pp. 12 ~ 15). TV and DECK are plugged in. Clock set correctly. Tape has rec.tab. (p. 6) Remote is in VCR mode. (Press VCR.) Sufficient tape remaining for rec time. 1 2 Press PROG/VCR+ button* to display “SET PROGRAM.
Review, Replace or Clear Program Contents: (Recording is not in progress) 1 2 Repeat steps 1 ~ 2 on page 24. To cancel Timer Recording in progress... P DT START STOP 1 7 9 : 00A 12 : 00A 2 8 10 : 00P 12 : 00P 3 10 8 : 00P 9 : 00P 4 SU 9 : 00P 10 : 00P CANCEL SELECT ENTER EXIT CH SPD 08 SP 02 SP 10 SP L1 LP : ADD / DLT 1-8 : : SET : PROG Press to select number and press SET to display. 3 To Replace program...
Timer Recording Using VCR Plus+ System Auto VCR Plus+ System Channel Setup (Part 1) In order for VCR to read PlusCode numbers, some setup is required. Guide channel numbers are assigned to each local broadcast and cable station. Because this number sometimes differs from the channel your TV receives the station on, it is necessary to program the VCR with local channel information. To receive VCR Plus+ channels automatically, perform the steps below.
Auto VCR Plus+ System Channel Setup (Part 2) Before you perform the following steps, you should have: • completed “Auto VCR Plus+ System Channel Setup (Part 1)” on p. 26. • left VCR off overnight, and turned it back on after 9:00 AM the next day. 1 If channel updating was successful... VCR Plus+ CH SET UP 3 VCR Plus+ CH SET UP VCR Plus+ CH SET COMPLETED PLEASE SELECT VCR Plus+ CHANNEL END NEXT : ACT I ON Press ACTION to exit this mode. 2 If VCR could not distinguish channel map...
Timer Recording Using VCR Plus+ System (continued) Initial Setup..... In order to use Timer Recording Using VCR Plus+ System, the Initial Setup on pages 16, 17 must be completed for setting Clock and Channel. Channel Setup..... Since numbers assigned to channels found in TV Guide and selected newspapers may differ from channels in your viewing area, you’ll need to enter your local TV channel number for each corresponding Guide Channel.
*Important: If a remote control button does not work when pressed, press the VCR button on the remote and try the button again. (continued) Ready Checklist Clock is set. VCR Plus+ Setup is complete (see pp. 26 ~ 28). 1 2 Press PROG/VCR+ button to display “SET PROGRAM.
MTS Broadcast/ VHS Hi-Fi Stereo System Connection Make the Audio/Video Connection as shown on pp. 12 ~ 15. • You can use TV connected to a Stereo amplifier and speakers instead of Stereo TV. Receivable Broadcast Types The following are possible audio broadcast types and onscreen displays. The signal being received is indicated with an “ ” mark while the selected audio mode is indicated with an arrow. To display the broadcast signal being received, --> press DISPLAY* .
Audio Mode for Recording 1 Press AUDIO to display audio mode. (Display disappears after 5 seconds.) 2 STEREO SAP MONO Press AUDIO repeatedly to select desired mode. • Refer to “Receivable Broadcast Types” on p. 30. • Arrow indicates selection. 3 Do a recording. See p. 21. VCR Operation ducts@panasonic.com *Important: If a remote control button does not work when pressed, press the VCR button on the remote and try the button again. Audio Mode for Playback 1 2 3 Start playback. See p. 20.
Multi-Brand Control Feature Multi-Brand Control Setup The Remote Control can be set to control some TV and Cable Box/DSS functions. 1 2 POWER VCR Find your TV and Cable Box/DSS Receiver Brand Code Number on the following page. DSS/ CABLE Setup for TV control, -->hold down TV button, -->enter code with NUMBER keys. TV Setup for Cable or DSS control, DVD -->hold down DSS/CABLE button, -->enter code with NUMBER keys. • If code number is 100 or greater, -->e.g., press 1 - 0 - 2 for 102.
Panasonic ........................ 01, 02 Quasar ............................. 01, 02 RCA ....................................... 03 GE ......................................... 03 Zenith .................................... 04 Magnavox .............................. 05 Sylvania ................................. 05 Sharp ............................... 06, 07 Sony ...................................... 08 Toshiba .................................. 09 Sanyo .................................... 10 Fisher ...
Tape Operation Search System For each recording, an invisible index mark is placed on the tape. A program index and information are also included for timer recordings. These marks are used to access or scan recordings. Program End Search Index Search 1 Press SEARCH* to display SEARCH in Stop or Play mode, and then press NUMBER keys to select recording number.
Auto Operation Functions Auto Play Insert a tape -->Power comes on, -->Play starts if no record tab (see p. 6). REW/SLOWPLAY FF/SLOW+ STOP NUMBER keys SEARCH CM/ZERO Auto Rewind Play Manual Record Fast Forward -->Tape end -->Rewind Play Auto Eject (Repeat Play must be off) Play -->Tape end -->Rewind -->Tape ejects if no record tab • If Timer Program is set, “Play Auto Eject” will operate with or without a record tab. VCR Operation ducts@panasonic.
Tape Operation (continued) Repeat Play Set to playback a recording over and over. 1 2 Press ACTION* to display MENU. MENU SET UP DVD SET UP VCR SET CLOCK SET UP CHANNEL IDIOMA/LANGUE : ENGLISH VCR’S OUTPUT CH:3 Press to select “SET UP VCR,” and press SET. SELECT : SET : SET EXIT : ACTION 3 SET UP VCR REPEAT PLAY REMOTE WARN I NG AUTO SHUT-OFF SELECT : END : ACT I ON : OFF : ON : ON Press to select “REPEAT PLAY,” and press SET to set “ON” or “OFF.
*Important: If a remote control button does not work when pressed, press the VCR button on the remote and try the button again. Weak Signal Display Feature When “ON,” picture is displayed regardless of signal strength. 1 2 ACTION SELECT SET Press ACTION to display MENU.
Special VCR Features (continued) Remote Warning Feature If Multi-brand feature is used (p. 32), and this feature is set to on, a warning appears whenever an invalid key is pressed in TV, DSS or CABLE mode. 1 2 *Important: If a remote control button does not work when pressed, press the VCR button on the remote and try the button again. Press ACTION* to display MENU.
Connection VCR/ Camcorder (Hi-Fi) OUT OUT VIDEO AUDIO TV DVD/VCR DECK IN 1 VIDEO L R Front of DECK VIDEO IN 2 IN FROM ANT. L AUDIO1 R VHF/UHF OUT TO TV VHF/ UHF L-AUDIO IN2-R (Audio/Video In Terminals on the front of DECK are available) 1 Connect VIDEO OUT terminal on Playing VCR to VIDEO IN terminal on DECK. To monitor the dubbing, also connect TV as shown. 2 Connect “L” and “R” AUDIO OUT terminals on Playing VCR to “L” and “R” AUDIO IN terminals on DECK.
Disc Operation Subtitle Language (DVD only) You can select a different subtitle language (if offered) than the one set at the Settings for DVD Operation. (See p. 49.) 1 Press SUB TITLE* in Play mode to display the subtitle selection on-screen. • Display disappears after 5 seconds. • When no subtitles are offered, “-” will be displayed instead of the language number. 2 Press to select a language. Press (or ) to set. Press to select “ON” or “OFF.
When appears on the screen while Multiple Angle Viewing (DVD only) a button is being operated, it means that the corresponding operation is DVDs may contain scenes shot from multiple camera angles allowing the same scene to be viewed at different angles. prohibited by DECK or the disc. You can view these angles, if available, using the ANGLE button. 1 Press ANGLE in Play mode to display the angle selection on-screen. ANGLE ANGLE :: 11 • Display disappears after 5 seconds.
Disc Operation (continued) Title Menu (DVD only) Some DVDs have more than one title, e.g. movies. If the disc offers a title menu, you can select the desired title number. (Operation may vary according to the disc.) 1 T I TLE MENU Dogs Cas t l es Love r s B i r ds 2 T I TLE MENU Dogs Cas t l es Love r s B i r ds B i rds of the world Press TITLE* in Play mode to display the title screen. • Pressing TITLE again resumes play from the scene when TITLE was first pressed.
Program Play (Video CD/CD) Ready Checklist DECK is in DVD mode, press DVD. Video CD or CD is inserted. You can program specific tracks and order of play. 1 2 Press ACTION to display MENU.
Disc Operation (continued) Random Play (Video CD/CD) Tracks are played in a random order. 1 2 Press ACTION* to display MENU.
When DISPLAY is pressed, On-Screen Displays show disc information (title/chapter/track number, elapsed playing time) and DECK information (Repeat Play, Play mode). 1 Ready Checklist DECK is in DVD mode, press DVD. Press DISPLAY in Play or Stop mode to display “On-Screen Displays.” • Each press of DISPLAY changes on-screen display as follows. (Refer to p. 46 or 47.) Selected disc information Selected DECK information Normal Screen Note DISPLAY button does not function while DVD TITLE MENU is displayed.
DVD Operation using On-Screen Displays (continued) Detailed Descriptions of each On-Screen Display Disc information screen (for DVD) 1. TITLE No. • Change the No. by pressing and press SET. * or NUMBER keys, 1 2 T I TLE : 1 CHAPTER : 12 DVD 1 : 12 : 55 3 4 2. Chapter No. • Change the No. by pressing and press SET. or NUMBER keys, SELECT : SET : SET NEXT : DISPLAY 3. Disc currently being played 4. Elapsed playing time The screen may be changed by selecting the elapsed time.
*Important: If a remote control button does not work when pressed, press the DVD button on the remote and try the button again. continued) DECK information screen • Change the desired mode during play by pressing , and press SET. a. Repeat Play DVD CHAPTER REPEAT Video CD/CD TRACK REPEAT TITLE REPEAT DISC REPEAT REPEAT OFF REPEAT OFF a PLAY CHAPTER REPEAT SELECT : SET : SET END : DISPLAY b. Play mode [Video CD/ CD only] (See p. 43 or 44.
DVD Lock Feature *Important: If a remote control button does not work when pressed, press the DVD button on the remote and try the button again. You can prevent playback of DVDs in a specific rating level which may be unsuitable for children. • Some DVDs are encoded with a rating level. If the disc rating is higher (stricter) than the one you preset, playback will be prohibited. DVD Lock (DVD only) A 4-digit code must be entered to view a blocked program or change rating settings.
1 2 Press ACTION in Stop mode to display MENU. MENU SET UP DVD SET UP VCR SET CLOCK IDIOMA/LANGUE : ENGLISH VCR’S OUTPUT CH:3 SELECT : SET:SET EXIT : ACTION 3 DVD MAIN MENU DI SC LANGUAGES AUDIO OUTPUT ST I L L MODE : AUTO TV MODE : Pan&Scan 4 : 3 PARENTAL LOCK :LEVEL 8 SELECT SET END Press to select “SET UP DVD,” and press SET to display screen. Once initial settings are done, they remain in memory (even after power off) until changed.
Settings for DVD Operation (continued) Audio Output Select the digital output to be output from the optical digital audio output connector of DECK. 1 2 Do steps 1 and 2 on p. 49.
Still Mode Set to reduce jitter in a displayed still picture or a motion picture. 1 2 Do steps 1 and 2 on p. 49. DVD MAIN MENU DISC LANGUAGES AUDIO OUTPUT ST I L L MODE : AUTO TV MODE : Pan&Scan 4 : 3 PARENTAL LOCK :LEVEL 8 SELECT SET END : : SET : ACTION Press to select “STILL MODE,” and press SET repeatedly for mode. (See below.) AUTO: “FIELD” (Field still) or “FRAME” (Frame still) is automatically selected during the Still mode. (Factory preset) FIELD: “FIELD” (Field still) is always selected.
Language Code List Enter the appropriate code number for the initial settings “AUDIO”, “SUBTITLE” and/or “MENUS” (see p. 49).
These displays will alert you to a missed operation or provide further instructions. Caution Page NO CH FOUND PLEASE CHECK ANTENNA CABLE CONNECTION THEN PRESS CH UP KEY AGAIN If no active channels are found for CHANNEL MEMORY... 12 16 PLEASE SET CLOCK BY PRESSING ACTION KEY If you attempt to set or review a Timer Recording and the Clock is not set...
Before Requesting Service Check the following points if you are having trouble with your DECK. Power Correction No power… • Completely insert Power Plug into an AC outlet. • Set POWER button to on. • Make sure power source is active. Power turns itself off... • Auto power-off (shutoff) occurs after about 5 min. in DVD mode with no operation, or if there is no broadcast signal in TV or Playback mode. Turn the power back on. (pp. 23, 37) Recording & Playback Correction TV program cannot be recorded...
DVD/ Video CD/ CD Correction Play fails to start even when PLAY is pressed... • This DECK cannot play discs other than DVDs, Video CDs and CDs. • The disc may be dirty and require cleaning. Play starts but then stops immediately... • Be sure disc is installed with label side up. Picture is distorted during rapid advance or rapid reverse... • The picture will be somewhat distorted at times: this is normal. No Forward/Reverse Scene Search play...
Service Center List For Product Information, Operating Assistance, Literature Request, Dealer Locations, and all Customer Service inquiries please contact: 1-800-211-PANA (7262), Monday-Friday 9am-9pm Saturday-Sunday 9am-7pm, EST. or send e-mail to : consumerproducts@panasonic.com Web Site: http://www.panasonic.com You can purchase parts, accessories or locate your nearest servicenter by visiting our Web Site.
Panasonic Consumer Electronics Company, Division of Matsushita Electric Corporation of America, One Panasonic Way Secaucus, New Jersey 07094 Panasonic Sales Company, Division of Matsushita Electric of Puerto Rico, Inc. AVE. 65 de Infantería, Km. 9.
Spanish Quick Use Guide/ Guía para rápida consulta Como realizarellaidioma, Configuración Para ajustar canal yInicial 1 Encienda el TV y ajústelo al canal 3 o Vídeo . Al encender el VCR con el control remoto. Al encender el VCR por primera vez, en la pantalla aparecerá SELECT LANGUAGE. 2 SELECT LANGUAGE PRESS CH : ENGL I SH OPR I M I R CH : ESPAÑOL APP. VCR/ TV : FRANÇA I S Presione CH para seleccionar Inglés. Presione CH para seleccionar Español. Presione VCR/TV para seleccionar Francés.
1 Inserte un cassette. • La alimentación del DECK se activa. En la Pantalla de Visualización Multi Función se ilumina “VCR”. 2 Presione PLAY para reproducir el cassette. • Si el cassette no tiene lengüeta de prevención de grabación (página 6), se inicia la reproducción automáticamente. PROG/VCR+ 1 Presione para visualizar PROGRAM.
Spanish Quick Use Guide/ Guía para rápida consulta Operaciones básicas del DVD 1 2 3 Presione POWER en el control remoto o el aparato. Presione DVD para seleccionar el modo DVD. POWER 1) Presione OPEN/CLOSE. 2) Ponga un disco en la bandeja de disco. • Sujete el disco sin tocar ninguna de sus superficies, póngalo con el lado donde esté impreso el título PLAY hacia arriba, alinéelo con las guías y póngalo en su posición apropiada.
Cuando se presiona DISPLAY, la visualización en pantalla muestra la información del disco (título/ capítulo/ número de lista, tiempo transcurrido de reproducción, audio/ idioma del subtítulo, y ángulo) e información (repetir la reproducción, modo reproducción, Karaoke vocal encendido/ apagado, etc.). Presione DISPLAY en el modo reproducción o 1 parada para visualizar Visualizaciones en pantalla. • Cada vez que se presione DISPLAY , la visualización en pantalla cambia como se muestra a continuación.
Spanish Quick Use Guide/ Guía para rápida consulta Fijaciones iniciales 1 2 Selección de IDIOMAS DEL DISCO [DVD solamente] Presione ACTION en el modo de parada para visualizar MENU. Seleccione “AUDIO” (Fijación de fábrica : inglés) Inglés/ Español/ Francés : Original : Se seleccionará el idioma original de cada disco. OTRO **** : Se puede seleccionar el otro idioma. Presione para seleccionar “PREPARA DVD”. Presione SET. 3 Presione para seleccionar el artículo deseado. Presione SET.
1 Algunos discos DVD tienen escenas que han sido filmadas simultáneamente desde un número de ángulos diferentes. Con estos discos, la misma escena podrá verse desde cada uno de estos ángulos diferentes utilizando el botón ANGLE. 1 Presione ANGLE durante la reproducción para visualizar la pantalla de ángulo. ANGULO : 1 ELEGIR : 2 2 FIJAR : SET Utilización de un menú de títulos [DVD solamente] Algunos discos con películas, por ejemplo, vienen con dos o más títulos.
Index DECK & VCR A ACTION ............................................................. 18 ADD/DELETE (Add or Delete a Channel) ........ 19 Audio Mode ....................................................... 31 Auto Shut-Off .................................................... 37 Auto VCR Plus+ System Channel Setup ... 26, 27 B Batteries .............................................................. 4 C Channel (“SET UP CHANNEL”) ........................ 18 Clock (“SET CLOCK”) ...............................