Manual

Using the built-in Flash
This camera includes a built-in Flash which
can be used to capture images in dimly lit
conditions.
LED2,4
Lamp
3
1
Note :
• The LED Lamp on the flash unit lights
when flash is charged and ready.
• The effective range of the flash is roughly
7.8 inches (20 cm) to 9.8 feet (3 m).
If you are using the flash in very bright
areas, the image background may
become dark.
• Never handle the flash unit if your hands
are wet. This may result in electric shock
or damage to the flash.
• Do not use the flash close to a person's
face as it may be harmful to the eyes.
Especially when capturing images of
infants or small children, keep at least
3.3 feet (1 m) away.
• When the recording mode is set to []
(Motion Image Rec) or _ (Burst Rec),
the flash mode will go to _) (OFF).
• Do not cover the FLASH Emitter and Light
Sensor with your finger or other object.
Set POWER to REC or MANUAL
REC.
• The LED Lamp lights up.
Press MENU to dLsplay REC MENU
MANUAL REC menu.
<RECMode> <MANUALRECM_
<REC MENU> _ <MANUAL RGC 1/3,
CARD SLOT NO. 1 I CARO SLOT NO
FLASH AUTO FLASH J_U"
SELF ¥1M_R OFF SELF TIMER OFi
OTHERS IRIS
EXIT :M_NU
Press • or Vto select FLASH and
press ,or I_ to select one of the fou
settings shown below.
t .REC MENU>
REC MOOE N
CARD SLOT NO, 1
SELF_MER OFF
Ont[RS
SEL I_-T SET l_
EXIT 1 MENU
AUTO : The flash automatically lights
depending on lighting condition:
(_) : This setting reduces the red
reflections in the eye when the
flash lights. The flash will light
twice, once before capturing an
then once during capturing.
(The flash will light whenever y_
capture an image.)
: The flash will light whenever yc
capture an image.
(_ : The flash will not light even wh_
you capture an image.
Press MENU to exit.
• Selected mode willappear on the
LCD Viewfinder (see page 11).