Operating Instructions Model No. PV-D4733S Initial Setup (Connection) DVD/VCR DECK Basic Operation VCR Operation MULTI FORMAT PLAYBACK As an ENERGY S Partner, Matsushita Electric Corporation of America has determined that this product or product model meets the ENERGY STAR ® guidelines for energy efficiency. Please read these instructions carefully before attempting to connect, operate or adjust this product. Please save this manual. Spanish Quick Use Guide is included.
Important Safeguards and Precautions FOR YOUR SAFETY, READ AND RETAIN ALL SAFETY AND OPERATING INSTRUCTIONS. HEED ALL WARNINGS IN THE MANUAL AND ON THE UNIT INSTALLATION 1 POWER SOURCE CAUTION Operate only from a power source indicated on the unit or in this manual. If necessary, have your Electric Utility Service Company or Video Products Dealer verify the power source in your home.
Safety Precautions/Mesures de sécurité WARNING: To prevent fire or shock hazard, do not expose this equipment to rain or moisture. CAUTION: To prevent electric shock, match wide blade of plug to wide slot, fully insert. Avertissement: Afin de prévenir tout risque d’incendie ou de chocs électriques, ne pas exposer cet appareil à la pluie ou à une humidité excessive.
Before Using Disc formats supported by this DECK Congratulations on your purchase of one of the most sophisticated and reliable products on the market today. Used properly, it will bring you years of enjoyment. Please fill in the information below. The serial number is on the tag located on the back of your DECK. • Date of Purchase • Dealer Purchased From • Dealer Address • Dealer Phone No. PV-D4733S • Model No. • Serial No.
Table of Contents DVD / VCR Important Safeguards and Precautions ............................ 2, 3 Before Using ............................................................................ 4 DECK & Cassette Information ........................................... 6 , 7 Location of Controls ....................................................... 8 ~ 10 Displays (On Screen Displays and Multi Function Display) .................... 11 Connections ..................................................................
DECK & Cassette Information Head Cleaning Prevent Accidental Tape Erasure Playing older or damaged tapes may eventually cause video heads to become clogged. Video Head Clog Sensor During playback, this screen appears if clogging is detected. To remove screen, press PLAY on the remote or DECK. Break off the tab to prevent recording.
Specifications Input/Output Terminal: Input Terminal: Output Terminal: Operating Temperature: Operating Humidity: Weight: Dimensions: 120 V AC, 60 Hz Power On: Approx. 32 watts, Power Off: Approx.
Location of Controls Bold: VCR Function Italic: DVD Function Bold Italic: VCR and DVD Functions Normal: Others Remote Control EJECT / OPEN / CLOSE INPUT p. 35 pp. 20, 22 TV mode POWER p. 28 CHANNEL / TRACKING / V-LOCK NUMBER keys pp. 6, 21 VOLUME + / - p. 28 ACTION ADD/DELETE / CLEAR pp. 18 , 47 pp. 19, 39, 46 SET MENU p. 38 VCR mode SELECT p. 28 STOP DVD mode pp. 20, 22 p. 28 FAST FORWARD / SEARCH / SLOW+ PLAY pp. 20, 22 pp. 20, 23 SKIP SKIP REWIND / SEARCH / SLOW- p.
FrontView View DECK Front ofof DECK STOP/EJECT p. 20 FAST FORWARD/SEARCH p. 20 PLAY Over 2 inches p. 20 Initial Setup (Connection) Bold: VCR Function Italic: DVD Function Bold Italic: VCR and DVD Functions Normal: Others If the disc cannot be removed... First, unplug DECK. Then, prepare a rigid wire (e.g. an extended paper clip) and, applying moderate force, insert it straight into the hole at the base of the tray. The tray will eject a little. Now, pull the tray all the way out and remove the disc.
Location of Controls (continued) Bold: VCR Function Italic: DVD Function Bold Italic: VCR and DVD Functions Rear View of DECK AC Power Plug VHF/UHF Antenna Output Terminal p.12 • While plugged into an AC outlet, this DECK consumes 4 W of electrical power in off mode. Component Video Output Connector (Y, PB, PR) (DVD Only) p. 13 VHF/UHF Antenna Input Terminal p. 12 Video Output Connector p. 12 Video Input Connector p. 35 • Optical Digital Audio Output Connector (DVD Only) p.
Displays (On Screen & Multi Function) On Screen Displays (VCR) CH 0 8 When a function button is pressed, e.g. PLAY, or you change channels, a 5-second display appears. Blank Tape/ No Video Signal Indications Whenever a blank section of a tape comes up in Play mode, or when the selected channel has no broadcast signal with Weak Signal Display Feature (p. 33) set to OFF, the TV screen will turn solid blue.
Connections Basic Connections • If your TV has AUDIO and VIDEO IN terminals, connect them to DECK for higher quality picture and sound. • You can enjoy stereo sound even if your TV is not stereo by connecting a stereo amplifier to DECK. • Connect DECK and TV with an RF Coaxial Cable a (supplied) or an AV Cable b (not supplied) as shown in the figure below.
Other Connections You Can IN 1 OUT IN FROM ANT. IN Cable Box VHF/UHF OUT TO TV IN OUT VHF/ UHF R L ANT or CATV OUT Cable Box IN IN 1 IN FROM ANT. OUT VHF/UHF OUT TO TV 2-Way Splitter Cable Box OUT 1 OUT 2 IN OUT A/B Switch IN 1 IN 2 • record scrambled channels. OUT AUDIO VIDEO ■ Connect With Two Cable Boxes DVD/VCR DECK • view any (including scrambled) channel.
Connections (continued) Audio Connections Ready Checklist Turn down the volume, then turn DECK, as well as other equipment to be connected, off before proceeding with connection. Do not block ventilation holes of any of the equipment and arrange them so that air can circulate freely. Read through the instructions before connecting other equipment. Ensure that you observe the color coding when connecting audio and video cables.
Initial Setup (Connection) ■ Connecting Amplifier (5.1 ch Surround system) [Digital connection] DECK Dolby Digital Decoder Amplifier Speaker or DECK DTS (digital theater systems) Decoder Amplifier Speaker When DVDs recorded in Dolby Digital or DTS are played, Dolby Digital bitstream or DTS bitstream is output from the DECK OPTICAL digital audio output connector. When DECK is connected to a Dolby Digital decoder or DTS decoder, you can enjoy theater-quality audio in your home.
Initial Setup for Basic Connections (Ready to Play) Before doing Initial Setup 1 Turn TV on. 2 See connections a RF Coaxial Cable Connection and b AV Cable Connection on page 12. Set TV to channel 3. Set TV to VIDEO. 3 [DECK ➛ TV] • Go to “Setup (Ready to Play).” (See below.) [Cable Box ➛ DECK ➛ TV], [DSS ➛ DECK ➛ TV] • Turn on Cable Box and set it to your Public Broadcasting Station (PBS) channel in your time zone.
dy to Play) *Important: If a remote control button does not work when pressed, press the VCR button on the remote and try the button again. EJECT Settings are made automatically. When setup is done, this screen appears. 6 / 8/ 2003 SUN 2 : 20PM DST : ON SETT I NG : CH 10 AUTO CLOCK SET COMPLETED If “AUTO CLOCK SET IS INCOMPLETE” appears, manually set clock. See below.
Reset Language, Channels, Clock, 1 Press ACTION* to display MENU. MENU SET UP VCR SET CLOCK SET UP CHANNEL IDIOMA/LANGUE : ENGLISH VCR’S OUTPUT CH:3 VCR’s • PROGRAM functions are not available when using COMPONENT Video Output and S-VIDEO OUT. Please set TV to either RF INPUT or VIDEO INPUT, and then press PROGRAM. SELECT : SET:SET EXIT : ACTION 2 Language Channels 1) Press to select language item. 1) Press to select “SET UP CHANNEL,” and press SET.
k, VCR’s Output Channel *Important: If a remote control button does not work when pressed, press the VCR button on the remote and try the button again. POWER CH / NUMBER keys Time Zone Adjust (Only when Auto Clock is set.) MENU SET UP VCR SET CLOCK SET UP CHANNEL IDIOMA/LANGUE : ENGLISH VCR’S OUTPUT CH:3 SELECT : SET : SET EXIT : ACTION 2) Press to select “TIME ZONE ADJUST,” 1) Press to select “VCR’S OUTPUT CH.,” and press SET.
Playback/ Record on a Tape EJECT Ready Checklist All connections are made. (pp. 12 ~ 15) TV and DECK are plugged in. TV is on and tuned to CH 3, 4, or VIDEO. Remote is in VCR mode. (Press VCR.) CH / Playback a Tape 1 2 Insert a tape. • DECK power comes on. If Auto VCR/TV (see p. 32) is set to “OFF,” press VCR/TV on the remote to be VCR mode. Press PLAY* to play a tape. • If tape has no rec. tab (p. 6), auto play begins.
*Important: If a remote control button does not work when pressed, press the VCR button on the remote and try the button again. Record on a Tape This video recorder, equipped with HQ (High Quality) system, is compatible with existing VHS equipment. Only use mark. Only tapes tapes with the tested and inspected for use in 2, 4, 6, and 8 hour machines are recommended. Insert a tape with a record tab (p. 6). 1 • DECK power comes on. If Auto VCR/TV (see p.
Basic DVD Operation Ready Checklist All connections are made. (pp. 12 ~ 15) DECK is plugged in. If DECK is connected to an audio amplifier, turn the stereo system’s power on. OPEN/ CLOSE POWER 1 2 3 Press POWER* on the remote or DECK. Press DVD to select DVD mode. • If a disc is already inserted, go to step 4. (Depending on the disc, playback may start automatically.) Press OPEN/CLOSE, and then place a disc into the disc tray.
*Important: If a remote control button does not work when pressed, press the DVD button on the remote and try the button again. ■ Forward/Reverse Scene Search Press FF/SLOW+ or REW/SLOWduring play. Press PLAY to release. • Starting forward/reverse search during play started from menu on Video CDs may recall menu. • Search speed, slow at first, increases with each additional press of the button up to 5 levels. ■ Forward/Reverse Chapter/Track Skip Press SKIP | or | SKIP during play.
Timer Recording Ready Checklist All connections are made. (pp. 12 ~ 15) TV and DECK are plugged in. Clock set correctly. (p. 18) Tape has rec.tab. (p. 6) Remote is in VCR mode. (Press VCR.) Sufficient tape remaining for recording time. 1 Press PROG* to display Program.
*Important: If a remote control button does not work when pressed, press the VCR button on the remote and try the button again. Review, Replace or Clear Program Contents: (Recording is not in progress) 1 2 Press PROG to display Program List. DT START STOP 7 9 : 00A 12 : 00A 8 10 : 00P 12 : 00P 10 8 : 00P 9 : 00P 9 : 00P 10 : 00P SU CANCEL SELECT ENTER EXIT 3 CH SPD 08 SP 02 SP 10 SP L1 LP : ADD / DLT 1-8 : : SET : PROG Press to select number and press SET to display.
MTS Broadcast/ VHS Hi-Fi Stereo System Connection Make the Audio/Video Connection as shown on pp. 12 ~ 15. • You can use TV connected to a Stereo amplifier and speakers instead of Stereo TV. Receivable Broadcast Types The following are possible audio broadcast types and onscreen displays. The signal being received is indicated with an “ ” mark while the selected audio mode is indicated with an arrow. To display the broadcast signal being received, ➛ press DISPLAY*.
*Important: If a remote control button does not work when pressed, press the VCR button on the remote and try the button again. Audio Mode for Recording 1 Press AUDIO (SAP/Hi-Fi) to display audio mode. (Display disappears after 5 seconds.) 2 STEREO SAP MONO Press AUDIO (SAP/Hi-Fi) repeatedly to select desired mode. • Refer to “Receivable Broadcast Types” on p. 26. • Arrow indicates selection. 3 Make a recording. See p. 21. VCR Operation Audio Mode for Playback 1 2 3 Start playback. See p. 20.
Multi-Brand Control Feature Multi-Brand Control Setup POWER The Remote Control can be set to control some TV functions. 1 2 Find your TV Brand Code Number on the following page. 3 Confirm code entry, TV Set up for TV control, NUMBER keys ➛ hold down TV button, ➛ enter code with NUMBER keys. • If code number is 100 or greater, ➛ e.g., press 1 - 0 - 2 for 102. ➛ press POWER to turn selected unit on or off. • See table below for controllable functions in each mode.
TV Brand Code Numbers Panasonic ....................... 01, Quasar ............................ 01, RCA ....................................... GE ......................................... Zenith .................................... Magnavox .............................. 02 02 03 03 04 05 Sylvania ................................ Sharp ............................... 06, Sony ...................................... Toshiba ................................. Sanyo ....................................
Tape Operation Search System For each recording, an invisible index mark is placed on the tape. A program index and information are also included for timer recordings. These marks are used to access or scan recordings. Program End Search Index Search 1 Press SEARCH* to display SEARCH in Stop or Play mode, and then press NUMBER keys to select recording number.
*Important: If a remote control button does not work when pressed, press the VCR button on the remote and try the button again. Auto Operation Functions Auto Play Insert a tape ➛ Power comes on, ➛ Play starts if there is no record tab (see p. 6). Auto Rewind Play Fast Forward ➛ Tape end ➛ Rewind Play Auto Eject (Repeat Play must be off) Play ➛ Tape end ➛ Rewind ➛ Tape ejects if set some programs.
Tape Operation (continued) Repeat Play VCR/TV Selector Feature Set to playback a recording over and over. 1 2 Press ACTION* to display MENU. MENU SET UP VCR SET CLOCK SET UP CHANNEL IDIOMA/LANGUE : ENGLISH VCR’S OUTPUT CH:3 Press to select “SET UP VCR,” and press SET. SELECT : SET : SET EXIT : ACTION 3 SET UP VCR REPEAT PLAY REMOTE WARN I NG AUTO SHUT-OFF AUTO VCR/TV SELECT : END : ACT I ON : : : : OFF ON OFF OFF Press to select “REPEAT PLAY,” and press SET to set “ON” or “OFF.
Special VCR Features *Important: If a remote control button does not work when pressed, press the VCR button on the remote and try the button again. Weak Signal Display Feature When “ON,” picture is displayed regardless of signal strength. ACTION 1 2 SELECT Press ACTION to display MENU.
Special VCR Features (continued) Remote Warning Feature If Multi-brand feature is used (p. 28), and this feature is set to on, a warning appears whenever an invalid key is pressed in TV mode. 1 2 INPUT Press ACTION* to display MENU. MENU SET UP VCR SET CLOCK SET UP CHANNEL IDIOMA/LANGUE : ENGLISH VCR’S OUTPUT CH:3 SELECT : SET : SET EXIT : ACTION 3 *Important: If a remote control button does not work when pressed, press the VCR button on the remote and try the button again.
Copying Your Tapes (Dubbing) Connection VCR/ Camcorder (Hi-Fi) OUT OUT VIDEO AUDIO TV DVD/VCR DECK IN 1 VIDEO IN 2 VIDEO L R Front of DECK IN FROM ANT. L AUDIO1 R VHF/ UHF VHF/UHF OUT TO TV L-AUDIO IN2-R (Audio/Video In Terminals on the front of DECK are available) 1 Connect VIDEO OUT terminal on Playing VCR to VIDEO IN terminal on DECK. To monitor the dubbing, also connect TV as shown. 2 Connect “L” and “R” AUDIO OUT terminals on Playing VCR to “L” and “R” AUDIO IN terminals on DECK.
Disc Operation Subtitle Language (DVD only) Ready Checklist You can select a different subtitle language (if offered) than the one set at the Settings for DVD Operation. (See p. 47.) Please read “Basic DVD Operation” on page 22. 1 [Subtitle language] [Audio sound track language] Press SUB TITLE* in Play mode to display the subtitle selection on-screen. • Display disappears after 5 seconds. • When no subtitles are offered, “-” will be displayed instead of the language number.
*Important: if a remote control button does not work when pressed, press the DVD button on the remote and try the button again. When appears on the screen while a button is being operated, it means that the corresponding operation is prohibited by DECK or the disc. Multiple Angle Viewing (DVD only) DVDs may contain scenes shot from multiple camera angles allowing the same scene to be viewed at different angles. You can view these angles, if available, using the ANGLE button.
Disc Operation (continued) Title Menu (DVD only) Some DVDs have more than one title, e.g. movies. If the disc offers a title menu, you can select the desired title number. (Operation may vary according to the disc.) 1 T I TLE MENU Dogs Cas t l es Love r s B i r ds Press TITLE* in Play mode to display the title screen. 2 T I TLE MENU Dogs Cas t l es Love r s B i r ds B i rds of the world Press or NUMBER keys to select a title, and press SET or PLAY to start playing.
*Important: if a remote control button does not work when pressed, press the DVD button on the remote and try the button again. Program Play (Video CD/CD only) Ready Checklist DECK is in DVD mode, press DVD. Video CD or CD is inserted. You can program specific tracks and order of play. 1 2 Press ACTION to display DVD MAIN MENU.
Disc Operation (continued) Random Play (Video CD/CD only) Ready Checklist DECK is in DVD mode, press DVD. Tracks are played in a random order. 1 2 Press ACTION* to display DVD MAIN MENU. DVD MAIN MENU DISC LANGUAGES AUDIO OUTPUT ST I L L MODE : AUTO TV MODE : 4:3 Letterbox PARENTAL LOCK :LEVEL 8 PLAY MODE SELECT SET END 3 : : SET : ACTION PLAY MODE PROGRAM PLAY RANDOM PLAY SELECT SET END : : SET : ACTION Press to select “PLAY MODE,” and press SET to display.
DVD Operation using On-Screen Displays When DISPLAY is pressed, On-Screen Displays show disc information (title/chapter/track number, elapsed playing time) and DECK information (repeat play, play mode). 1 Ready Checklist DECK is in DVD mode, press DVD. Press DISPLAY in Play or Stop mode to display “On-Screen Displays.” • Each press of DISPLAY changes the on-screen display as follows. (Refer to p. 42.
DVD Operation using On-Screen Displays (continued) Detailed Descriptions of each On-Screen Display ■ Disc information screen (for DVD) 1. TITLE No. • Select “TITLE”, and press SET.* 1 2 T I TLE : 1 CHAPTER : 12 DVD 01 : 12 : 55 3 4 or NUMBER keys, and press SET. • Change the No. by pressing 2. CHAPTER No. • Select “CHAPTER”, and press SET. or NUMBER keys, and press SET. • Change the No. by pressing SELECT : SET : SET 3. Disc currently being played 4.
MP3/JPEG Playback Operation This unit can play MP3/JPEG format CD-R or CDRW recorded for personal use on a PC, etc. Some discs may not play due to the condition of the recording. 1 2 3 Press POWER on the remote or DECK. Press OPEN/CLOSE, then place an MP3/JPEG disc into the disc tray. Press OPEN/CLOSE to close. • MP3/JPEG menu is displayed. • Playback starts automatically (except JPEG files). • CD directory is displayed. Function Status Folder area (Current folder appears green.
MP3/JPEG Playback Operation (continued) JPEG Playback You can play back JPEG images. Displayable Image Size: 32x32~7680x7680 pixels Note • Some JPEG format may not be played back. Do steps 1~3 on page 43. 1 2 Press to select an JPEG file ( ). Press SET or PLAY. Selected JPEG file is displayed. [JPEG Playback Screen] ■ Returned on the MP3/JPEG MENU ➡ Press STOP. (See p. 43) ■ Next/Previous Search ➡ Press SKIP | or | SKIP. ■ Start Slide-show ➡ Press FF/SLOW+ or REW/SLOW-.
JPEG Zoom (During JPEG Playback.) You can enlarge specific portions of a JPEG picture and select the zoom ratio using the ZOOM button on the remote during JPEG Playback screen. Set Zoom size. Press ZOOM repeatedly to change display as follows. ➡ Press STOP to return to the MP3/JPEG MENU. • You can enlarge the center portion of the image to one of 2 magnifications. • Operation can be done during Rotation (below). ACTION SELECT STILL X 1.5 (ZOOM 1) 1st press STOP REW/ SLOWFF/ SLOW+ X 1.
DVD Lock Feature *Important: If a remote control button does not work when pressed, press the DVD button on the remote and try the button again. You can prevent playback of DVDs of a specific rating level which may be unsuitable for children. • Some DVDs are encoded with a rating level. If the disc rating is higher (stricter) than the one you preset, playback will be prohibited. Ready Checklist DECK is in DVD mode, press DVD.
Settings for DVD Operation 1 2 Press ACTION to display DVD MAIN MENU. DVD MAIN MENU DISC LANGUAGES AUDIO OUTPUT ST I L L MODE : AUTO TV MODE : 4:3 Letterbox PARENTAL LOCK :LEVEL 8 Press to select an item, and press SET. Once initial settings are done, they remain in memory (even after power off) until changed. This means DECK will operate under the same conditions (especially DVDs) each time. Ready Checklist DECK is in DVD mode, press DVD.
Settings for DVD Operation (continued) Audio Output Ready Checklist Select the digital output to be output from the optical digital audio output connector of DECK. 1 2 Press ACTION* to display DVD MAIN MENU.
*Important: If a remote control button does not work when pressed, press the DVD button on the remote and try the button again. Still Mode Set to reduce jitter in a displayed still picture or a motion picture. 1 2 Press ACTION to display DVD MAIN MENU. DVD MAIN MENU DISC LANGUAGES AUDIO OUTPUT ST T I L L MODE : AUTO TV MODE : 4:3 Letterbox PARENTAL LOCK :LEVEL 8 SELECT SET END : : SET : ACTION Press to select “STILL MODE,” and press SET repeatedly for mode. (See below.
Language Code List Enter the appropriate code number for the initial settings “AUDIO”, “SUBTITLE” and/or “MENUS” (see p. 47).
Warning and Instruction Displays These displays will alert you to a missed operation or provide further instructions. OSD Caution Page PLEASE SET CLOCK BY PRESSING ACTION KEY If you attempt to set or review a Timer Recording and the Clock is not set... 24 PLEASE PREPARE FOR TIMER REC If DECK is not in Stop mode or a cassette with record tab is not inserted 2 minutes before a Timer Recording is about to begin...
Before Requesting Service Check the following points if you are having trouble with your DECK. Power Correction No power… • Completely insert Power Plug into an AC outlet. • Set POWER button to on. • Make sure power source is active. Power turns itself off... • Auto power-off (shutoff) occurs after about 5 min. in DVD mode with no operation, or if there is no broadcast signal in TV or Playback mode. Turn the power back on. (pp. 23, 33) Correction Recording & Playback TV program cannot be recorded...
Check the following points if you are having trouble with your DECK. DVD/ Video CD/ CD Correction Play fails to start even when PLAY is pressed... • This DECK cannot play discs other than DVDs, Video CDs and CDs. • The disc may be dirty and require cleaning. Play starts but then stops immediately... • Be sure disc is installed with label side up. Picture is distorted during rapid advance or rapid reverse... • The picture will be somewhat distorted at times: this is normal.
Limited Warranty PANASONIC CONSUMER ELECTRONICS COMPANY, DIVISION OF MATSUSHITA ELECTRIC CORPORATION OF AMERICA One Panasonic Way Secaucus, New Jersey 07094 PANASONIC SALES COMPANY, DIVISION OF MATSUSHITA ELECTRIC OF PUERTO RICO, INC., AVE. 65 de Infantería, Km. 9.
Limited Warranty Limits And Exclusions This Limited Warranty ONLY COVERS failures due to defects in materials or workmanship, and DOES NOT COVER normal wear and tear or cosmetic damage.
Spanish Quick Use Guide/ Guía para rápida consulta CONEXIONES/CONFIGURACION (READY TO PLAY) Para ajustar el idioma, canalINICIAL y Realice la conexión de la antena o TV por cable antes de enchufar el cable de CA. EL DVD/VCR iniciará automáticamente la fijación de los canales y del reloj al enchufar el cable de CA. CONEXIONES DVD/VCR Para Ant/Cable ➛ DVD/VCR ➛ TV 1 2 Terminal IN FROM ANT. Televisor 1 Conecte el cable de la antena al terminal IN FROM ANT del DVD/VCR.
Programación fácil para la grabación con temporizador Operaciones básicas para la reproducción 1 Inserte un cassette, • La alimentación del DECK se activa. En la Pantalla de Visualización Multi Función se ilumina “VCR”. PROG 1 Presione para visualizar la pantalla de Programacion. 2 Presione PLAY para reproducir el cassette. 2 • Si el cassette no tiene la lengüeta de prevención de grabación (página 6), se inicia la reproducción automáticamente. 3 Presione STOP para detener el cassette.
Spanish Quick Use Guide/ Guía para rápida consulta Operaciones básicas del DVD POWER en el control remoto o el 1 Presione aparato. 2 Presione DVD para seleccionar el modo DVD. OPEN/CLOSE. 3 1)2) Presione Ponga un disco en la bandeja de disco. OPEN/ CLOSE POWER • Sujete el disco sin tocar ninguna de sus superficies, póngalo con el lado donde esté impreso el título hacia arriba, alinéelo con las guías y póngalo en su posición apropiada.
Funcionnamiento del DVD utilizando visualizaciones en pantalla Cuando se presiona DISPLAY, la visualización en pantalla muestra la información del disco (título / capítulo / número de lista, tiempo transcurrido de reproducción, audio / idioma del subtítulo, y ángulo) e información (repetir la reproducción, modo reproducción, Karaoke vocal encendido / apagado, etc.). DISPLAY en el modo reproducción 1 Presione o parada para visualizar las visualizaciones en pantalla.
Spanish Quick Use Guide/ Guía para rápida consulta Utilización de un menú de títulos [DVD solamente] Algunos discos con películas, vienen con dos o más títulos. Por ejemplo, si el disco tiene un menú de títulos grabados, el botón TITLE podrá utilizarse para seleccionar el título de la película. 1 2 Presione TITLE durante la reproducción. Ahora se visualiza una lista de los títulos del disco. Presione o las T I TLE MENU teclas de números para Dogs Cas t l es seleccionar el título Love r s B i r ds deseado.
Fijaciones iniciales Selección de IDIOMAS DEL DISCO [DVD solamente] 1 Presione DVD para seleccionar el modo DVD. ACTION en el modo de parada para 2 Presione visualizar MENU. para seleccionar el artículo deseado. 3 Presione Presione SET. IDIOMAS DEL DISCO Seleccione “AUDIO” Todos los idiomas ofrecidos en el disco pueden ser ajustados. Si el idioma ajustado no es ofrecido en el disco, se seleccionará el idioma original del disco.
Index DECK & VCR A ACTION button ................................. 8, 18 Accessories ............................................ 4 ADD/DELETE button (Add or Delete a Channel) .................. 8, 19 Audio Broadcast types (Stereo/SAP/Mono) ............................ 26 Audio Mode (Playback, Recording) .... 27 Auto Operation Functions .................... 31 Auto Shut-Off ........................................ 33 B Batteries .................................................
DVD S SEARCH button (Forward/Reverse Scene Search) .. 8, 23 SKIP l or l button (Forward/Reverse Chapter/Track) .. 8, 23 Slide-show ........................................... 44 SLOW+/SLOW- button (Slow Motion Picture) ....................... 8, 23 STILL button (Still Picture or Pause) ................... 8, 23 Still Mode (For selecting “FIELD” or “FRAME”) ...... 49 STOP button ..................................... 8, 22 SUB TITLE button (For selecting Subtitle Language) .. 8, 36 S-Video Out ...............
Panasonic Consumer Electronics Company, Division of Matsushita Electric Corporation of America One Panasonic Way Secaucus, New Jersey 07094 Panasonic Sales Company (“PSC”), Division of Matsushita Electric of Puerto Rico, Inc. Ave. 65 de Infantería. Km. 9.5 San Gabriel Industrial Park, Carolina, Puerto Rico 00985 D4733S P36-60 (030610 C-lot).