Digital Video Camcorder Operating Instructions Models No. (PV-GS15 Shown) PV-GS9 PV-GS12 PV-GS14 PV-GS15 Before attempting to connect, operate or adjust this product, please read these instructions thoroughly. Spanish Quick Use Guide is included. Guía para rápida consulta en español está incluida. [For PV-GS12/PV-GS14/ PV-GS15] [For PV-GS12/PV-GS14/ PV-GS15] For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at: http://www.panasonic.
Things You Should Know Thank you for choosing Panasonic! You have purchased one of the most sophisticated and reliable products on the market today. Used properly, we’re sure it will bring you and your family years of enjoyment. Please take time to fill in the information on the right. The serial number is on the tag located on the underside of your Camcorder. Be sure to retain this manual as your convenient Camcorder information source.
Declaration of Conformity Trade Name : Panasonic Model No. : PV-GS9/PV-GS12/PV-GS14/PV-GS15 Responsibility Party : Matsushita Electric Corporation of America Address : One Panasonic Way Secaucus New Jersey 07094 Telephone Number : 1-800-211-PANA(7262) This device complies with Part 15 of the FCC Rules.
Important Safeguards 1. Read Instructions — All the safety and operating instructions should be read before the unit is operated. 2. Retain Instructions — The safety and operating instructions should be retained for future reference. 3. Heed Warnings — All warnings on the unit and in the operating instructions should be adhered to. 4. Follow Instructions — All operating and maintenance instructions should be followed. 5. Cleaning — Unplug this video unit from the wall outlet before cleaning.
15. Power Lines — An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal. 16. Overloading — Do not overload wall outlets and extension cords as this can result in a risk of fire or electric shock. 17.
Before opening the CD-ROM package (PV-GS15: Supplied, PV-GS9/PV-GS12/PV-GS14: Optional Software), please read the following. End User License Agreement (for USB Driver, WebCam Driver and DV STUDIO (Optional Software)) You (“Licensee”) are granted a license for the Software defined in this End User Software Agreement (“Agreement”) on condition that you agree to the terms and conditions of this Agreement.
This operating instruction book is designed for use with models PV-GS9, PV-GS12, PV-GS14, and PV-GS15. The PV-GS15 is the model used for illustrative purposes. Features may vary, so please read carefully.
Contents Before Use Things You Should Know ....................................2 Safety Precautions ..............................................2 Important Safeguards ..........................................4 Precautions .........................................................5 End User License Agreement..............................6 Differences between models ...............................7 Quick Guide.......................................................10 Standard Accessories.....................
Playback Mode Playing Back a Tape ..........................................35 Finding a Scene You Want to Play Back ...........35 Slow Motion Playback (Remote Control Only) ..36 Still Playback/Still Advance Playback ................36 Index Search Functions (Remote Control Only) ....................................37 Playback Zoom Function (Remote Control Only) ....................................37 Playback Digital Effect Functions ......................
Before Use Quick Guide 1 Attach the Battery to the AC Adaptor and charge it. Inserting a Card (For PV-GS12/PV-GS14/PV-GS15) 1 Place your Thumb on the [OPEN▼] 1 Knob and pull the LCD Monitor 2 out in the direction of the arrow. 2 1 • Before use, fully charge the Battery. • Since the Battery will not be charged when the DC Cable is connected to the AC Adaptor, disconnect it from the AC Adaptor. • The [POWER] Lamp and [CHARGE] Lamp light up, and charging starts.
Before Use Recording a Still Picture on Tape (PV-GS9 Only) 2 Set the Mode Dial to Tape Playback Mode. 1 Set the Mode Dial to Tape Recording Mode. (PV-GS12/ (PV-GS9) PV-GS14/ PV-GS15) 3 Press the [ ] Button to rewind the tape. 2 Press the [PHOTO SHOT] Button in the Recording Pause Mode. 4 Press the [►] Button to start playback. Recording a Still Picture on Card (Photoshot) (For PV-GS12/PV-GS14/PV-GS15) 5 Press the [ ] Button to stop playback. 1 Set the Mode Dial to Card Recording Mode.
Before Use Before Use Controls and Components Camcorder Standard Accessories Illustrated are accessories supplied with the Camcorder. 1) PV-DAC11 LSJA0288 2) 7 10 11 12 1 K2CB2CB00014 3) 3 5) LSJA0280 6) LSFC0018 RP-SD008MMK0 (PV-GS15 Only) 7) 1 2 4 LSFT0575 (PV-GS15 Only) 1) AC Adaptor, DC Cable and AC Cable (p. 15) CAUTION: This unit will operate on 110/120/220/240 V AC. An AC plug adaptor may be required for voltages other than 120 V AC.
Before Use 26 34 35 36 37 40 22 23 24 41 38 39 43 44 25 22 Lens Hood (p. 69) 23 Lens 34 Viewfinder (pp. 19, 68) 24 Microphone (built-in, stereo) (pp. 27, 29) 25 Built-in LED Light (For PV-GS12/PV-GS14/PV-GS15) (p. 26) 26 Zoom Lever [W/T] (pp. 27-28, 35) Due to limitations in LCD production technology, there may be some tiny bright or dark spots on the Viewfinder screen. However, this is not a malfunction and does not affect the recorded picture. 35 Eyepiece Corrector Knob (p.
Before Use Remote Control (PV-GS15 Only) The following buttons function in the same manner as the corresponding buttons on the Camcorder. Using the wireless Remote Control with the Camcorder, most of the Camcorder functions can be operated from a distance. 65 66 50 51 52 53 71 72 73 67 68 69 70 54 55 74 75 56 65 Photoshot Button [PHOTO SHOT] (pp. 25-26) 50 Date/Time Button [DATE/TIME] (p. 60) 51 Indication Output Button [OSD] (p. 43) 66 Title Button [TITLE] (p.
Before Use • When the button-type battery is exhausted, replace it with a new CR2025 battery. (A battery is normally expected to last about 1 year. However, it depends on operation frequency.) • Make sure to match the poles correctly when inserting the button-type battery. WARNING ●Replace Battery with Panasonic or Lixing type CR2025 only. Use of another battery may present a risk of fire or explosion. ●Battery may explode if mistreated.
Before Use • Since the Battery will not be charged when the DC Cable is connected to the AC Adaptor, disconnect it from the AC Adaptor. • The [POWER] Lamp and [CHARGE] Lamp light up, and charging starts. • When the [CHARGE] Lamp goes off, charging is completed. • When the battery is completely discharged, the [CHARGE] Lamp blinks at first, but the battery is charged normally. When the temperature of the battery is too high or low, the [CHARGE] Lamp blinks and the charging time becomes longer than usual.
Before Use Re-attaching the Lens Cap To protect the Lens surface, attach the Lens Cap. • The Lens Cap and Lens Cap Cord come preattached to the Grip Belt. 1 Pass one end of the Lens Cap Cord through the attached eye on the Lens Cap. Then pass the Lens Cap through the loop made by itself and pull tight. • Pull it out more than 1 inch (2 cm) 1 from the Shoulder Strap Length Adjuster so that it cannot slip off.
Before Use Using a Memory Card (For PV-GS12/ PV-GS14/PV-GS15) A Card can be used to record still pictures. • Use a genuine SD Memory Card or MultiMediaCard manufactured by Panasonic only. Before inserting or removing a Card, be sure to turn off the Camcorder. Turning on the Camcorder Turn on the power first and then select modes. How to Turn on the Power 1 Set the [OFF/ON] Switch 44 to [ON] while pressing the button 1 . • The [POWER] Lamp 41 lights up.
Before Use Using the Viewfinder/LCD Monitor Using the Viewfinder Before using the Viewfinder, adjust the field of view so that the displays inside the Viewfinder become clear and easy to read. 1 Pull the Viewfinder. 1 180° 2 90° Closing the LCD Monitor Push the LCD Monitor until it is securely locked. • Make sure the Card Slot Cover is closed. 2 Adjust by turning the Eyepiece Corrector Knob 35 .
Before Use • The Menu corresponding to the Mode selected by using the Mode Dial 40 is displayed. • After the above File Selection Procedure, carry out the various Menu Operations. (The above procedure will not be repeated in the following instructions.) 40 (PV-GS12/ (PV-GS9) PV-GS14/ PV-GS15) List of Menus 2 Press the [ / ] Button 13 16 to select a desired Sub-Menu. • Press the [ item. / ] Button to display the highlighted 3 Press the [ ] Button 14 to display the selected Sub-Menu.
Before Use [SCENE INDEX] Scene Index Mode (p. 37) [WIND CUT] Wind Noise Reduction (p. 29) [TAPE PLAYBACK MENU] Tape Playback Menu (PV-GS12/PV-GS14/PV-GS15) (PV-GS9) [ZOOM MIC] Zoom Microphone (p. 27) [CINEMA] Cinema-like Format Recording (p. 29) 5) [DISPLAY] Display Setup Sub-Menu [DISPLAY] Display Mode (p. 60) [DATE/TIME] Date and Time Indication (p. 60) [C.DISPLAY] Counter Display Mode (p. 60) 1) [PLAYBACK] Playback Functions Sub-Menu [SEARCH] Index Search Mode (p.
Before Use 7) [INITIAL] Initial Setup Sub-Menu [BLANK SEARCH] 6) [INITIAL] Initial Setup Sub-Menu [AV JACK] Blank Search (p. 24) AV Jack (pp. 13, 65) [AV JACK] [REMOTE] AV Jack (pp. 13, 65) Remote Control Mode (p. 15) [REMOTE] [BEEP SOUND] Remote Control Mode (p. 15) Beep Sound (p. 61) [BEEP SOUND] [CLOCK SET] Beep Sound (p. 61) Date and Time Setting (p. 23) [INITIAL SET] Initial Setting Mode (p.
Before Use 5) [LCD/EVF] LCD/EVF Setup Sub-Menu [LCD/EVF SET] LCD and Viewfinder Adjustment (p. 19) [EVF ON/AUTO] Internal Lithium Battery Recharge The internal lithium battery sustains the operation of the clock. When the [ ] Indication flashes, the internal lithium battery is near exhaustion. Using the Viewfinder (p. 19) 6) [INITIAL] Initial Setup Sub-Menu [AV JACK] AV Jack (pp. 13, 65) [REMOTE] Remote Control Mode (p.
Recording Mode Recording Mode About Recording When recording pictures on a tape, set the Mode Dial 40 to Tape Recording Mode [ ]. When recording still pictures on a card, set the Mode Dial 40 to Card Recording Mode [ ] (For PV-GS12/PV-GS14/PV-GS15). When recording with the [AUTO/MANUAL/FOCUS] Switch 18 set to [AUTO], the Camcorder automatically adjusts the focus and white balance. In some cases, they cannot be adjusted automatically and need to be adjusted manually. (pp.
Recording Mode To Cancel Blank Search Before Completion Press the [ ] Button. Digital Still Picture When the [STILL] Button 13 is pressed, images become still pictures. When the button is pressed again, the Digital Still Picture Mode is canceled. 13 Recording a Still Picture on a Card (Photoshot) (For PV-GS12/PV-GS14/ PV-GS15 ) Still pictures can be recorded on the Memory Card from the Camcorder. 1 Set the Mode Dial 40 to Card Recording Mode.
Recording Mode RapidFire Consecutive Photoshot The still pictures can be recorded on a Card at regular intervals. 1 Set [CARD RECORDING MENU] >> [CARD] >> [BURST MODE] >> [ON]. Recording with the Built-in LED Video Light (For PV-GS12/PV-GS14/PV-GS15) To brighten the natural colors in a scene. Gain Up mode works with the Built-in Video Light to enhance the light’s brightness. 1 Press the [LIGHT] Button 11 . 1 19 13 14 15 16 17 11 • The [ ] Indication appears.
Recording Mode 3 Set the [OFF/ON] Switch 44 to [ON]. • The Camcorder will be ready for recording in approximately 1.3 seconds. • Zoom Magnification Indication is displayed for a few seconds. To Cancel the Quick Start Keep the [QUICK START] Button pressed for approximately 2 seconds and make sure the Quick Start Recording Lamp is not lit. • For other notes concerning this item, see page 62.
Recording Mode 2 Push the [W/T] Lever 26 towards [W] or towards [T] to zoom in or out. Fade In/Out Functions Fade In Fade In brings out images and sounds gradually from a black screen at the beginning of a scene. 26 To Cancel the Digital Zoom Function Set [TAPE RECORDING MENU] >> [CAMERA] >> [D.ZOOM] >> [OFF]. • For other notes concerning this item, see page 62. 1 Keep pressing the [FADE] Button 16 during the Recording Pause Mode.
Recording Mode 2 When the image is completely gone, press the Recording Start/Stop Button 43 to stop recording. Soft-Skin Mode This enables you to record skin colors in a softer tone. In order to get the best result, avoid background colors similar to the skin color of the subject. Otherwise, this may result in a softer background lacking in detail. 1 Press the [SOFT SKIN] Button 9 . 43 9 3 Release the [FADE] Button 16 . • The still picture cannot fade in or fade out.
Recording Mode • Black bars appear at the top and bottom of the screen. 1) [ ] Sports Mode • For recording scenes involving quick movements, such as sports scenes. 2) [ ] Portrait Mode • Use when you want to make people (subjects) stand out from the background. To Cancel the Cinema Function Set [TAPE RECORDING MENU] >> [RECORDING] >> [CINEMA] >> [OFF]. • For other notes concerning this item, see page 63.
Recording Mode 1) Automatic White Balance Adjustment [AWB] 2) The white balance setting that was previously ] set manually [ 3) Outdoor Mode [ ] 4) Indoor Mode (recording under incandescent ] lamp) [ To Resume Automatic Adjustment Press the [ ] Button 14 or [ ] Button 17 until the [AWB] Indication appears. Or, set the [AUTO/MANUAL/FOCUS] Switch to [AUTO]. Adjusting White Balance Manually White Balance Adjustment recognizes the color of light and adjusts so that white will appear pure white.
Recording Mode Manual Shutter Speed Adjustment Useful for recording fast-moving subjects. 1 Set the [AUTO/MANUAL/FOCUS] Switch 18 to [MANUAL]. 18 • The [MNL] Indication appears. 2 Press the [ENTER] Button 15 until the Shutter Speed Indication appears. 3 Press the [ ] Button 14 or [ 17 to adjust the iris. ] Button Range of Iris Adjustment CLOSE (Closed), F16, ..., F2.0, OP (Opened) + 0dB, ..., OP + 18dB When a value closer to [CLOSE] is selected, the image becomes darker.
Recording Mode Digital Effect Functions This Camcorder is equipped with Digital Effect Functions that add special effects to the scene. Digital Effects 1 [EFFECT1] To Select a Desired Digital Effect Set [TAPE RECORDING MENU] >> [DIGITAL] >> [EFFECT1] or [EFFECT2] >> a desired Digital Effect. 1) MULTI 2) P-IN-P 3) WIPE To Cancel the Digital Effect Set [TAPE RECORDING MENU] >> [DIGITAL] >> [EFFECT1] or [EFFECT2] >> [OFF].
Recording Mode Deleting All the Captured Multi-Pictures While 9 multi-pictures are displayed, press the [MULTI] Button. Wipe Mode and Mix Mode Wipe Mode: • If [MANUAL] has been selected, press the [MULTI] Button after 9 pictures are displayed. Like drawing a curtain, the still picture of the last recorded scene gradually changes to the moving image of a new scene. To Display the Multi-Pictures Again Press the [MULTI] Button for 1 second or longer.
Playback Mode Playback Mode Playing Back a Tape The recorded scene can be played back immediately after the recording. 1 Set the [OFF/ON] Switch 44 to [ON]. • The [POWER] Lamp 41 lights up. Adjusting the Sound Volume To adjust the volume, push the [W/T] Lever 26 to display the [VOLUME] Indication. Push the [W/T] Lever towards [T] to increase the volume or push the [W/T] Lever towards [W] to decrease the volume. The [VOLUME] indication disappears immediately after adjustment is made.
Playback Mode Variable Speed Search Function The speed of Cue Playback or Review Playback can be varied. 1 During playback, press the [►] Button 15 . • The [1X ] Indication appears. 15 Scenes recorded in the SP Mode are played back at approximately 1/5th of the normal speed. Scenes recorded in the LP Mode are played back at approximately 1/3rd of the normal speed. To Resume Normal Playback Press the [►] Button 72 .
Playback Mode Index Search Functions (Remote Control Only) • This feature is only available with Remote Control. However it is not supplied for models PV-GS9/ PV-GS12/PV-GS14. If you would like to order, the parts number is LSSQ0411 as a replacement parts. Please refer to page 74. To facilitate searching for desired scenes, this Camcorder automatically records index signals during recording, as explained in the following.
Playback Mode To Change the Zoom Magnification 2 Change the magnification by pressing the [W] Button or [T] Button 62 on the Remote Control. 62 Wipe Mode and Mix Mode (Remote Control Only) • This feature is only available with Remote Control. However it is not supplied for models PV-GS9/ PV-GS12/PV-GS14. If you would like to order, the parts number is LSSQ0411 as a replacement parts. Please refer to page 74. 1 Press the [►] Button 72 .
Playback Mode Slide Show (For PV-GS12/PV-GS14/ PV-GS15) 1 The recorded still pictures in the Card can be played back like a Slide Show. 2 3 1 2 3 Folder File Number Picture Size (p. 60) File Number 1 Set the Mode Dial 40 to Picture Playback Mode. 40 To Select a Desired File and Playing Back 1 Set the Mode Dial 40 to Picture Playback Mode. 2 Press the [►] Button 15 . 40 15 • The [SLIDE ] Indication is displayed. 2 Press the [MULTI] Button 20 .
Playback Mode Creating a Title (For PV-GS12/ PV-GS14/PV-GS15) 1 2 You can create a title and record on a Card. 1 Recording Mode: Set the Mode Dial 40 to Tape Recording Mode or Card Recording Mode. Set the Lens to the image you want to use for creating a title.
Playback Mode 4 Press the [ / / / ] 13 14 16 17 Button to select a desired title. 4 Press the [ ] Button 14 or [ ] Button 17 to select the number of pictures to be printed, and press the [ENTER] Button 15 . • [ ] Indication 2 is displayed in the picture set. (p. 60) 13 14 16 17 • The selected title is marked with a frame. 5 Press the [MULTI] Button 20 . • The selected title is displayed. • Recording and Photoshot Recording can be made with pictures that have titles.
Playback Mode Deleting the Files Recorded on a Card (For PV-GS12/PV-GS14/PV-GS15) Formatting a Card (For PV-GS12/ PV-GS14/PV-GS15) Using the Camcorder, you can delete the files recorded on a Card. After the file is deleted, it cannot be restored. If a Card becomes unreadable by the Camcorder, format it for reuse. Formatting erases all the data recorded on a Card. To Select and Delete Files or Titles 1 Set [PICTURE PLAYBACK MENU] >> [EDITING] >> [CARD FORMAT] >> [YES].
Playback Mode Playing Back on Your TV By connecting your Camcorder with your TV, the recorded scenes can be viewed on your TV screen. • Before connecting them, turn off the power of both the Camcorder and TV. 1 Connect the [AV OUT] Jack of the Camcorder and the Video and Audio Input Jacks of the TV. [VIDEO IN] [S-VIDEO IN] [AUDIO IN] 2 1 (For PV-GS14/ PV-GS15) • Connect to the TV with the AV Cable 1 .
Editing Mode Editing Mode Recording from a Tape onto a Card (For PV-GS12/PV-GS14/PV-GS15) • When recording to tape, select the tape position before recording. The picture will be recorded to the tape position when the [PHOTO SHOT] Button is pressed at Step 3. • Photoshot index signals are automatically recorded. Still pictures can be recorded on the Memory Card from scenes that have already been recorded on a cassette. • For other notes concerning this item, see page 65.
Editing Mode To Dub Audio While Listening to a Pre-recorded Sound When pausing the audio dubbing, set the [12bit AUDIO] on the [PLAYBACK] Sub-Menu to [ST2] and you can check the pre-recorded sound. When a microphone (For PV-GS14/PV-GS15) is used for audio dubbing, use headphones to listen to the pre-recorded sound while dubbing the audio. (When using headphones, set [AV JACK] on the [INITIAL] to [OUT/PHONES].
Editing Mode Recorder: 3 While pressing the [ REC] Button 54 , press the [PLAY] Button 72 on the Remote Control. Or while pressing the [REC] Button 7 , press the [BACK LIGHT] Button 10 on the Camcorder. 7 10 • Recording starts. To Stop Dubbing Press the [ ] Button 69 or the [ ] Button 70 . CAUTION: Unauthorized exchanging and/or copying of copyrighted recordings may be copyright infringement. • For other notes concerning this item, see page 65.
With a PC With a PC Using the Software with a Personal Computer An image stored on the DV Cassette or Memory Card can be transferred to your personal computer. Software Installation (For Windows) 1 Turn on the personal computer and start up Windows. 2 Insert the CD-ROM into the personal computer’s CD-ROM drive. • The [Setup Menu] screen appears.
With a PC 5 Finish installation by following the on-screen instructions. • Click [Next] and proceed with installation. • After completing the installation, Click [Finish]. 6 After the USB Driver is installed, please restart your computer. • Reboot the computer to finish installing USB driver. • Installation continues after the computer reboots if you selected additional software. • A message indicating a conflict between versions may be displayed during the installation. This will not cause a problem.
With a PC [Windows 98SE/Me/2000] [Windows XP] To disconnect USB cable safely (For Windows) 1 2 If USB Cable is disconnected while computer is on, error dialog may appear. In such case click [OK] and close the dialog box. By following the steps below you can disconnect the cable safely. 1 Double click the icon in task tray. • Hardware disconnect dialog appears. • You can view images stored on the Memory Card and also save them to your hard disk.
With a PC (For Macintosh) Removing the USB Cable safely for Macintosh Operating environment OS: IBM PC/AT compatible personal computer with preinstalled; Microsoft Windows XP Home Edition/Professional (In this case of Windows XP, SP1 or later is needed.
With a PC Installing WebCam Driver 1 Turn on the personal computer and start up Windows. 3 Connect the Camcorder to your personal computer with USB Cable. 2 Insert the CD-ROM into the personal computer’s CD-ROM drive. • Quit all applications. • The [Setup Menu] Screen appears. [PV-GS15: Supplied] [PV-GS9/PV-GS12/PV-GS14: Optional Software] 3 Click the [WebCam Driver]. • “WEB” is displayed on the LCD Monitor of the Camcorder.
With a PC Setting up the Windows Messenger When starting the Windows Messenger for the first time, its setup screen is displayed. (However, the screen is not displayed if the Windows Messenger setup has already been done.) For more details, please read the corresponding Help file. 6 Click on [Audio Tuning Wizard...] in the [Tools] menu to confirm that equipment is connected correctly. 1 Click [Click here to sign in]. 7 Select [USB Video Device] in the [Camera] menu. 2 Select [.
With a PC 2 Type in your Sign-in name and password. • If you do not have your Sign-in name and password, click [Get one here]. 8 Confirm the [Panasonic DVC Web Camera Device] 1 is selected. 1 3 Please carefully read the displayed contents and then proceed. 4 After the setup is completed, sign in and start the MSN Messenger. 5 Click on [Audio Tuning Wizard...] in the [Tools] menu to confirm that equipment is connected correctly. • For other information about MSN Messenger, please refer to Help.
With a PC • The DV STUDIO 3.1E-SE cannot be operated on Windows 2000. • When 2 or more USB devices are connected to a personal computer, or when devices are connected through USB hubs or by using extension cables, proper operation is not guaranteed. • When connected to the keyboard USB Jack, normal function may not be possible. • This instruction manual describes only the procedures for installation, connection and startup. Please read the PDF-based instructions for how to use the DV STUDIO 3.1E-SE.
With a PC 4 Select [Start] >> [All Programs (Programs)] >> [Panasonic] >> [DV Studio3] >> [DV Studio3]. Operating environment (For Windows) OS: IBM PC/AT compatible personal computer with pre-installed; Microsoft Windows XP Home Edition/Professional Microsoft Windows 2000 Professional Microsoft Windows Me (Millennium Edition) Microsoft Windows 98 Second Edition CPU: • If a short-cut icon has been created on the desktop during installation, it is also possible to start by double-clicking on the icon.
With a PC 3 Click [ArcSoft]. 4 Select the desired language on the [Choose Setup Language] dialog, and click [OK]. 5 Double click [PhotoBase] or [PhotoImpression] folder. 6 Double click [English] or [French] folder. 7 Double click [PhotoBase Installer] or [PhotoImpression Installer]. • Installation begins. • Installation begins. • After reading the displayed contents, please carry out the installation according to instructions.
With a PC Notes • Macintosh is a registered trademark of Apple Computer, Inc. ArcSoft, the ArcSoft logo, ArcSoft PhotoImpression 4 and ArcSoft PhotoBase 4 are trademarks of ArcSoft, Inc. • Microsoft® Windows®, Windows Messenger®, MSN Messenger® and DirectX® are either trademarks or registered trademarks of the Microsoft Corporation in the United States and/or other countries. • Intel®, Pentium® and Celeron® are the registered trademarks or trademarks of the Intel Corporation.
With a PC About the compatibility of the card files (For PV-GS12/PV-GS14/PV-GS15) Data files recorded on an “SD Memory Card” or a “MultiMediaCard” by this Camcorder conform with DCF (Design rule for Camera File system) established by JEITA (Japan Electronics and Information Technology Industries Association). • If you attempt to play back files recorded with this Camcorder on other equipment or to play back files recorded with other equipment on this Camcorder, you may not be able to play them back.
Others Others Indications Various functions and the Camcorder status are shown on the screen. : Remaining Battery Power • When the battery power becomes low, the Indication changes. When the battery is discharged completely, ( ) Indication flashes. the R0:45: Remaining Tape Time • Remaining tape time is indicated in minutes. (When it reaches less than 3 minutes, the indication starts flashing.) Tape Recording Mode (p. 24) : : Tape Playback Mode (p. 35) : Card Recording Mode (p.
Others GAINUP: (White): Gain up Mode (p. 26) DPOF Setting completed (set to 1 or more picture) (p. 41) 640 : [640 x 480] Image size • For images not recorded with this Camcorder, the size display is determined as follows according to the number of horizontal pixels. 640 : 640 or more, less than 800 (The size is not displayed at under 640 pixels.
Others NO CARD: Card is not inserted. NO DATA: There are no recorded files in the card. UNPLAYABLE CARD: You are attempting to play back data which is not compatible with this Camcorder. CARD ERROR: The Card is not compatible with this Camcorder. COPY INHIBITED: Because the medium is protected by a copy guard, images cannot be recorded correctly. INCORRECT OPERATION: The Recording Start/Stop Button was pressed without connecting the USB cable to the PC in Picture Playback Mode.
Others • When the [SELF TIMER] is set to [ON], the Camcorder records the maximum number of recordable pictures depending on the [BURST MODE] setting. • When using a card formatted by other equipment, intervals between recorded pictures may become large. • If you repeatedly record or erase pictures, intervals between recorded pictures may become large. In this case, back up your important data on a PC, and format your card using this Camcorder.
Others • The MagicPix Function makes the signal charging time of CCD longer up to 30 times longer than usual, so that dark scenes that are invisible to the naked eyes can be recorded brightly. For this reason, a bright dots may be seen, but this is not a malfunction. • The Image Stabilizer Function does not work. In this case, the [EIS] Indication flashes. • The Soft Skin Function and the Backlight Compensation Function cannot be changed.
Others In the following cases, using the [EFFECT1] on the [DIGITAL] Sub-Menu is not possible. • When the MagicPix Mode and Light are set (pp. 26, 29) In the following cases, using the Digital Effect Function is not possible. • Title in Multi-Picture Mode • If the [MULTI] Button is pressed while self-recording Mirror Mode (p. 26) is used, the still picture is displayed from the upper right corner of the screen, but, in reality, the picture is recorded from the upper left corner as usual.
Others Creating a Title • Even if the contrast of the Title is adjusted, the portions where there is little difference between light and dark and where the boundary between light and dark is unclear may not appear. • The Title may not be clear if something small is used for it. • If titles are created, the number of images that can be recorded on a Card decreases. • If the number of images that can be recorded on a Card is small, you may not be able to create a title.
Others Cautions for Use When you use your Camcorder on a rainy or snowy day or on a beach, make sure that no water enters the Camcorder. • Water may cause the Camcorder or Cassette to malfunction. (Irreparable failure may occur.) • If sea water splashes onto the Camcorder, wet a soft cloth with tap water, wring it well, and use it to wipe the camera body carefully. Then, wipe it again thoroughly with a soft dry cloth.
Others 1 Remove the tape if it is inserted. • It takes about 20 seconds to open the Cassette Holder. This is not a malfunction. 2 Leave the Camcorder with the Cassette Compartment Cover closed to cool or warm it to the ambient temperature. DEW ] blinks in yellow When [ • You cannot use the Tape Recording/Playback Mode. Leave the Camcorder for about 30 minutes. • However, you can use the Card Recording Mode or Picture Playback Mode when the cassette is not inserted.
Others Cautions for Storage Before storing the Camcorder, take the Cassette out and detach the Battery. Store all the components in a dry place with a relatively stable temperature. (Recommended Temperature: 59 °F to 77 °F (15 °C to 25 °C), Recommended Humidity: 40 % to 60 %) Camcorder • Wrap it with a soft cloth to prevent dust from getting into the Camera. • Do not leave the Camcorder in places that expose it to high temperature.
Others Lens Hood • Is the power source connected correctly? (pp. 15-16) The Camcorder power is turned off automatically. Battery • Is the Battery fully charged? Charge it with the AC Adaptor. (p. 15) • Are you using the Battery in an extremely cold place? In cold places, the operating time of the Battery becomes shorter. (p. 68) • Has the Battery worn out? If the operating time is still too short even after the Battery is fully charged, the Battery has worn out.
Others Although the Camcorder is correctly connected to a TV, playback images cannot be seen. Playback picture is not clear. • Is [PICT QUALITY] on the [CARD] Sub-Menu set to [NORMAL] or [ECONOMY]? If recording is done with it set to [NORMAL] or [ECONOMY], images with fine details may include a mosaic-like pattern. Set [PICT QUALITY] to [FINE]. (p. 25) Photoshot Playback images do not look normal.
Others Explanation of Terms Digital Video System In a digital video system, images and sounds are converted into digital signals and recorded on a tape. This complete digital recording is capable of recording and playback with minimal image and sound deterioration. In addition, it automatically records data, such as Time Code and Date/Time, as digital signals.
Others Specifications Digital Camcorder Information for your safety Power Source: DC 7.2/7.8 V Power Consumption: Recording 4.5 W Recording Format: Mini DV (Consumer-use Digital Video SD Format) Tape Used: 6.35 mm digital video tape Recording/Playback Time: SP: 80 min.; LP: 120 min.
Others Camcorder Accessory System Accessory # Figure Description Price PV-DAC11A AC Adaptor with AC Cable and DC Cable $119.95 CGR-D08A/1B 800 mAh/1 h 30 min, Battery Pack $69.95 CGR-D16A/1B 1 600 mAh/3 h, Battery Pack $99.95 CGP-D28A/1B 2 800 mAh/5 h, Battery Pack $129.95 CGR-D53A/1K 5 300 mAh/9 h, Battery Pack $229.95 PV-DDC9 DV Interface Cable (i.LINK) (4-pin to 4-pin) $55.
Others Camcorder Accessory Order Form Please photocopy this form when placing an order. 1. Camcorder Model # 2. Items Ordered Accessory # Description Price Each Quantity Total Price Subtotal Your State & Local Sales Tax Shipping & Handling Total Enclosed 6.95 3. Method of payment (check one) Check of Money Order enclosed (NO C.O.D.SHIPMENTS) Credit Card # VISA MasterCard Expiration Date Discover Customer Signature Make Check or Money Order to: PANASONIC ACCESSORIES (Please do not send cash) 4.
Others Request for Service Notice Please photocopy this form when making a request for service notice. Request for Service Notice: In the unlikely event this product needs service. • Please include your proof of purchase. (Failure to do so will delay your repair.) • To further speed your repair, please provide an explanation of what is wrong with the unit and any symptom it is exhibiting. Mail this completed form and your Proof of Purchase along with your unit to: Panasonic Services Company 1705 N.
Others Limited Warranty PANASONIC CONSUMER ELECTRONICS COMPANY, DIVISION OF MATSUSHITA ELECTRIC CORPORATION OF AMERICA One Panasonic Way Secaucus, New Jersey 07094 PANASONIC SALES COMPANY, DIVISION OF MATSUSHITA ELECTRIC OF PUERTO RICO, INC., AVE. 65 de Infantería, Km. 9.
Others Limited Warranty Limits And Exclusions This warranty ONLY COVERS failures due to defects in materials or workmanship, and DOES NOT COVER normal wear and tear or cosmetic damage, nor does it cover markings or retained images on the picture tube resulting from viewing fixed images (including, among other things, letterbox pictures on standard 4:3 screen TV’s, or non-expanded standard 4:3 pictures on wide screen TV’s, or onscreen data in a stationary and fixed location).
Others Customer Services Directory Obtain Product Information and Operating Assistance; locate your nearest Dealer or Servicenter; purchase Parts and Accessories; or make Customer Service and Literature requests by visiting our Web Site at: http://www.panasonic.com/support or, contact us via the web at: http://www.panasonic.com/contactinfo You may also contact us directly at: 1-800-211-PANA (7262), Monday-Friday 9 am-9 pm; Saturday-Sunday 10 am-7 pm, EST.
Others Spanish Quick Use Guide/Guía Para Uso Rápido Precauciones para su seguridad ADVERTENCIA: Para evitar incendios y descargas eléctricas, no exponga este equipo a la lluvia ni a la humedad. Su Camcorder está diseñada para grabar y reproducir en el modo de Reproducción Estándar (SP) y modo Largo (LP). Se recomienda el uso sólo de cintas de cassette que hayan sido probadas e inspeccionadas para su uso .
Others Guía rápida 1 Coloque la batería en el adaptador de CA y cárguela. Inserción de una tarjeta de memoria (Sólo para el modelo PV-GS12/PV-GS14/PV-GS15) 1 Usando su pulgar presione la perilla [OPEN▼] 1 y saque la pantalla LCD 2 en la dirección de la flecha. 2 1 • Antes de usar, cargue completamente la batería. • Debido a que la batería no se cargará cuando el cable de entrada de CC esté conectado al adaptador de CA, desconéctelo del adaptador de CA.
Others Grabación de una imagen fija en cinta (Sólo para el modelo PV-GS9) 2 Gire el dial de modo a Modo de reproducción de cinta. 1 Gire el dial de modo a modo de grabación de cinta. (PV-GS12/ (PV-GS9) PV-GS14/ PV-GS15) ] para rebobinar la 3 Presione el botón [ cinta. 2 Presione el botón [PHOTO SHOT] en el modo de pausa de grabación. 4 Presione el botón [►] para comenzar la reproducción.
Others Index A H AC Adaptor ................................................ 15, 66 ArcSoft Software ............................................. 55 Audio Dubbing ................................................. 44 Auto Focus ...................................................... 71 Headphones .................................................... 64 B L Backlight .......................................................... 29 Black & White Mode ........................................
Others R U RapidFire Consecutive Photoshot ................... 26 Recording Check ............................................. 24 Recording Speed............................................. 23 Remaining Battery Power................................ 59 Remaining Tape Time...................................... 59 Remote Control ............................................... 14 Repeat Playback ............................................. 64 Request for Service Notice..............................
Panasonic Consumer Electronics Company, Division of Matsushita Electric Corporation of America One Panasonic Way Secaucus, New Jersey 07094 Panasonic Sales Company (“PSC”), Division of Matsushita Electric of Puerto Rico, Inc. Ave. 65 de Infanteria, Km. 9.