Rev 3 offset printing D20BT_en_gn.fm Page 1 Monday, June 12, 2017 1:56 PM Operating Instructions DAB-FM Radio Model No. RF-D20BT RF-D20U Thank you for purchasing this product. For optimum performance and safety, please read these instructions carefully. Please keep this manual for future reference. “EB” indicates the United Kingdom model.
Rev 3 offset printing D20BT_en_gn.fm Page 2 Monday, June 12, 2017 1:56 PM These operating instructions are applicable for models RF-D20BT and RF-D20U. RF-D20BT : Indicate features applicable to RF-D20BT. RF-D20U : Indicate features applicable to RF-D20U. Unless otherwise indicated, illustrations in these operating instructions are of RF-D20BT. Your system and the illustrations can look differently. Product Identification Marking is located on the bottom of the unit.
Rev 3 offset printing D20BT_en_gn.fm Page 3 Monday, June 12, 2017 1:56 PM Caution for AC mains lead (For the AC mains plug of three pins) For your safety, please read the following text carefully. This appliance is supplied with a moulded three pin mains plug for your safety and convenience. A 5-ampere fuse is fitted in this plug. Should the fuse need to be replaced please ensure that the replacement fuse has a rating of 5-ampere and that it is approved by ASTA or BSI to BS1362.
Rev 3 offset printing D20BT_en_gn.fm Page 4 Monday, June 12, 2017 1:56 PM Supplied accessories Check and identify the supplied accessories. 1 AC mains lead For the United Kingdom and Ireland (K2CT3YY00034) References Sales and Support Information For the United Kingdom and Ireland For Continental Europe For Australia 1 AC adaptor (TPBPA266) Note: Product numbers correct as of December 2016. These may be subject to change. TQBJ2029 Table of contents 4 Safety precautions . . . . . . . . . . . .
Rev 3 offset printing D20BT_en_gn.fm Page 5 Monday, June 12, 2017 1:56 PM AC DC Class II equipment (The construction of the product is double-insulated.) ON Standby About Bluetooth® Panasonic cannot be held responsible for data and/or information that can possibly be compromised during a wireless transmission. Frequency band • This system uses the 2.4 GHz frequency band. Certification • This system conforms to the frequency restrictions and has received certification based on frequency laws.
Rev 3 offset printing D20BT_en_gn.fm Page 6 Monday, June 12, 2017 1:56 PM Overview of controls N J 9 5 4 M L 8 3 2 K 7 1 6 A Standby/on switch [1] Press to switch the unit from on to standby mode or vice versa. In standby mode, the unit is still consuming a small amount of power. B Select “Bluetooth” as the audio source During Bluetooth® source playback, press to pause or resume the playback.
Rev 3 offset printing D20BT_en_gn.fm Page 7 Monday, June 12, 2017 1:56 PM (Important) About the splash proof █ Splash proof performance* Specifications for this unit are equivalent of IPX3 of IEC 60529. About the IPX3 (liquid ingress protection level against spraying water) This unit is compatible to operate after water spraying up to 60 degrees from vertical at 10 liters / min at a pressure of 80-100kN/m2 for 5 minutes. * Splash proof is not guaranteed under all conditions.
Rev 3 offset printing D20BT_en_gn.fm Page 8 Monday, June 12, 2017 1:56 PM Power sources █ Charging a portable device RF-D20U Using the household mains socket The USB port at the rear of the unit can be use to charge a portable device. Connect the AC adaptor and AC mains lead firmly to the unit and the household mains socket. portable device (not supplied) To household mains socket AC mains lead AC adaptor (For the AC mains plug of three pins) READ THE “Caution for AC mains lead” BEFORE CONNECTION.
Rev 3 offset printing D20BT_en_gn.fm Page 9 Monday, June 12, 2017 1:56 PM Using the batteries (not supplied) Use alkaline or manganese batteries. Install the batteries so that the poles (+ and –) align with those in the unit. This unit will use the batteries as the power source when you disconnect the AC mains lead. The battery indicator will light up. The battery indicator shows the battery levels. Getting started 1 Extend the antenna. 2 Press [1] to switch on the unit.
Rev 3 offset printing D20BT_en_gn.fm Page 10 Monday, June 12, 2017 1:56 PM DAB operation Listening to a station The first time you enter DAB mode, or if the station list is empty, the unit will start the full scan and memorise the stations. You can perform the full scan procedure when there is a new station or a station becomes available. 1 Press [ TUNE/SELECT ] to select a station from the station list. 2 Press [ENTER] to tune to the selected station. 1 Press [SOURCE] to select “DAB”.
Rev 3 offset printing D20BT_en_gn.fm Page 11 Monday, June 12, 2017 1:56 PM Manual tuning You can perform manual tuning to a particular channel or frequency. This can be useful when you are adjusting the antenna to achieve the best possible reception and scanning a particular channel to update the station list. 1 Press [MENU]. 2 Press [ TUNE/SELECT ] to select “Manual tune” and then press [ENTER]. 3 Press [ TUNE/SELECT ] to select a frequency or channel and then press [ENTER].
Rev 3 offset printing D20BT_en_gn.fm Page 12 Monday, June 12, 2017 1:56 PM Presetting stations You can preset up to 5 stations into the direct preset buttons. The first five stations are preset with a default frequency for your convenience. 1 While listening to a station, press and hold the desired direct preset button ([1] to [5]). 2 Press [ENTER] to preset the station. █ Listening to a preset station Press the direct preset button ([1] to [5]) to listen to the preset station.
Rev 3 offset printing D20BT_en_gn.fm Page 13 Monday, June 12, 2017 1:56 PM Connecting a device Disconnecting a device Preparation If this system is connected to a Bluetooth® device, disconnect it (Z“Disconnecting a device”). While a Bluetooth® device is connected 1 Press [MENU]. 1 Press [ ]. “Bluetooth Ready” is shown. 2 2 Select “RF-D20BT” or “RF-D20U” from the Bluetooth® menu of the device. Press [ TUNE/SELECT ] to select “Disconnect” and then press [ENTER].
Rev 3 offset printing D20BT_en_gn.fm Page 14 Monday, June 12, 2017 1:56 PM System settings █ To view the System menu When in DAB or Bluetooth mode 1 Press [MENU]. 2 Press [ TUNE/SELECT ] to select “System” and then press [ENTER]. █ To navigate around the menu Press [ TUNE/SELECT ] to select an item or option. Press [ENTER] to confirm. Example: Backlight setting displays Indicates current setting When in FM mode Press [MENU]. Alarm The Alarm Wizard is shown.
Rev 3 offset printing D20BT_en_gn.fm Page 15 Monday, June 12, 2017 1:56 PM Time The time and date information are updated automatically with the DAB/RDS broadcast (if available). You can also set the time and date manually with the Time menu. This is a 24 hour clock. • Set time: Set the hours and minutes. • Set date: Set the day, month and year. Dimmer • Off: Switches off the function. • Dimmer 1: Decrease the brightness of the backlight. • Dimmer 2: Further decrease the brightness of the backlight.
Rev 3 offset printing D20BT_en_gn.fm Page 16 Monday, June 12, 2017 1:56 PM Bluetooth® Messages Pairing cannot be done. • Check the Bluetooth® device condition. • The device is out of the 10 m communication range. Move the device nearer to the system. “Alarm Not Saved.” • The changes made to the alarm was not saved, the changes will be lost. The device cannot be connected. • The pairing of the device was unsuccessful. Do pairing again. • The pairing of the device has been replaced. Do pairing again.
Rev 3 offset printing D20BT_en_gn.fm Page 17 Monday, June 12, 2017 1:56 PM Specifications RF-D20BT RMS output power 3 W per channel (4 Ω), 1 kHz, 10% THD 2 W per channel (4 Ω), 1 kHz, 10% THD AC adaptor Battery RF-D20U RMS output power 2 W per channel (4 Ω), 1 kHz, 10% THD 2 W per channel (4 Ω), 1 kHz, 10% THD AC adaptor Battery Tuner Preset memory Frequency modulation (FM) Frequency range DAB DAB memories Frequency band (wavelength) Band III Sensitivity *BER 4x10-4 Min requirement FM 5 stations 87.
Rev 3 offset printing D20BT_en_gn.fm Page 18 Monday, June 12, 2017 1:56 PM Dimensions (W x H x D) 90 mm x 140 mm x 100 mm Mass With batteries Without batteries AC adaptor 0.7 kg 0.6 kg 0.1 kg Operating temperature range Operating humidity range 0°C to +40°C 20% to 80% RH (no condensation) Splash proof IPX3 or equivalent Battery life ( RF-D20BT Operate at 120 mW with LCD Backlight OFF) ( RF-D20U Operate at 80 mW with LCD Backlight OFF) Power source Bluetooth® FM/DAB Manganese R6 battery Approx. 2.
Rev 3 offset printing D20BT_en_gn.fm Page 19 Monday, June 12, 2017 1:56 PM RF-D20BT English Declaration of Conformity (DoC) Português Declaração de Conformidade (DoC) Hereby, “Panasonic Corporation” declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. Com o presente documento, a “Panasonic Corporation” declara que este produto é conforme os requisitos específicos e demais especificações referentes à Directriz 2014/53/UE.
Rev 3 offset printing D20BT_en_gn.fm Page 20 Monday, June 12, 2017 1:56 PM Slovensko Izjava o skladnosti (DoC) S pričujočo izjavo podjetje “Panasonic Corporation” izjavlja, da so svoji izdelki skladni s poglavitnimi zahtevami in drugimi odgovarjajočimi predpisi direktive 2014/53/EÚ. Stranka lahko naloži izvod izvirnega DoC o naših izdelkih RE s strežnika DoC: http://www.doc.panasonic.
Rev 3 offset printing D20BT_en_gn.fm Page 21 Monday, June 12, 2017 1:56 PM Kompānija “Panasonic Corporation” ar šo paziņo, ka šis izstrādājums atbilst būtiskām prasībām un citām saistošām Direktīvas 2014/53/ES prasībām. Magyar Megfelelőségi Nyilatkozat (DoC) Ezennel a, “Panasonic Corporation” kijelenti, hogy a jelen termék kielégíti az 2014/53/EU Irányelv létfontosságú követelményeit és más vonatkozó rendelkezéseit.
Rev 3 offset printing D20BT_en_gn.fm Page 22 Monday, June 12, 2017 1:56 PM Limited Warranty (For Australia only) Panasonic Warranty 1. The product is warranted for 12 months from the date of purchase. Subject to the conditions of this warranty Panasonic or its Authorised Service Centre will perform necessary service on the product without charge for parts or labour, if in the opinion of Panasonic, the product is found to be faulty within the warranty period. 2.
Rev 3 offset printing D20BT_en_gn.fm Page 23 Monday, June 12, 2017 1:56 PM • • Send or take the product to a Panasonic Authorised Service Centre together with your proof of purchase receipt as a proof of purchase date. Please note that freight and insurance to and / or from your nearest Authorised Service Centre must be arranged by you.
Rev 3 offset printing D20BT_en_gn.fm Page 24 Monday, June 12, 2017 1:56 PM Disposal of Old Equipment and Batteries Only for European Union and countries with recycling systems These symbols on the products, packaging, and/or accompanying documents mean that used electrical and electronic products and batteries must not be mixed with general household waste.
