Operating Instructions

7
TQBJ2225
Unit on/standby
1 Extend the antenna. (l 5)
2 Press [Í/I] to turn on the unit.
≥ The first time you turn on the unit, it will enter DAB mode
and automatically scan for stations. It sets the time and
date (if data is available) and starts playing the first station
it finds.
Press [Í/I] again to switch the unit to standby mode.

≥ The unit is not turned off completely even in the standby
condition. In the interest of energy conservation, if you will
not be using the unit for an extended period of time, we
recommend disconnecting the mains plug from the mains
socket or removing the batteries. The unit consumes a
small amount of power even in the standby condition.
(l 13)
≥ In standby mode, the time and date are displayed when the
unit is powered via the AC adaptor. (l 10)
Listening to DAB/DAB+
Preparation
≥ Extend the antenna. (l 5)
≥ Turn the unit on.
≥ Press [DAB/FM] repeatedly to select “DAB”.
The first time you enter DAB mode, or if the station
list is empty, the unit will start the full scan and
memorise the stations.
You can perform the full scan procedure when there
is a new station or a station becomes available.
Press and hold [j MENU] for at least 2 seconds to
select “Full scan” and then press [ENTER] to start full
scan.
≥ To cancel, press [j MENU].
∫ Remove unavailable listed stations
This unit indicates those stations that are closed or
no longer available with a question mark in front of
the station name. You can remove these stations
from the station list.
1 Press and hold [j MENU] for at least 2 seconds.
2 Press [4/:]
§
or [3/9]
§
to select “Prune”
and then press [ENTER].
3 Press [4/:]
§
or [3/9]
§
to select “Yes” and
then press [ENTER].
≥ To cancel, select “No”.
§ Alternatively, you can turn [TUNE/SELECT] to select
menu item/setting.
1 Turn [TUNE/SELECT] to select a station from the
station list.
2 Press [ENTER] to tune to the selected station.

≥ “ ” indicates a secondary service station. Secondary
service stations are always listed next to their primary
station in the station list.
You can preset up to 10 DAB/DAB+ channels.
While listening to the radio broadcast:
Press and hold the direct preset button ([1] to [10]) for
at least 2 seconds to enter your desired preset
channel number.

≥ The station occupying a channel is erased if another
station is preset in that channel.
Press one of the direct preset buttons ([1] to [10]) to
select the preset station.
Memorising stations
Listening to the memorised
stations
Presetting DAB/DAB+ stations
Listening to preset DAB/DAB+
stations
RF-D30BT_TQBJ2225_eng.book 7 ページ ２０２０年５月１３日 水曜日 午前１１時４４分