Operating Instructions

6
Presetting
Stations can be preset into channels to
make selection easier. You can preset up
to 10 channels.
To preset
To select a channel
Select the station
you want to set as
the preset.
• To select a number greater than 5
e.g. 7: Press [5+] and press and hold [2]
• To select a number greater than 5
e.g. 7: Press [5+] and press [2]
→
—
Press and hold the
desired numbered
button for more
than 1 second
—
Press
You cannot preset stations when the station is not
broadcasting or when you are selecting a secondary service.
Note
Select “DAB”
DAB MUSIC
M 1 : PROGRAM
Within 10 seconds
e.g. 7:
→
Within 10 seconds
DAB Preparatory steps
(Other functions)
First of all, make sure the unit is in DAB mode.
• To cancel partway
Press PressSelect “DAB SCAN
MODE”, “SIGNAL
QUALITY”, or “AUTO
CLOCK ADJ.”
Press
Within 10 seconds
Listening to a secondary service
“ ” is displayed if there is a secondary service
broadcast.
Secondary service can be selected with each press and hold of the
button. The unit returns to the primary service after the last secondary
service.
Press and hold
Select a secondary service
Display
You can change information displays.
The following information displays are available while enjoying DAB.
Each time you press the button:
Select a display
DAB MUSIC
Information
DAB MUSIC
Pop Music
DAB MUSIC
CLOCK 12 : 00
DAB MUSIC
11D- 222.064MHz
DAB MUSIC
DAB ENSEMBLE ONE
– – – – MENU – – – –
CLOCK ADJUST
– – – – MENU – – – –
DAB SCAN MODE
– – – – MENU – – – –
SIGNAL QUALITY
– – – – MENU – – – –
TIMER ADJUST
– – – – MENU – – – –
TIMER ON/OFF
– – – – MENU – – – –
AUTO CLOCK ADJ.
Automatic clock
adjustment function
A
Time information that is
transmitted during DAB
broadcasting is read and the time
is adjusted automatically.
This function is preset to ON.
While monitoring the signal quality on
the display, adjust the antenna to
improve reception.
Checking the DAB
signal quality
B
First, select “SIGNAL QUALITY” in the DAB preparatory steps.
• To cancel the signal quality check
Press .
Select the
frequency
Frequency
block
12B - 225.648MHz
Reception quality 0
(poor) -16 (excellent)
Frequency
In order to enjoy the new stations after adjusting the antenna,
it is necessary to perform Auto scanning and update the
station memory.
Note
First, select “AUTO CLOCK ADJ” in the DAB preparatory steps.
Select “ADJUST OFF” Press
Within 10 seconds
– AUTO CLOCK ADJ –
ADJUST OFF
Select “ADJUST ON” to turn the automatic clock adjustment function
on.
• To cancel partway
Press .
Dynamic label
(information about the broadcast) PTY display (program type)
Time display
Frequency display
Ensemble label
(the name of the ensemble)
( page 7)
( page 8)
( page 8)
To set the function to OFF
RF-D7_5-0202 07.2.2 0:56 PM ページ 6