User Manual

Preparation

1 Turn on this unit.

• Press and hold [Í/I ( )] of this unit for approx. 3 seconds until the power/pairing LED (blue) blinks.

• A guidance message will be heard, and the power/pairing LED (blue) will blink slowly.

2 Perform steps 2 and 3 of “Pairing (Registration) this unit with the Bluetooth

device for

connection”. (

l 8)

• When the power/pairing LED (blue) blinks twice every approx. 2 seconds, pairing (registration) is completed.

(Connection established)

Note

• This unit remembers the device lastly connected. Connection may be automatically established after step 1 (see

above).

• If connection to a device is not established within approximately 5 minutes, the unit will be turned off. Turn on the unit

again. ([HD605N] Except for when noise cancelling is turned ON.)

Connecting a paired Bluetooth

device