Operating instructions

Restoring to the factory settings

When you want to delete all pairing device information, etc., you can restore the

unit to the factory settings (original settings upon purchase). Charge the battery

before restoring the unit.

1 Press and hold

for approximately 5 seconds

• Start searching for Bluetooth

devices to connect.

2 Press and hold + and − for 5 seconds or more simultaneously while

searching

• The LED will blink fast in blue. The unit will restore to the factory settings.

●

The Bluetooth

word mark and logos are registered trademarks owned by

Bluetooth SIG, Inc. and any use of such marks by Panasonic Corporation is

under license.

Other trademarks and trade names are those of their respective owners.

●

Other system names and product names appearing in this document are in

general the registered trademarks or trademarks of the respective developer

companies.

Note that the ™ mark and ® mark do not appear in this document.

Maintenance

Clean this unit with a dry and soft cloth.

• Do not use solvents including benzine, thinner, alcohol, kitchen detergent, a

chemical wiper, etc. This might cause the exterior case to be deformed or the

coating to come off.

Keeping the battery performance

• During the long period of disuse, full charge this unit once every 6 months to

keep the battery performance.

Other