Operating Instructions

Operation

Using noise cancelling

While using the noise cancelling function, changes the volume and sound quality. The sound quality is set so

that it is optimised for each level.

∫ About noise cancelling level

You can select one of the following levels to suit your preference.

• The default level setting is “Noise cancelling High”.

– Noise cancelling High

– Noise cancelling Medium

– Noise cancelling Low

1 Press [NC].

• Each press of [NC] switches between three levels and Off.

“Noise cancelling High” ------------# “Noise cancelling Medium”

: ;

“Noise cancelling Off” !------------ “Noise cancelling Low”

• While using the noise cancelling function, the noise cancelling LED

lights in green.

2 Adjust the volume of the playback device.

Note

• While using the noise cancelling function, a very small amount of noise which is generated from the circuit that

reduces noise may be heard, but this is normal and not indicative of any trouble. (This very-low-level noise may be

heard in quiet places or in the blank parts between tracks.)

• If [NC] is pressed for at least approx. 2 seconds, the audio guidance will announce the current level.

• It is possible to switch the language of the audio guidance. (

l 16, “Guidance messages”)