Operating Instructions

Preparation

Connecting a Bluetooth

device

1 In the power-off state, press and hold [Í/I ( )] of this unit until the power/pairing LED

blinks.

• The unit starts to search for the Bluetooth

device for connection, and the power/pairing LED will blink in blue

and red alternately.

2 Turn on the power of the Bluetooth

device, and enable the Bluetooth

function.

3 Select “RP-HD610N” from the Bluetooth

device’s menu.

• A MAC address (an alphanumeric character string that is displayed by

and unique to the device) may be displayed before “RP-HD610N” is

displayed.

• If prompted for a passkey, input the passkey “0000 (four zeros)” of this

unit.

4 Check the connection with the Bluetooth

device on the

unit.

• The power/pairing LED will blink in blue and red alternately until the connection with the device is completed.

When the power/pairing LED (blue) blinks twice every approx. 2 seconds, pairing (registration) is completed.

(Connection established)

Note

• If connection to a device is not established within approximately 5 minutes, the unit will be turned off. Perform pairing

again. (Except for when noise cancelling is turned ON.)

• You can pair up to 8 Bluetooth

devices with this unit. If a 9th device is paired, the device with the oldest connection

will be replaced. To use it, perform pairing again.

Preparation

• Place the Bluetooth

device within approx. 1 m from the unit.

• Check the device operation using its operation instructions as required.

Pairing (Registration) this unit with the Bluetooth

device for connection

When using the Google Assistant, refer to “Using the Google Assistant” (l 13) before performing the

following settings.

When pairing a device for the first time: approx. 3 seconds

When pairing a second or subsequent devices: approx. 5 seconds

Bluetooth

Bluetooth ON

RP-HD610N

Device

e.g.

Select