Operation Manual
VQT2M18
19
Each time you press
•
A-B
/
MENU
while stopped, the playback
style is switched as follows.
Repeat play/Successive play
ALL → ALL → No display →
“ALL” display
The selected file until
the last file in the selected folder are
played successively. The unit stops
when the playback finishes.
(The factory setting is “ALL”.)
“ALL ” display
Plays all files in the
folder repeatedly.
The display changes to “ ”
(lighting) and repeat play starts.
Cancelling A-B Repeat:
Press
•
A-B
/
MENU
or
u
,
i
while playing. Or
press
STOP
.
Press
•
A-B
/
MENU
while playing.
1
A-B Repeat play
Playback repeats between the start point (A)
and finish point (B) if those points are set.
*
You cannot set A-B Repeat in the following cases;
•
Within approx. 1 second from the beginning of
the file and within approx. 2 seconds from the
end of the file
•
Less than approx. 2 seconds between the start
point (A) and finish point (B)
*
When only the start point (A) is set and playback
continues until the end of the file, the end becomes
the finish point (B) and A-B Repeat begins.
*
During A-B Repeat playback, the Slight return
playback (
➜
page 18) is not available.
The start point (A) is set and
“ ” (blinking) and “ ”
(lighting) are displayed.
Repeat play/Successive play, A-B Repeat play
No display
When the playback for
one file finishes, the unit stops.
“ ” display
Plays one file repeatedly.
* Select one of the above settings
and, press
q
/
g
to start playback.
Press
•
A-B
/
MENU
at the finish point (B).
2
STOP
•
A-B
/
MENU
Advanced Operations
4475AA'A'P836/AKPFF4475AA'A'P836/AKPFF ඦ೨ඦ೨