Portable Stereo CD System Operating Instructions Model No. RX-EX1

RQT5671
20
Timer
Y
Y
ALL
RANDOM
1
-
1
PLAY
REC
FADER
RE
PGM
EQ ON
MONO
ST
REC
ALL
RANDOM
1
-
1
PLAY
REC
RE
PGM
EQ ON
MONO
ST
REC
SLEEP
FADER
SLEEP
Using the Timer
To check the settings (when unit is off)
Press [CLOCK/TIMER].
The settings are shown in the following order:
Start time, Finish time Source Volume Clock
To change the settings (when unit is on)
To change the times
Do steps , , , and .
To change the source or volume
1. Press [ PLAY/REC] to clear the timer indicator.
2. Make changes to the source or volume.
3. Do steps to .
You can enjoy other sources after you have set
the timer.
Turn the unit off before the timer’s start time.
The play and record timers cannot be used together.
The Sleep Timer
Remote control only
Set the unit to stop and turn off after a certain time.
While listening to a CD, a cassette, or the radio.
Press [SLEEP] to select the time (in minutes).
Each time the button is pressed
SLEEP 30 SLEEP 60 SLEEP 90
SLEEP OFF SLEEP 120
To cancel
Press [SLEEP] to select “ SLEEP OFF ” .
To check the remaining time
Press [SLEEP] once.
The remaining time is shown for about 5 seconds.
To change the time.
Press [SLEEP] to select the new time.
The sleep timer can be used in combination with the play
and record timers. Make sure the unit is off before the play
or record timer's set start time.
The Timer Fader
Remote control only
Volume increases slowly to the set level when a timer turns
the unit on and decreases slowly when the sleep timer
turns the unit off.
Press [TIMER FADER] to display “ ”.
(All timers will be affected.)
Press again to cancel.
This feature does not affect record timer’s recordings.
re-ex1(p16-p22)[P] 00.12.28, 4:53 PM20