Operating Instructions

ManualsBrandsPanasonic ManualsAV ProductsRXCT60

RQT7611-1G

GU GS

Dear customer

Thank you for purchasing this product.

Before connecting, operating or adjusting this product, please read

these instructions completely.

Please keep this manual for future reference.

Table of contents

Control guide .................................................................................3

Speaker connection

.....................................................................4

Power supply

.................................................................................5

The radio

.........................................................................................6

Tapes

................................................................................................7

Recording the radio

.....................................................................8

Recording tape to tape

................................................................9

Other functions

...........................................................................10

Troubleshooting guide

.............................................................11

Maintenance

................................................................Back cover

Specifications

.............................................................Back cover

RX-CT65

Supplied accessories

Check the packaging for these accessories.

1 AC power supply cord

The included AC power supply cord is for use with this unit only.

Do not use it with other equipment.

Note

Portable Stereo Component System

Operating Instructions

Model No. RX-CT65

RX-CT60

Summary of content (12 pages)

PAGE 1
Portable Stereo Component System Operating Instructions RX-CT65 Model No. RX-CT65 RX-CT60 Dear customer Thank you for purchasing this product. Before connecting, operating or adjusting this product, please read these instructions completely. Please keep this manual for future reference. Table of contents Control guide .................................................................................3 Speaker connection .....................................................................4 Power supply .
PAGE 2
These operating instructions are applicable to models RXCT65 and RX-CT60, however, are intended primarily for model RX-CT65. CAUTION: Change the voltage setting to suit the AC voltage in your area. See page 5. Note that the unit will be seriously damaged or fail to operate correctly if this setting is not made correctly. CAUTION! • DO NOT INSTALL, OR PLACE THIS UNIT IN A BOOKCASE, BUILT-IN CABINET OR IN ANOTHER CONFINED SPACE. ENSURE THE UNIT IS WELL VENTILATED.
PAGE 3
Control guide RX-CT65 1 15 16 RX-CT60 2 3 4 5 6 7 8 9 1 10 11 12 13 14 17 18 19 20 21 22 23 24 25 21 26 28 32 33 15 27 29 34 30 35 Speakers (woofer) Speakers (tweeter) Built-in microphone (MIC) Preset equalizer buttons Band selector (BAND) RX-CT65 Operation/battery check/deck 2 tape direction indicators (OPERATION/BATT, REV, FWD) RX-CT60 Operation/battery indicator (OPERATION/BATT) Editing speed/FM mode/beat proof selector (EDIT/FM MODE/BP) Fine tuning control (FINE TUNING) Function sel
PAGE 4
Speaker connection A Connect the speaker cords B Attaching the speakers C Detaching the speakers RELEASE RX-CT65 2 RX-CT60 1 Before attaching or detaching the speakers, Be sure to disconnect the speaker cords. Be sure to set [SELECTOR] to “TAPE/ OPR OFF ”. • The function selector switch does not separate entire unit from mains even if in “TAPE/ OPR OFF ” position. A Connect the speaker cords Connect only positive (red) wires to positive negative (black) wires to negative terminals.
PAGE 5
Power supply AC power supply cord A 1 B Batteries C Car battery cord VOLT ADJ 220240V 220240V 110127V 110-127V 110127V 220-240V R20/LR20 (D, UM-1) 3 6 AC IN ~ 2 1 4 7 8 2 5 DC IN (12-13.2V) To household AC outlet 2 1 a A AC power supply cord Set the voltage. Use a flat-head screw-driver to turn the voltage selector for the area in which the unit will be used. Connect the AC power supply cord (included). Cautions • Do not touch it with wet hands. • Do not place heavy objects on it.
PAGE 6
The radio A 1 2 SELECTOR CD/ LINE IN BAND FM MW SW1 SW2 3 To improve reception TUNING RADIO FM TAPE/ OPERATION/BATT MW/SW1 EDIT/FM MODE/BP FINE TUNING HIGH/ STEREO/II NORMAL/ STEREO/II L H MIC/ MONO/I Follow steps 1 to 3. In step 1: “OPERATION/BATT” lights while the radio is on. In step 2: Select FM, MW, SW1 or SW2. To turn off the radio Set [SELECTOR] to “TAPE/ OPR OFF ”. A To improve reception FM: Raise and extend the whip antenna.
PAGE 7
Tapes RX-CT65 3 2 1 SELECTOR CD/ LINE IN 3 2 RX-CT60 3 2 1 SELECTOR CD/ LINE IN RADIO RADIO TAPE/ TAPE/ OPERATION/BATT OPERATION/BATT Use normal position/TYPE I tape only. Tape can be played either DECK 1 or DECK 2. Follow steps 1 to 3. In step 1: Set to “TAPE/ OPR OFF ”. In step 2: Insert the tape with the side to be played facing out ( ) and close by hand. • Tapes exceeding 100 minutes are thin and can break or get caught in the mechanism.
PAGE 8
Recording the radio A 3 2 1 Erasure prevention TUNING Side A Tab for Side A Tab for Side B EDIT/FM MODE/BP HIGH/ STEREO/II NORMAL/ STEREO/II MIC/ MONO/I Use normal position/TYPE I tape only. Follow steps 1 to 3. In step 1: Set [SELECTOR] to “RADIO” and tune to the station. ( page 6) In step 2: Insert the tape inside with the side to be recorded facing out and close by hand. In step 3: [ PLAY] is also depressed with [ REC]. Recording stops and the button is released when the front side finishes.
PAGE 9
Recording tape to tape 2 4 EDIT/FM MODE/BP HIGH/ 1 3 SELECTOR CD/ STEREO/II LINE IN NORMAL/ RADIO STEREO/II MIC/ TAPE/ MONO/I 6 5 7 RX-CT65 RX-CT60 Use normal position/TYPE I tape only. Follow steps 1 to 7. In step 1: Set [SELECTOR] to “TAPE/ OPR OFF ”. In step 2: Insert the tape inside with the side to be recorded facing out and close by hand. In step 3: Insert the tape inside with the side to be played facing out and close by hand. In step 4: Set the editing speed.
PAGE 10
Other functions A 2 Playing and Recording from an externally connected CD player etc. 1 SELECTOR Recording through the C built-in microphone (MIC) B 2 CD player,etc.
PAGE 11
Other functions C Headphones To connect headphones, Plug type: 3.5 mm stereo Plug in firmly. Avoid listening for prolonged periods of time to prevent hearing damage. Troubleshooting guide Before requesting service, make the below checks. If you can’t fix the system as described below, or if something not listed here occurs, consult your dealer for instructions. Reference pages are shown as black circled numbers . Common Problems No sound. Turn the volume up. The speaker cords may be shorted.
PAGE 12
Maintenance If the surfaces are dirty To clean this unit, wipe with a soft, dry cloth. • Never use alcohol, paint thinner or benzine to clean this unit. • Before using chemically impregnated cloth, read the instructions that came with the cloth carefully. For a cleaner crisper sound Clean the heads regularly to assure good quality playback and recording. Use a cleaning tape (not included). Specifications Radio Frequency range FM MW SW1 SW2 87.5–108 MHz 520–1610 kHz 2.3–7.0 MHz 7.0–22.