Operating Instructions

5
RQT7611
Set the voltage.
Use a flat-head screw-driver to turn the voltage selector for the
area in which the unit will be used.
Connect the AC power supply cord (included).
AC power supply cord
A
Batteries
B
Car battery cord
C
Insert the plug into the DC Input Jack.
Plug the other end into the cigarette lighter socket in your car.
Power supply
AC power supply cord
A
Cautions
Insert your finger into the slot ( ) at the bottom of the unit and push
out the batteries.
Removal
Disconnect the AC power supply cord.
Replace the batteries when “OPERATION/BATT” goes dim during
play.
To prevent damage to the batteries and electrolyte leakage, heed the
following points.
• Do not use rechargeable type batteries.
• Align the and polarities properly when inserting the batteries.
• Do not mix different types or makes of batteries or old and new
batteries.
• Remove batteries if you do not plan to use the unit for a long time.
If electrolyte leaks from the batteries, consult your dealer.
Wash thoroughly with water if electrolyte comes in contact with any
part of your body.
Batteries
B
Car battery cord
C
1
2
VOLT ADJ
110-127V
220-
240V
220-240V
220-
240V
110-
127V
110-
127V
AC IN ~
R20/LR20 (D, UM-1)
3
5
4
6
8
7
1
2
a
1
2
DC IN
(12-13.2V)
• Do not touch it with wet hands.
• Do not place heavy objects on it.
• Poor connection and cord damage can cause fire or electric shock.
• Grasp the plug firmly when unplugging the cord. Pulling the AC
power supply cord can cause electric shock.
• Disconnect the AC power supply cord from the household AC outlet
if the unit is not going to be used for a long time.
To household
AC outlet