Operating Instructions
9
RQT7611
Recording tape to tape
Use normal position/TYPE
I
tape only.
Follow steps 1 to 7.
In step 1: Set [SELECTOR] to “TAPE/ ”.
In step 2: Insert the tape inside with the side to be recorded facing out and
close by hand.
In step 3: Insert the tape inside with the side to be played facing out and close
by hand.
In step 4: Set the editing speed.
HIGH: High speed
NORMAL: Normal speed
In step 6: [ PLAY] is also depressed with [ REC].
In step 7: Editing is started by means of the synchro start function.
Recording stops and the button is released when the front side finishes.
(DECK 1)
To stop recording
Press [ STOP/EJECT].
To pause recording
Press Deck 1 [ PAUSE].
To resume recording, press Deck 1 [ PAUSE] again.
• Do not change the editing selector during editing. The playback
sound may flutter.
• Any changes made to the volume or sound quality during recording
will not affect the recording.
Note
OPR OFF
SELECTOR
HIGH/
STEREO/II
MIC/
MONO/I
NORMAL/
STEREO/II
EDIT/FM MODE/BP
CD/
LINE IN
RADIO
TAPE/
1234
567
RX-CT65 RX-CT60