Operating Instructions

- 10 -
[D552]
Listening to DAB/DAB+
Preparation
≥ Extend the antenna. (l 5)
≥ Turn the unit on.
≥ Press [O, N SELECT] (this unit: [DAB/FM]) repeatedly
to select “DAB+”.
To listen to DAB/DAB+ broadcasts, the available stations
need to be memorised in this unit.
≥ This unit will automatically start the “DAB AUTO SCAN”
and memorise the stations that are available in your
region if you select “DAB+” for the first time.

≥ “SCAN FAILED” is displayed when the auto scan is
unsuccessful. Locate the position with the best reception (l 11,
“To verify or improve the signal reception quality”) and then
re-scan DAB/DAB+ stations.
∫ To re-scan DAB/DAB+ stations
When new stations are added or when the antenna has
been moved, reperform the auto scan.
1 Press [PLAY MENU] to select “AUTO SCAN” and
then press [OK].
2 While “START?” is flashing,
Press [OK].

≥ When updating the station memory with the auto scan, preset
stations will be erased. Preset them again (l below).
1 Press [PLAY MENU] repeatedly to select “TUNE
MODE”.
2 Press [3, 4] to select “STATION” and then press
[OK].
3 Press [:/6] or [5/9] to select the station.
You can preset up to 20 DAB/DAB+ channels.
Channel 1 to 5 will be set under [1] to [5] on this unit.
(l right, “Changing the stations stored under [1] to [5]”)
1 While listening to a DAB/DAB+ broadcast
Press [OK].
2 Press [3, 4] to select the desired preset channel
number and then press [OK].

≥ You cannot preset stations when the station is not broadcasting
or when the secondary service is selected.
≥ The station occupying a channel is erased if another station is
preset in that channel.
(On this unit)
You can change the stations stored under [1] to [5] easily.
While listening to a DAB/DAB+ broadcast
Press and hold one of [1] to [5] until “P ” appears on the
display.
(“  ” stands for a number.)

≥ When you change the stations stored under [1] to [5], channel 1
to 5 are also changed to the same corresponding stations.
1 Press [PLAY MENU] repeatedly to select “TUNE
MODE”.
2 Press [3, 4] to select “PRESET” and then press
[OK].
3 Press [:/6] or [5/9] to select the station.
≥ You can select channel 1 to 5 by pressing one of [1] to [5] on this
unit.

≥ To select by preset, make sure that stations have already been
preset manually.
≥ To add additional preset stations, select the station using the
method mentioned in “Listening to the memorised stations”
(l left).
Some DAB/DAB+ stations provide a secondary service as
well as the primary service. If the station you are listening
to is providing secondary service, “ ” will light up.
1 While “ ” lights up
Press [PLAY MENU] repeatedly to select
“DAB SECONDARY”.
2 Press [3, 4] to select the secondary service and
press [OK].

≥ The setting will go back to primary service when changes are
made (e.g. the station is changed).
Memorising stations
Listening to the memorised stations
Presetting DAB/DAB+ stations
Changing the stations stored under [1]
to [5]
Listening to preset DAB/DAB+ stations
Listening to the secondary service