Operating Instructions

- 7 -
Inserting media
≥ When opening the disc lid, open it with the handle folded
down.
1 Push [ ] on the disc lid to open it.
2 Put in a disc with the label facing up.
3 Push [ ] again to close the disc lid.
To remove a disc
≥ Do not open the disc lid when “READING” is displayed.
(Wait for this message to disappear.)
≥ Ensure the disc is stopped before removing it.
Insert the USB device directly. Do not use any USB
extension cable.
≥ Please disconnect the USB device if you finish using.
≥ Before removing the USB device, select a source other than
“USB”.

≥ Before moving this unit, be sure to remove all media and turn this
unit off.
About Bluetooth
®
∫ Frequency band used
≥ This system uses the 2.4 GHz frequency band.
∫ Certification of this device
≥ This system conforms to frequency restrictions and has
received certification based on frequency laws. Thus, a
wireless permit is not necessary.
≥ The actions below are punishable by law in some
countries:
– Taking apart or modifying the system.
– Removing specification indications.
∫ Restrictions of use
≥ Wireless transmission and/or usage with all Bluetooth
®
equipped devices is not guaranteed.
≥ All devices must conform to standards set by Bluetooth
SIG, Inc.
≥ Depending on the specifications and settings of a
device, it can fail to connect or some operations can be
different.
≥ This system supports Bluetooth
®
security features. But
depending on the operating environment and/or
settings, this security is possibly not sufficient. Transmit
data wirelessly to this system with caution.
≥ This system cannot transmit data to a Bluetooth
®
device.
∫ Range of use
≥ Use this device at a maximum range of 10 m. The range
can decrease depending on the environment, obstacles
or interference.
∫ Interference from other devices
≥ This system may not function properly and troubles
such as noise and sound jumps may arise due to radio
wave interference if this system is located too close to
other Bluetooth
®
devices or the devices that use the
2.4 GHz band.
≥ This system may not function properly if radio waves
from a nearby broadcasting station, etc. is too strong.
∫ Intended usage
≥ This system is for normal, general use only.
≥ Do not use this system near an equipment or in an
environment that is sensitive to radio frequency
interference (example: airports, hospitals, laboratories,
etc).
Inserting a disc
Connecting a USB device
Lift the disc from the dent.
Panasonic bears no responsibility for data and/or
information that is compromised during a wireless
transmission.