Manual

I Makinga recording
INPUT SELEC_Ro_
] TAPEMONITOR
%
Before recording, prepare the tape deck for recording.
See the tape-deck's operating instructionsfor details.
[] Turn [INPUT SELECTOR] to select the source
to be recorded.
Anysourcecan beselectedexceptTAPE,
[] Begin recording on the tape deck.
Follow your tape deck's operating instructions.
!_! Begin the source to be recorded.
Followyour equipment's operating instructions.
To check Ihe sound recorded while a recording is being I
made [] . J
It is possible to check the sound being recorded if your tape deck
isa 3 head system.
Press [TAPE MONITOR] on this unit and set the
monitor button on the tape deck to "TAPE".
Press {TAPE MONITOR] once again to turn it off.
Before recording, prepare VCR for recording.
See the VCR's operating instructionsfor details.
[] Turn [INPUT SELECTOR] to select the source
to be recorded.
Any source can be selected except VCR and TAPE,
Recording from the tape deck is not possible.
[] Begin recording on the VCR.
Forlow your VCR's operating instructions.
!_! Begin the source to be recorded.
Follow your equipment's operating instructions.
When you select DVD 6CH INPUT mode, only sound from the
front left and right speakers is recorded.
To record all 6 channels
Set the playback mode on your DVD player or decoder to 2
channel (stereo) mode.
For details, see the instruction manual that came with the
connected equipment.
[e]_]
ROT4731