Manual

I
I
i
/
AMAN
AMLOOPANT
FM Outdoor antenna
(not included)
75 .Q coaxial cable
(not included)
O Removea pieceof theouter
vinylinsulator.
_Z_)"" 201_m_m(25/32")
(_ "l:wistthe shield braid
to expose the core Core wire
wire.
Shield braid 10 mm (3/8")
_) Connect the shield braid and the
core wire as shown at the left.
Vinyl-covered wire
(not included)
/ ,
AM loop antenna
(included)
[]
An outdoor antenna should be used when using this unit in moun-
tainous areas or in spaces enclosed by reinforced concrete where
the FM indoor antenna (included) does not provide satisfactory
reception.
Disconnect the FM indoor antenna if an FM outdoor antenna is
installed.
An outdoor antenna should be installed by a qualified technician
only.
[]
An outdoor antenna should be used when using this unit in
mountainous areas or in spaces enclosed by reinforced concrete
where the AM loop antenna (included) does not provide satisfactory
reception.
Stretch 5-12 m (16-40 ft.) of vinyl-covered wire horizontally across
a window frame or other convenient location, keeping it as high as
possible from the ground.
When the unit is not in use, disconnectthe outdoorantenna to
preventpossibledamage that may be causedby lightning.Never
usean outdoorantennaduringan electricalstorm.
Be sure to connect the AM loop antenna even when an outdoor
antenna is used.