CD MENU VOLUME ENTER RETURN INPUT SELECTOR SLOW /SEARCH SKIP STOP PAUSE PLAY SOUND MODE CHANNEL VOLUME MUTING SUBWOOFER ^ WAKE 8 INPUT SELECTOR ENHANCED HQ RE-MASTER SOUND MODE SURROUND DSP DOLBY SOURCE DIRECT SOUND MODE PRO LOGIC2 Operating Instructions MULTI DECODER DOLBY DOLBY DOLBY DTS-ES DIGITAL EX DIGITAL PRO LOGIC 2 NEO:6 DTS NEO:6 DOWN PHONES A SPEAKERS B INPUT DVD TAPE MODE 6CH INPUT MONITOR RDS - BAND – FM MODE MEMORY PRESET DISPLAY MODE PTY SEARCH UP Model No.
Caution for AC Mains Lead (For United Kingdom) Placement (“EB” area code model only) For your safety, please read the following text carefully. This appliance is supplied with a moulded three pin mains plug for your safety and convenience. A 5-ampere fuse is fitted in this plug. Should the fuse need to be replaced please ensure that the replacement fuse has a rating of 5-ampere and that it is approved by ASTA or BSI to BS1362. Check for the ASTA mark or the BSI mark on the body of the fuse.
¡DO NOT INSTALL, OR PLACE THIS UNIT, IN A BOOKCASE, BUILT-IN CABINET OR IN ANOTHER CONFINED SPACE. ENSURE THE UNIT IS WELL VENTILATED. TO PREVENT RISK OF ELECTRIC SHOCK OR FIRE HAZARD DUE TO OVERHEATING, ENSURE THAT CURTAINS AND ANY OTHER MATERIALS DO NOT OBSTRUCT THE VENTILATION VENTS. ¡DO NOT OBSTRUCT THE UNIT’S VENTILATION OPENINGS WITH NEWSPAPERS, TABLECLOTHS, CURTAINS, AND SIMILAR ITEMS. ¡DO NOT PLACE SOURCES OF NAKED FLAMES, SUCH AS LIGHTED CANDLES, ON THE UNIT.
Step Supplied accessories Please check and identify the supplied accessories. 1 AC mains lead For the United Kingdom For continental Europe 1 2 3 4 To connect equipment, refer to the appropriate operating instructions. Peripheral equipment and cables sold separately unless otherwise indicated.
Equipment connections TV and DVD player DVD player DVD/DVD 6CH OPTICAL1 OPTICAL2 OPTICAL3 OPTICAL4 COAXIAL (TV) IN (DVD) IN (DVR) IN (MD/CD-R/RW) IN IN L OPTICAL OUT L AUDIO OUT (FRONT L, R) CENTER R R SUBWOOFER SURROUND FRONT Before use DIGITAL AUDIO OUT (CENTER, SUBWOOFER) AUDIO OUT (SURROUND L, R) S-VIDEO OUT IN IN DIGITAL AUDIO OUT VIDEO OUT Step 1 Note Connect to FRONT L, R if your DVD player does not have 6 channel output.
Equipment connections Other audio visual equipment MD deck or CD recorder CD Player DIGITAL DVD recorder DIGITAL DIGITAL OPTICAL1 OPTICAL2 OPTICAL3 OPTICAL4 COAXIAL (TV) IN (DVD) IN (DVR) IN (MD/CD-R/RW) IN IN OPTICAL OUT OPTICAL1 OPTICAL2 OPTICAL3 OPTICAL4 COAXIAL (TV) IN (DVD) IN (DVR) IN (MD/CD-R/RW) IN IN DIGITAL OUT DIGITAL IN DIGITAL OUT OPTICAL1 OPTICAL2 OPTICAL3 OPTICAL4 COAXIAL (TV) IN (DVD) IN (DVR) IN (MD/CD-R/RW) IN IN OPTICAL OUT OPTICAL OUT DIGITAL AUDIO OUT DVR/VCR2 OUT S-VIDEO
Antennas FM outdoor antenna FM indoor antenna (included) Fix the other end of the antenna where reception is best. Adhesive tape DIGITAL OPTICAL1 OPTICAL2 OPTICAL3 OPTICAL4 COAXIAL (TV) IN (DVD) IN (DVR) IN (MD/CD-R/RW) IN IN FM ANT 75Ω AM loop antenna (included) OPTICAL OUT FM outdoor antenna DVD (ForTV IN the United Kingdom) Y Antenna plug P (included) PRE OUT IN FM ANT 75Ω SURROUND SUBWOOFER BACK L 75 Ω coaxial cable B LOOP Before use ¡Disconnect the FM indoor antenna.
Step 1 2 Speaker connections 3 4 Placement of speakers Front speakers ( FL left FR right) Place on the left and right of the TV at seated ear height so that there is good coherency between the picture and sound. SB SR SL Center speaker ( C ) Place underneath or above the center of the TV. Aim the speaker at the seating area. 45˚ 45˚ 45˚ 45˚ 30˚ Surround speakers ( left SL SR right) Place on the side of or slightly behind the seating area, about one meter higher than ear level.
Peripheral equipment and cables sold separately unless otherwise indicated. Connecting speakers Turn off the receiver before connecting the speakers. Right Center speaker – Impedance: 6–16 Ω Left FL FR If you connect speakers with an impedance under 6 Ω, switch on “LOW IMP” (\ page 12). A and B 8–16 Ω Speaker cables A FRONT Step 1 B C Speaker cable “B” terminals CENTER For connection to a second pair of speakers. Use the A terminals to enjoy SURROUND, SFC and DVD 6CH INPUT.
Step 1 2 3 4 Settings See page 21 to change the DIMMER, DR COMP and A/D ATT settings.
Change the settings to suit your speakers and units to the environment in which you are using them. Before making any changes, read the descriptions of the settings, note the factory settings and ranges, and refer to the equipment’s instructions. 4 D-INPUT Digital input 5 Adjusting speaker output level Adjust the level of the other speakers based on the output of the front speakers. (Speakers set as “NONE” or “NO” are skipped. Adjust the volume of the front speakers with [VOLUME].
Step 1 2 3 4 Control guide Main unit [ENHANCED SURROUND] For turning on the enhanced surround mode. The indicator lights when the mode is on. [HQ SOUND MODE] For selecting the HQ sound mode. The indicator lights when the mode is on. [RE-MASTER] For selecting a re-master mode. The indicator lights while a remaster mode is on. [SOURCE DIRECT] For selecting a source direct mode.
VOLUME INPUT SELECTOR S-ES DTS NEO:6 DOWN Light to indicate the source’s input signal and decoding format used. DOLBY DIGITAL EX: Dolby Digital Surround EX sources DOLBY DIGITAL: Dolby Digital sources DOLBY PRO LOGIC 2: Dolby Pro Logic 2 decoder is being used DTS-ES: DTS-ES discrete or matrix sources DTS: DTS sources NEO:6: DTS NEO:6 matrix decoder is being used Step 1 [MULTI DECODER] DER [VOLUME] UP Volume control.
Control guide Display [ATT] Lights when the A/D attenuator is working. [OVER] Lights when input exceeds rated values. Turn the A/D attenuator on if this occurs frequently (\ page 21). [kHz, MHz] Frequency unit indicators kHz: AM, or PCM sampling frequency MHz: FM [L, C, R, S, SL, SB, SR, LFE] [LOW IMP, SPEAKERS A , B ] Program format indicators Show the channels contained in the digital input signal. They do not light when input is analogue.
Remote control Buttons not explained on this page are used only to operate other equipment. Refer to the separate Remote Control Operation Guide for details. TUNER/BAND MD TAPE CD RECEIVER TOP MENU RETURN [MUTING] STOP PAUSE PLAY SOUND MODE CHANNEL VOLUME MUTING INPUT SELECTOR SUBWOOFER [CHANNEL, 1, 2] To enter radio frequencies and channels. [DIRECT TUNING/DISC] To enable selection of radio stations by frequency. [ENHANCED SURROUND] For turning on the enhanced surround mode.
Sound modes STEREO mode DSP SOUND MODE ENHANCED SURROUND L R DSP SOUND MODE SOURCE DIRECT SPEAKERS A INPUT MODE DIGITAL SOUND MODE STEREO VOLUME INPUT SELECTOR ^ WAKE 8 ENHANCED HQ RE-MASTER SOUND MODE SURROUND DSP DOLBY SOURCE DIRECT SOUND MODE PRO LOGIC2 MULTI DECODER DOLBY DOLBY DOLBY DTS-ES DIGITAL EX DIGITAL PRO LOGIC 2 NEO:6 DTS NEO:6 DOWN PHONES A SPEAKERS B INPUT DVD TAPE MODE 6CH INPUT MONITOR RDS - BAND – FM MODE MEMORY PRESET DISPLAY MODE PTY SEARCH UP Use this mode to pla
1 Press [EFFECT] to select “C-WDTH”. 2 Press [–/L] or [+/R] to adjust the effect. 2 Notes on using Dolby Pro Logic2 ENHANCED SURROUND turns off if you select a Dolby Pro Logic 2 mode. Dimension Control – DIMEN You can make up for differences in the output level of the front and surround speakers. You can choose a level between –3 and +3 – Increase the level to move sound to the front speakers, decrease to move it to the surround speakers. The default is level 0. 1 Press [EFFECT] to select “DIMEN”.
Other functions HQ sound mode HQ SOUND MODE HQ sound mode uses a system that varies the actual gain of the amplifier. This helps provide clear sound when listening at regular volume levels. RE-MASTER Press [HQ SOUND MODE].
The radio INPUT SELECTOR Direct tuning q Press [TUNER/BAND RECEIVER]. The band changes each time you press the button. e.g. To select 107.
RDS broadcasts PTY displays VOLUME INPUT SELECTOR ^ WAKE 8 ENHANCED HQ RE-MASTER SOUND MODE SURROUND DSP DOLBY SOURCE DIRECT SOUND MODE PRO LOGIC2 MULTI DECODER DOLBY DOLBY DOLBY DTS-ES DIGITAL EX DIGITAL PRO LOGIC 2 NEO:6 DTS NEO:6 DOWN PHONES INPUT DVD TAPE MODE 6CH INPUT MONITOR A SPEAKERS B RDS - BAND – FM MODE MEMORY PRESET DISPLAY MODE RDS - BAND – FM MODE MEMORY DISPLAY MODE PTY SEARCH UP VCR 3 2 TUNING 1 PTY SELECTOR S-VIDEO IN VIDEO IN PRESET 2 TUNING 1 PTY SEARCH PTY SELECTO
Other settings DIMMER – Dim the display for better viewing in a darkened room INPUT SELECTOR Press [DIMMER] on the remote control.
Timer function Making a recording INPUT SELECTOR 1 2 3 SOURCE DIRECT 4 5 6 INPUT MODE 8 9 DVD 6CH VOLUME ^ 7 ENHANCED HQ RE-MASTER SOUND MODE SURROUND WAKE 8 DSP DOLBY SOURCE DIRECT SOUND MODE PRO LOGIC2 INPUT SELECTOR VOLUME MULTI DECODER DOLBY DOLBY DOLBY DTS-ES DIGITAL EX DIGITAL PRO LOGIC 2 NEO:6 DTS INPUT SELECTOR NEO:6 DIRECT TUNING/ DISC 0 10/-/-- ENHANCED SURROUND RE-MASTER /L TIMER TIMER ^ DOWN PHONES INPUT DVD TAPE MODE 6CH INPUT MONITOR A SPEAKERS B - BAND D
Troubleshooting guide Before requesting service for this unit, check the chart below for a possible cause of the problem you are experiencing. Some simple checks or a minor adjustment on your part may eliminate the problem and restore proper operation. If you are in doubt about some of the check points, or if the remedies indicated in the chart do not solve the problem, consult your dealer for instructions. No sound. ¡Turn the volume up. ¡Check connections to speakers and other equipment.
Specifications (DIN 45 500) ■ AMPLIFIER SECTION ■ FM TUNER SECTION Power output Frequency range Sensitivity S/N 30 dB S/N 26 dB S/N 20 dB IHF usable sensitivity (IHF’58) IHF 46 dB stereo quieting sensitivity Total harmonic distortion MONO STEREO S/N MONO STEREO Frequency response 20 Hz–15 kHz Alternate channel selectivity ±400 kHz Capture ratio Image rejection at 98 MHz IF rejection at 98 MHz Spurious response rejection at 98 MHz AM suppression Stereo separation 1 kHz Carrier leak 19 kHz 38 kHz Channel b