Operating instructions
For your reference
In rare cases, the unit may have trouble recognizing the digital
signals on discs.
¡With the PCM signals on CDs, this may cause the beginning of a
track to be cut off. Engage the PCM FIX mode if this occurs.
¡With DTS, the signals may not be recognized at all. Engage the
DTS FIX mode if this occurs.
While the input source is selected:
11
Press [INPUT MODE] to select “DIGITAL”.
22
Press and hold [INPUT MODE].
The current mode is displayed. Press again to change the mode.
Each time you press the button:
AUTO / PCM FIX / DTS FIX
When a FIX mode is on, the unit cannot process other signals. This
may cause noise to be output. Select
“
AUTO
”
if this occurs.
The selected mode is stored for each input source even if the unit is
turned off.
16
RQT6252
Use this mode to play digital or analogue stereo sources or to
play surround sources through two speakers. When surround
sources are played in this mode, the sounds intended for the
other speaker channels are played through the front speakers.
Select this mode when you are playing a digital surround source
(Dolby Digital or DTS).
Also select this mode when playing analogue or digital stereo
sources. Dolby Pro Logic 2 decoder works not
only on sources recorded with Dolby Surround, but
also on any stereo source. The following modes
are available when using Dolby Pro Logic 2.
Enjoy an enhanced sound experience with greater presence and
spread by using these SFC (sound field control) modes with PCM
or analogue stereo sources.
The SFC modes cannot be used if the input signal
is Dolby Digital or DTS.
Choose from the following modes.
DOLBY
PRO LOGIC 2
SPEAKERS
INPUT MODE
DIGITAL
LR
SOUND MODE
STEREO
A
DSP
SOUND MODE
SPEAKERS
INPUT MODE
DIGITAL
LR
SOUND MODE
SFC
A
DSP
SOUND MODE
DOLBY
DIGITAL
DOLBY
PRO LOGIC 2
DTS-ESDOLBY
DIGITAL EX
RE-MASTER
WAKE
8
^
SOURCE DIRECT
NEO:6
DSP
SOUND MODE
DOLBY
PRO LOGIC 2
HQ
SOUND MODE
ENHANCED
SURROUND
DTS
MULTI DECODER
NEO:6
INPUT SELECTOR
VOLUME
DOWN UP
A SPEAKERS B
PHONES
RDS
- BAND
–
FM MODE
MEMORY
DISPLAY
MODE
PTY SEARCH PTY SELECTOR
PRESET
2
TUNING
1
INPUT
MODE
TAPE
MONITOR
DVD
6CH INPUT
VCR 3
S-VIDEO IN VIDEO IN
L AUDIO IN R
SOURCE DIRECT
INPUT
MODE
DSP
SOUND MODE
DOLBY
PRO LOGIC 2
NEO:6
ENHANCED
SURROUND
INPUT
SELECTOR
SUBWOOFER
3
6
2
5
1
4
987
0
DIRECT TUNING/
DISC
ENHANCED
SURROUND
DOLBY
PROLOGIC 2
SFC
RE-MASTER
TESTNEO:6
10/-/--
INPUT MODE
DVD 6CH
TIMER
LEVELEFFECT
/ L
/ R
TONE
BALANCE
DIMMER
SETUPPAG EAUDIO GROUP
DVD
TV/AV
TV VOL
SOURCD DIRECT
LEVEL
/ L
/ R
SFC
EFFECT
SURROUND mode
STEREO mode
SFC modes
ENHANCED SURROUND mode
SPEAKERS
INPUT MODE
DIGITAL
LCR
SL
SR LFE
SOUND MODE
SURROUND
A
DSP
SOUND MODE
This mode uses the surround back speaker to create a realistic
sound field. It is especially effective when playing DTS-ES and
Dolby Digital Surround EX, but can be used with other DTS and
Dolby Digital sources. This mode engages automatically if the
disc has a recognition signal for DTS-ES or Dolby Digital
Surround EX (you can still turn the mode off).
Use DTS NEO:6 to play 5.1-channel DTS, 2-channel PCM, and
analogue sources through 6.1 channels.
The following modes are available when playing
2-channel PCM and analogue sources.
NEO:6
SFC
Notes on using the Digital Signal Processor
The digital signal processor in this unit can decode the
following signals:
¡¡
Dolby Digital, including Dolby Digital Surround EX
¡¡
DTS, including DTS-ES
¡¡
PCM, including PCM with sampling frequencies of 96 or
88.2 kHz
It cannot decode:
¡Other digital signals, such as MPEG
¡Dolby Digital RF signals from a laser disc player
When playing PCM with sampling frequencies of 96 or 88.2 kHz,
the STEREO DSP mode is engaged automatically.
Use this mode to enjoy pure sound from digital and analogue
sources, unaltered by this unit’s DSP and other circuits.
Choose from the following modes.
SOUND MODE
STEREO
ANALOG
SPEAKERS
INPUT MODE
DIRECT 1
A
SOURCE DIRECT
SOURCE DIRECT modes
SOURCE DIRECT
Sound modes
SPEAKERS
INPUT MODE
DIGITAL
LCR
SL
SB SR LFE
SOUND MODE
SURROUND
A
ENHANCED
SURROUND
/