Operating instructions

Specifications (DIN 45 500)
To clean this unit, wipe with a soft, dry cloth.
¡Never use alcohol, paint thinner or benzine to clean this unit.
¡Before using chemically treated cloth, read the instructions that
came with the cloth carefully.
If the surfaces are dirty
Maintenance
■ AMPLIFIER SECTION
Power output (at 230 V for continental Europe)
(at 240 V for the United Kingdom)
DIN 1 kHz (T.H.D. 1 %) 2 × 100 W (6 Ω)
20 Hz–20 kHz continuous power output
both channels driven 2 × 80 W (6 Ω)
Total harmonic distortion
rated power at 20 Hz–20 kHz 0.05 % (6 Ω)
half power at 1 kHz 0.03 % (6 Ω)
Power output each channel driven
DIN 1 kHz (T.H.D. 1 %)
Front (L/R) 100 W (6 Ω)
Center 100 W (6 Ω)
Surround (L/R/BACK) 100 W (6 Ω)
Power bandwidth
both channels driven, –3 dB 10 Hz –100 kHz (6 Ω, 0.9 %)
Damping factor 45 (6 Ω)
Load impedance
Front (L/R)
A or B 4–16 Ω
A and B 8–16 Ω
Center 6–16 Ω
Surround (L/R/BACK) 6–16 Ω
Frequency response
PHONO RIAA standard curve (30 Hz–15 kHz) ±0.8 dB
CD, MD/CD-R/RW, TV, DVD/DVD 6CH, VCR 1, DVR/VCR 2,
VCR 3, TAPE 10 Hz–100 kHz, ±3 dB
Input sensitivity and impedance
PHONO 3 mV/47 kΩ
CD, MD/CD-R/RW, TV, DVD/DVD 6CH, VCR 1, DVR/VCR 2,
VCR 3, TAPE 200 mV/22 kΩ
S/N at rated power (6 Ω)
PHONO 70 dB (IHF, A: 80 dB)
CD, MD/CD-R/RW, TV, DVD/DVD 6CH, VCR 1, DVR/VCR 2,
VCR 3, TAPE 98 dB (IHF, A: 100 dB)
SOURCE DIRECT/HQ SOUND MODE
108 dB, IHF A/Rated Power/S=2 V
Tone controls
BASS 50 Hz, +10 to –10 dB
TREBLE 20 kHz, +10 to –10 dB
Output voltage
TAPE, MD/CD-R/RW, VCR 1, DVR/VCR 2 200 mV
Channel balance (250 Hz–6.3 kHz) ±1 dB
Channel separation 55 dB
Headphones output level and impedance 430 mV/330 Ω
Subwoofer frequency response (–6 dB) 7–200 Hz
■ FM TUNER SECTION
Frequency range 87.50–108.00 MHz
Sensitivity
S/N 30 dB 1.5 µV/75 Ω
S/N 26 dB 1.3 µV/75 Ω
S/N 20 dB 1.2 µV/75 Ω
IHF usable sensitivity (IHF’58) 1.5 µV/75 Ω
IHF 46 dB stereo quieting sensitivity 22 µV/75 Ω
Total harmonic distortion
MONO 0.2 %
STEREO 0.3 %
S/N
MONO 60 dB (75 dB, IHF)
STEREO 58 dB (71 dB, IHF)
Frequency response
20 Hz–15 kHz +1 dB, –2 dB
Alternate channel selectivity
±400 kHz 65 dB
Capture ratio 1.5 dB
Image rejection at 98 MHz 40 dB
IF rejection at 98 MHz 70 dB
Spurious response rejection at 98 MHz 70 dB
AM suppression 50 dB
Stereo separation
1 kHz 40 dB
Carrier leak
19 kHz –30 dB (–35 dB, IHF)
38 kHz –50 dB (–55 dB, IHF)
Channel balance (250 Hz–6.3 kHz) ±1.5 dB
Limiting point 1.2 µV
Bandwidth
IF amplifier 180 kHz
FM demodulator 1000 kHz
Antenna terminal 75 Ω (unbalanced)
■ AM TUNER SECTION
Frequency range 522–1611 kHz (9 kHz steps)
530–1620 kHz (10 kHz steps)
Sensitivity 20 µV, 330 µV/m
Selectivity 55 dB
IF rejection 50 dB
■ VIDEO SECTION
Output voltage at 1 V input (unbalanced) 1±0.1 Vp-p
Maximum input voltage 1.5 Vp-p
Input/output impedance 75 Ω (unbalanced)
S-VIDEO input DVD/DVD 6CH, VCR 1, DVR/VCR 2, VCR 3, TV
S-VIDEO output VCR 1, DVR/VCR 2, TV MONITOR
■ GENERAL
Power supply
For continental Europe AC 230 V, 50 Hz
For the United Kingdom AC 230–240 V, 50 Hz
Power consumption 280 W
Dimensions (W × H × D) 430 × 158 × 377 mm
Mass 11.9 kg
Power consumption in standby mode: 2 W
Note:
1. Specifications are subject to change without notice.
Mass and dimensions are approximate.
2. Total harmonic distortion is measured by the digital spectrum
analyzer.
Digital input (OPTICAL) 4
(COAXIAL) 1
Digital output (OPTICAL) 1
En
RQT6252-B
H0402HM0
Matsushita Electric Industrial Co., Ltd.
Web Site: http://www.panasonic.co.jp/global/