Manual

®
AM loop
"" antenna
Black (-)
Gray (+) Blue (-)
J
oPlug the AC power cord into a household AC outlet only after all
other connections have been made.
eTo prepare the AM loop antenna, the FM antenna wir_eand speak-
er cords, twist the vinyl cover tip and pull off.
O Connect the FM indoor antenna.
Tape the antenna to a wall or column, in a position where radio
signals are received with the least amount of interference.
E!
Forbest reception soundquality:
An FM outdoorantennais recommended.(See page7.)
Connect the AM loop antenna.
After attaching the antenna, turn on the system and tune in a
broadcast station. Then, turn the antenna to the angle of best
reception and least interference.
Connect the speaker cables.
Connect each end of the speaker cables to the terminal lever
of the same color.
When speakers are connected to the low and high termi-
nals on the back of the main unit
They are designed to have a combined impedance of 6Q.
Be sure to use only the speakers supplied,
impedance
HIGH LOW
6Q
Combined
Impedance
t I _- Frequency
100 Hz 1 kHz
• Never use speakers other than those supplied. For instance,
it you connect speakers with an impedance of 6Q each and
plug them into the low and high terminals, you will only have
a combined impedance of 3_.
oTo prevent damage to cimuitry, never short-circuit positive
(+) and negative (-) speaker wires.
Connect the AC power cord.