Manual

Automatic input switching
When the following operations are performed, the TV will
automatically switch the input channel and display the
corresponding action.
-When play starts on the unit
-When an action that uses the display screen is performed
(e.g., Direct Navigator screen)
eWhen you switch the TV input to TV tuner mode, this unit will
automatically switch to "AUX ''.1, "D-IN 1" (DIGITAL IN 1),1 or "D-IN
2" (DIGITAL IN 2) .2.
eThis function does not work when the iPod selector (SIMPLE
mode) or iPod Video menu (EXTENDED mode) is chosen. (_, 31 )
•When [I_PLAY] is pressed, the playback image is not
immediately displayed on the screen and it may not be
possible to watch the contents from where playback
NOTE started.
In this case. press [SKIP _14] or [SEARCH44] to go back
to where playback started.
Automatic lip-sync function
(for HDAVI Control 3 or later}
Delay between audio and video is automatically adjusted, enabling
you to enjoy smooth audio for the picture. (_ 39, Time Delay)
eThis function works only when "BD/DVD", "SD", "AUX ''.1, "D-IN 1"
(DIGITAL IN 1),1 or "D-IN 2" (DIGITAL IN 2) *2 is selected as the
source on this unit.
Power off link ........
All connected equipment compatible with "HDAVI Control", including
this unit, automatically turns off when you switch the TV off.
eThis unit automatically turns off even during playback or any other
operation.
To continue audio playback even when the TV is turned off,
select "Video" in "Power Off Link". (:_ 39)
• Auto power stand-by
Auto power stand-by responsibly manages your power
consumption.
This function is available with a TV that supports "HDAVI Control 4".
• If connected with a TV (VIERA) with the "Auto power stand-by"
setting activated on the TV, when switching the TV input, the unit
will be automatically turned to standby. For details please read the
operating instructions of the TV.
-When "Speaker control" is set to "Home theater", the main unit
will not automatically turn to standby.
"1 "AUX'! or i:D:iN 1!' Works depending On the 'iTV AUDIO:' settingl
(=> 28 Sett ng the TV aud o for V ERA L nk "HDAV Contro ")
*2 "D-IN 2" works depending on the !'CABLE/SAT AUDIO!! setting:
(_ 28, Setting the TV audio for VlERA Link "HDAVI Control'!)
Easy control only with VIERA remote
control
If you connect this unit to a TV that has "HDAVI Control 2" or later with
an HDMI cable, you can operate this unit using buttons on the TV
remote control.
The buttons that you can use for this unit vary, depending on the TV.
For details, refer to the operating instructions of the TV.
Use the remote control supplied with this unit if you cannot operate this
unit using buttons on the TV remote control.
• The operation of this unit may be interrupted when you press
incompatible buttons on the TV remote control.
By using the TV remote control, you can play media using the
START menu.
O Press the button for VIERA Link
on the TV remote control.
i_ Select the home theater.
• The START menu is displayed
_) Select the desired items on the
START menu (_ 16).
e.g.,rclz_
Playback DISC
Using the sub menu to operate this unit
By using the TV remote control, you can play discs using the
"Control Panel" and display the Top Menu (for BD-Video and
DVD-Video) or Pop-up Menu (for BD-Video).
• This works only during "BD/DVD" or "SD" playback and resume modes.
O Press [SUB MENU]. e.g., r_
• You cannot use the sub menu while the Top
Menu for BD-Video or DVD-Video is displayed.
• This can also be displayed by using the
VIERA menu screen.
Select an item, then press [OK].
Control Panel Control Panel is displayed. Followthe
indications on the screen. (_ below)
Screen Aspect (_ 21 )
Top Menu _ _ _ Top menu is displayed.
Menu _ Menu is displayed.
Pop-up Menu _ Pop-up menu is displayed.
Rotate Right _ Rotate the still picture.
Rotate Left
Zoom in lrFJ'=l_ Enlarge or shrink the still picture.
Zoom out
• Using the Control Panel
You can operate the playback with the indicated controls.
e.g.
=Depending onthe menu; some button operations cannot
[_,,._ be performed from the -I-V_sremote control.
_-----_ =You cannot input numbers with the numbered buttons on
NOT E the TV's remote control ([0] to [9]), Use this unit's remote
control to select the playlist etc.
• When you want to leave the TV on and set only this unit to standby mode
Press [_] on this unit's remotecontrol and set to standby mode.
• When not using "HDAVl Control"
Set"VIERA Link" in the Setup menuto "Off". (_ 39)
RQT9371