Manual

Messages
On the unit's display (continued)
"_" is flashing.
(when using the optional wireless
accessory: SH-FX70)
U59
U72
U73
HC]C]or FC]C]
(" [] " stands for a number.)
oThere is no link between this unit and the wireless system. Check that the wireless system
is plugged into the household AC outlet and is turned on.
Ensure that the digital transmitter is fully inserted into the slot of this unit.
If the wireless system is not used, disconnect the digital transmitter from this unit.
The unit is hot.
The unit switches to standby for safety reasons. Wait for about 30 minutes until the
message disappears.
Select a position with good ventilation when installing the unit. Do not block the cooling fan
on the rear of the unit.
The HDMI connection acts unusually.
-The connected equipment is not HDMI compatible.
-Please use HDMI cables that have the HDMI logo (as shown on the cover).
-The HDMI cable is damaged.
Check and correct the speaker cable connections.
There is something unusual. (The service number displayed after H and F depends on the
unit's condition.)
Check the unit using the troubleshooting guide. If the service number does not disappear,
do the following:
1 Disconnect the plug from the household AC outlet wait a few seconds, then reconnect
it.
2 Press [POWER (b/I] to turn the power on. (The unit may be fixed.)
If the service number does not disappear despite doing the above, request service from
the dealer. Inform the dealer of the service number when requesting service.
Page
45
The main unit could not save the modified settings. Some settings may need to be reset.
45
9
IPOD OVER CURRENT ERROR •The iPod is drawing too much power. Remove the iPod, and turn the unit off and on again.
START •The system is being restarted during the firmware update. Please do not turn off power. 32
UPDC]/C] •The firmware is being updated. 32
FINISH •The firmware update is complete. 32
NOT CONDITIONAL •The requested operation cannot be conducted.
Frequently asked questions
47 to 50
Setup Page
Can I connect other speakers? •Speakers other than those supplied cannot be used. This system achieves ideal audio
properties through the combination of the main unit and the supplied speakers. Using
other speakers may damage the system and will not produce correct audio characteristics
(e.g., no bass sounds).
Disc
Can I play BD-Video and DVD-Video
bought in another country?
You can play them if the video standard is NTSC; however you cannot play:
-BD-Video discs that do not include region "A'.
-DVD-Video discs that do not include region "1" or "ALL".
Refer to the disc's jacket for more information.
Cover
Please tell me about disc compatibility Refer to "Disc and card information" and "About MP3/JPEG files".
with this unit. •You cannot write to a disc with this unit.
SD card
What kinds of operations are available
on the SD card slot on this unit?
The following operations are available.
-Play back JPEG data recorded with a digital camera etc.
-Play back AVCHD motion pictures recorded with Panasonic High Definition Video
Camera
-Play back MPEG-2 motion pictures recorded with Panasonic Standard Definition Video
Camera
If a BD-Video disc supporting BD-Live or BONUSVlEW is used, it is possible to copy
secondary video, etc. from the Internet or disc to the card and play it back together with
the images on the disc, etc.
m
m
m
22
RQT9371