Operation Manual
Table Of Contents
- TABLE OF CONTENTS
- Getting started
- Accessories
- IMPORTANT SAFETY INSTRUCTIONS
- Control reference guide (remote control)
- Preparing the remote control
- Control reference guide (main unit)
- Assembling the speakers
- Positioning
- Speaker connections
- TV connections
- Connections to a Set Top Box, etc
- Radio antenna connections
- Broadband Network Connections
- AC power supply cord connection
- SMART SETUP / EASY SETUP
- Showing START menu
- Selecting the playback source
- Enjoying sound from all speakers and various sound effects
- Playback
- Radio
- TV
- Other devices
- Advanced operations
- Optional speaker settings
- Reference
![](/manual/panasonic/sc-bt300/operation-manual-english/images/img-46.png)
46
RQT9508
Speaker installation options
You can attach all of the speakers (except subwoofer) to a wall.
≥The wall or pillar on which the speakers are to be attached should be
capable of supporting 10 kg (22 lbs) per screw. Consult a qualified
building contractor when attaching the speakers to a wall. Improper
attachment may result in damage to the wall and speakers.
Attaching to a wall
1 Drive a screw (not included) into the wall.
2 Fit the speaker securely onto the screw(s) with the hole(s).
4.0 mm (
5
/
32
)
7.5 mm to 9.4 mm
(
19
/
64
to
3
/
8
)
At least 30 mm (1
3
/
16
)
3 mm to 5 mm (
1
/
8
to
3
/
16
)
Wall or pillar
DO
NOT
DO
Front ([BT300], [BT303]) speaker
Attach to a wall without the base and the stand
72 mm
(2
27
/
32
)
348.5 mm
(13
23
/
32
)
In this position,
the speaker will
likely fall if
moved to the
left or right.
Move the
speaker so that
the screw is in
this position.
Reattaching the speaker cables [BT300] \BT303\
Center speaker
190 mm
(7
15
/
32
)
Front ([BT200], [BT203]), surround
and surround back speakers
Insert the cable
from the bottom.
Pull out the cable
through the hole.
Leave about
120 mm
(4
23
/
32
)
Optional speaker
settings
BT300.book 46 ページ 2009年6月12日 金曜日 午後12時13分