Operation Manual

14
RQT7035
Disc operations
Discs—Basic play
[RAM] [DVD-A] [DVD-V] [VCD] [CD] [WMA] [MP3] [JPEG]
Memorize positions on up to five discs to restart play after switching
the unit to standby, change the source or changing discs.
1 During play, press [P.MEMORY].
2 Press [Í] to switch the unit to standby, change the source or
press [<] to remove the disc.
3 Press [1] (play) to restart from the position.
DVD-Video: Press [1] (play) again to review chapters (➡ below).
≥When you memorize the sixth position, the earliest position is
replaced.
≥This function does not work while playing some DVDs or play lists
on DVD-RAM.
This message appears.
Press [1] (play) again to review the first few seconds of the chapters
up to the one where you memorized the position. Play then resumes
from the memorized position.
Do not press [1] (play) if you do not want to review chapters.
[DVD-A] [DVD-V] [VCD]
Press the numbered buttons to select an
item.
To select a 2-digit number
Example: To select item 23, press [S10/-/--] ➡ [2] ➡ [3].
≥When playing DVDs, you can also use [3, 4, 2, 1] to select
items. Press [ENTER] to confirm your selection.
To return to the menu screen
[DVD-A] [DVD-V] [TOP MENU]: Shows the first menu screen.
[DVD-V] [MENU]: Shows the menu screen.
[VCD] [RETURN]: Shows the menu screen.
[Note]
The disc continues to rotate while the menu is displayed even after
you finish playing an item. Press [∫] when you finish to preserve the
unit’s motor and your television screen.
[RAM] [DVD-A] [DVD-V] [VCD] [CD] [WMA] [MP3] [JPEG]
During play or while paused
Press [:] or [9].
≥Each press increases the number of skips.
[JPEG]
Press [3] or [4] for group skip.
[RAM] [DVD-A] [DVD-V] [VCD] [CD] [WMA] [MP3]
During play
Press [6] or [5].
≥Audio will be heard during search for most discs. You can turn this
audio off if you want to (➡ page 29, Audio—Audio during Search).
≥[DVD-V] You can slow down or speed up play (➡ page 22).
[RAM] [DVD-V] [VCD]
[DVD-A] (Motion picture parts only)
While paused
Press [6] or [5].
[RAM] [DVD-V] [VCD]
[DVD-A] (Motion picture parts only)
While paused
Press [2] or [1].
The frame changes each time you press the button.
≥The frames change in succession if you press and hold the button.
≥Pressing [;] also activates forward frame-by-frame.
Position Memory function
Chapter Review [DVD-V]
<
;1
<
;
∫
1
SLOW/SEARCH
MENU/
PLAY LIST
TOP MENU/
DIRECT
NAVIGATOR
ENTER
DISPLAY
AUDIO ONLY
FL DISPLAY
PLAY MODE
REPEAT
D.RE-MASTER
S.SRND
SFC
PL
SUBWOOFER
LEVEL
CENTER
FOCUS
CANCEL
P.MEMORY
GROUP
TIMER
RETURN
X
TUNER/BAND
AV SYSTEM
VCR TV TV/AV
RDS
W
123
456
78
0
S10/-/--
9
DVD/CD
SKIP
Í
SKIP
:, 9
XW
TOP MENU
3, 4, 2, 1
ENTER
P.MEMORY
SLOW/SEARCH
6, 5
;
∫
1
MENU
RETURN
Numbered
buttons
Position memorized
Flashes as you memorize a
position.
Press PLAY to Chapter Review
When a menu appears on the television
Skipping items
Fast forward and rewind—SEARCH
Slow-motion play
Frame-by-frame viewing
Notes
≥The speed of search and slow-motion increases up to 5 steps.
≥Press [1] (play) to restart play.
≥You cannot move backwards with Video CD during frame-by-
frame and slow-motion.
When playing Video CDs with playback control
Pressing buttons to perform skip, search or slow-motion may
take you to a menu screen.