Operation Manual

17
RQT7035
Disc operations
≥“–” or “––” is displayed instead of the language number in
circumstances such as when no language is recorded on the disc.
[VCD] (SVCD only)
Soundtrack and subtitle numbers may change even if corresponding
soundtracks are not recorded.
[RAM] [DVD-A] [DVD-V] [VCD]
(Discs with multiple soundtracks)
1 During play
Press [DISPLAY] until the disc
information screen is displayed.
2 Press [2, 1] to select “Audio
Number”.
3 Press [3, 4] to select the audio
language.
≥You can also use this operation to turn the vocals on and off on
karaoke discs. Read the disc’s instructions for details.
[DVD-A]
≥Play restarts from the beginning of the soundtrack when changing
soundtracks that are accompanied by still pictures.
≥Even if a second soundtrack isn’t recorded, two soundtrack
numbers will normally appear in the soundtrack display. The
soundtrack currently playing is number 1.
Signal type/data
LPCM/PPCM/ÎDigital/DTS/MPEG: Signal type
k (kHz): Sampling frequency
b (bit): Number of bits ch (channel): Number of channels
Example:
3
/2 .1ch
[DVD-A] (Motion picture parts only)
[DVD-V]
[VCD] (SVCD only)
(Discs with multiple subtitle languages)
You can change the subtitle language and turn the subtitles on and
off.
[RAM]
You can turn the subtitles on and off.
1 During play
Press [DISPLAY] until the disc
information screen is displayed.
2 Press [2, 1] to select “Subtitle
Number”.
3 Press [3, 4] to select the language.
≥In some cases, the subtitle language is not changed to the
selected one immediately.
≥Refer to “Audio/Subtitle language” (➡ page 23) for language
abbreviations.
To clear/display the subtitles
1Press [2, 1] to highlight the following icon.
2Press [3, 4] to select “OFF” or “ON”.
∫ Changing the position and brightness of the
subtitles (➡ page 24)
Soundtracks
.1: Low frequency effect
(not displayed if there is no signal)
0: No surround
1: Mono surround
2: Stereo surround (left/right)
1: Center
2: Front leftiFront right
3: Front leftiFront rightiCenter
2 2 1 : 46 : 50
Digital
1 ENG 3/2.1 ch
ON
1 ENG
1
Audio Number
Digital
Î
1 ENG 3/2.1 ch
192k24b 2ch
LPCM
1
1
Soundtrack selected
Soundtrack playing
Audio language
(➡ page 23)
Number of
channels
(➡ below)
Signal type/data
(➡ below)
[DVD-A]
[DVD-V]
LR>L )R
[RAM] [VCD]
Subtitles
2 2 1 : 46 : 50
Digital
1 ENG 3/2.1 ch
ON
1 ENG
1
Subtitle Number
ON
1 ENG
ON
1 ENG
ON
2 FRA
OFF
1 ENG
OFF
[DVD-A] [DVD-V] [VCD]
[RAM]