SC-HC302.300.GN.GS TQBJ2074 En_rev1.fm Page 1 Friday, March 23, 2018 9:59 AM Operating Instructions Compact Stereo System Model No. SC-HC302 SC-HC300 This illustration shows SC-HC302. Thank you for purchasing this product. For optimum performance and safety, please read these instructions carefully. Please keep this manual for future reference.
SC-HC302.300.GN.GS TQBJ2074 En_rev1.fm Page 2 Friday, March 23, 2018 9:59 AM These operating instructions are applicable for models SC-HC302 and SC-HC300. [HC302]: Indicate features applicable to SC-HC302. [HC300]: Indicate features applicable to SC-HC300. Safety precautions Unless otherwise indicated, illustrations in these operating instructions are of SC-HC302. Your system and the illustrations can look differently.
SC-HC302.300.GN.GS TQBJ2074 En_rev1.fm Page 3 Friday, March 23, 2018 9:59 AM Note on AC mains lead Supplied accessories (For the AC mains plug of three pins) Check and identify the supplied accessories. For your safety, please read the following text carefully. Before use Remove the connector cover. 1 AC mains lead How to replace the fuse The location of the fuse differ according to the type of AC mains plug (figures A and B). Confirm the AC mains plug fitted and follow the instructions below.
SC-HC302.300.GN.GS TQBJ2074 En_rev1.fm Page 4 Friday, March 23, 2018 9:59 AM Making the connections Connect the AC mains lead only after all the other connections have been made. [HC302] [HC300] 2 Connect the AC mains lead. To household mains socket Do not use any other AC mains lead except the supplied one. Conserving power The system consumes a small amount of power (~17) even when it is in standby mode. Disconnect the power supply if you do not use the system.
SC-HC302.300.GN.GS TQBJ2074 En_rev1.fm Page 5 Friday, March 23, 2018 9:59 AM Overview of controls Do the procedures with the remote control. You can also use the buttons on the main unit if they are the same. Top view A Standby/on switch [`], [1] J Mute the sound Press to switch the unit from on to standby mode or vice versa. In standby mode, the unit is still consuming a small amount of power. B Select the audio source On the remote control: Press the corresponding button to select the source.
SC-HC302.300.GN.GS TQBJ2074 En_rev1.fm Page 6 Friday, March 23, 2018 9:59 AM Preparing the media Disc 1 2 Press [USB/CD] to select “CD”. Press [CD x] (main unit: [x]) to open the sliding door. Put in a disc with the label facing towards you. Bluetooth® You can connect and play an audio device wirelessly through Bluetooth®. Preparation • Switch on the Bluetooth® feature of the device and put the device near the system. • Read the operating instructions of the device for details.
SC-HC302.300.GN.GS TQBJ2074 En_rev1.fm Page 7 Friday, March 23, 2018 9:59 AM █ Disconnecting a device 3 Press [ ] to select “BLUETOOTH”. Press [PLAY MENU] repeatedly to select “DISCONNECT?”. Press [R, T] to select “OK? YES” and then press [OK]. Note: A device is disconnected when you: • Select a different source. • Move the device out of the maximum range. • Disable the Bluetooth® transmission of the device. • Switch off the system or the device.
SC-HC302.300.GN.GS TQBJ2074 En_rev1.fm Page 8 Friday, March 23, 2018 9:59 AM █ Note on disc Play menu CD USB 1 2 Press [PLAY MENU] repeatedly to select “PLAYMODE” or “REPEAT”. Press [R, T] to select the setting and then press [OK]. PLAYMODE Cancel the setting. 1-TRACK Play one selected track. Press [2/3] or [5/6] to select the track. • This system does not guarantee connection with all USB devices. • This system supports USB 2.0 full speed. • This system can support USB devices of up to 32 GB.
SC-HC302.300.GN.GS TQBJ2074 En_rev1.fm Page 9 Friday, March 23, 2018 9:59 AM █ Selecting a preset station Radio 1 Press [RADIO/AUX] to select “FM”. Manual tuning 1 2 3 Press [PLAY MENU] repeatedly to select “TUNE MODE”. Press [R, T] to select “MANUAL” and then press [OK]. Press [2/3] or [5/6] to tune in to the station. To tune automatically, press and hold the button until the frequency starts changing quickly. “STEREO” is shown when a stereo broadcast is being received.
SC-HC302.300.GN.GS TQBJ2074 En_rev1.fm Page 10 Friday, March 23, 2018 9:59 AM DAB/DAB+ [HC302] Preparation Press [RADIO/AUX] to select “DAB+”. Note: If you select “DAB+” for the first time, the system will tune automatically. Manual tuning 1 2 Press [PLAY MENU] repeatedly to select “MANUAL SCAN”. Press [R, T] to select the frequency block and then press [OK]. If no station is detected, “SCAN FAILED” is shown. Adjust the antenna and try again.
SC-HC302.300.GN.GS TQBJ2074 En_rev1.fm Page 11 Friday, March 23, 2018 9:59 AM Setting the clock This is a 24-hour clock. 1 2 Press [SETUP] repeatedly to select “CLOCK”. Press [R, T] to set the time and then press [OK]. To check the time Press [SETUP] repeatedly to select “CLOCK” and then press [OK]. In standby mode, press [DISPLAY]. Note: Reset the clock regularly to maintain accuracy. Sleep timer The sleep timer switches off the system after the set time.
SC-HC302.300.GN.GS TQBJ2074 En_rev1.fm Page 12 Friday, March 23, 2018 9:59 AM Sound effects External music device 1 You can play music from an external music device. 2 Press [SOUND] repeatedly to select the sound effect. Press [R, T] to select the setting and then press [OK]. MY SOUND “SOUND 1”, “SOUND 2” or “SOUND 3” (~below) PRESET EQ “HEAVY”, “SOFT”, “CLEAR”, “VOCAL” or “FLAT” BASS –4 to +4 TREBLE –4 to +4 D.BASS “ON D.BASS” or “OFF D.
SC-HC302.300.GN.GS TQBJ2074 En_rev1.fm Page 13 Friday, March 23, 2018 9:59 AM Others Auto off This system automatically switches off when you do not use it for approximately 20 minutes. 1 2 Software update Occasionally, Panasonic may release updated software for this unit that may add or improve the way a feature operates. These updates are available free of charge. For more details, refer to the following website. http://panasonic.jp/support/global/cs/ (This site is in English only.
SC-HC302.300.GN.GS TQBJ2074 En_rev1.fm Page 14 Friday, March 23, 2018 9:59 AM Troubleshooting Before requesting service, make the following checks. If you are in doubt about some of the check points, or if the solutions indicated do not solve the problem, consult your dealer for instructions. █ Common problems The unit cannot be switched on. • Connect the AC mains lead and wait for a minimum of 10 seconds before switching on the unit. The unit does not work. • The safety device has been activated.
SC-HC302.300.GN.GS TQBJ2074 En_rev1.fm Page 15 Friday, March 23, 2018 9:59 AM █ Main unit displays “REMOTE 1” “REMOTE 2” “--:--” • You connected the AC mains lead for the first time or there was a power failure recently. Set the clock. • The remote control and the main unit are using different “ADJUST CLOCK” • The clock is not set. Adjust the clock. “ADJUST TIMER” • The play timer is not set. Adjust the play timer.
SC-HC302.300.GN.GS TQBJ2074 En_rev1.fm Page 16 Friday, March 23, 2018 9:59 AM Remote control code System memory reset When other Panasonic equipment responds to the remote control of this system, change the remote control code for this system. Reset the memory when the following situations occur: • There is no response when buttons are pressed. • You want to clear and reset the memory contents. Preparation Press [USB/CD] to select “CD”.
SC-HC302.300.GN.GS TQBJ2074 En_rev1.fm Page 17 Friday, March 23, 2018 9:59 AM Specifications █ General Power supply [HC302] [HC300] █ USB section USB port power AC 220 V to 240 V, 50 Hz AC 110 V to 240 V, 50/60 Hz 14 21 W Power consumption Power consumption in standby mode 1 (approximate) With “BLUETOOTH STANDBY” set to “OFF” With “BLUETOOTH STANDBY” set to “ON” Dimensions (W x H x D) 0.2 W 0.3 W 409 mm x 198 mm x 107 mm Mass Operating temperature range 2.
SC-HC302.300.GN.GS TQBJ2074 En_rev1.fm Page 18 Friday, March 23, 2018 9:59 AM References About Bluetooth® Panasonic cannot be held responsible for data and/or information that is compromised during a wireless transmission. Frequency band • This system uses the 2.4 GHz frequency band. Certification • This system conforms to the frequency restrictions and has received certification based on frequency laws. Thus, a wireless permit is not necessary.
SC-HC302.300.GN.GS TQBJ2074 En_rev1.fm Page 19 Friday, March 23, 2018 9:59 AM Limited Warranty (For Australia only) Panasonic Warranty 1. Subject to the conditions of this warranty Panasonic or its Authorised Service Centre will perform necessary service on the product, without charge for parts or labour, if in the opinion of Panasonic the product is found to have a manufacturing defect within one (1) year or (12 months) (the “warranty period”) from the date of purchase appearing on your purchase receipt.
SC-HC302.300.GN.GS TQBJ2074 En_rev1.fm Page 20 Friday, March 23, 2018 9:59 AM Panasonic Corporation Web Site: http://www.panasonic.
