Application Guide

TQBS0397

Control reference guide

1 LED indicators

The currently-selected device is indicated by the

lighting of the corresponding indicator.

2 Standby/on switch (Í/I)

Press to switch the unit from on to standby mode

or vice versa. In standby mode, the unit is still

consuming a small amount of power.

3 Adjust the volume of this system (> 5)

4[INPUT/j PAIRING] button

• Selects the connected device

(The device changes each time this button is

pressed)

• Registers Bluetooth

devices

5 Remote control signal sensor

1 DC IN (19.5 V) terminal

2 Firmware update

(FOR UPDATE 5 V 500 mA) terminal*

3 OPTICAL DIGITAL AUDIO IN (TV) terminal

4 Ventilation holes

5 HDMI AV OUT (TV (ARC)) terminal

6 HDMI AV IN (GAME/AV) terminal

This system (Front / Sides)

A (Bluetooth

) indicator (lights up blue)

B CLR DIALOG indicator (lights up green)

C 3D SRND indicator (lights up green)

D GN-GAME/AV OR-TV indicator

– TV: lights up orange (OR)

– GAME/AV: lights up green (GN)

Distance: Within approx. 7 m (23 ft) directly in front

Angle: Approx. 20e up and down and approx.

30e left and right

This system (Rear)

1 2 43

* Note about firmware updates

Use the firmware update terminal to update the version of this system through a USB memory device. (Not used for

normal operations.) For more details about version updates, refer to the support site below.

https://panasonic.jp/support/global/cs/

(This site is in English only.)

SC-HTB01_PP_TQBS0397_eng.book 4 ページ２０２０年６月２５日　木曜日　午前９時３７分