Application Guide

8
TQBS0397
Bluetooth
®
connection
By using the Bluetooth
®
connection, you can listen
to the sound from the Bluetooth
®
audio device
from this system wirelessly.
• Refer to the operating instructions of the Bluetooth
®
device
for further instruction on how to connect a Bluetooth
®
device.
Preparation
• Turn on the Bluetooth
®
feature of the device and
place the device near this system.
1 Press [ ] to select “ ”.
• If the “ ” indicator flashes quickly, go to step 3.
2 Press and hold [ ] until the “ ”
indicator flashes quickly.
• If the “ ” indicator flashes slowly, repeat step
2.
3 Select “SOUNDSLAYER” from the
Bluetooth
®
device’s Bluetooth
®
menu.
• If prompted for the passkey on the Bluetooth
®
device, enter “0000”.
• Once the Bluetooth
®
device is connected, the
“ ” indicator stops flashing and lights up.
• You can register up to 8 devices with this system. If a 9th
device is paired, the device that has not been used for the
longest time will be replaced.
1 Press [ ] to select “ ”.
• If the “ ” indicator lights, a Bluetooth
®
device is
already connected with this system. Disconnect
it. (> below)
2 Select “SOUNDSLAYER” from the
Bluetooth
®
device’s Bluetooth
®
menu.
∫ Disconnecting a Bluetooth
®
device
Press and hold [ ] until the “ ” indicator flashes.
• This system can only be connected to one device at a time.
About Bluetooth
®
∫ Frequency band used
This system uses the 2.4 GHz frequency band.
∫ Certification of this device
• This system conforms to frequency restrictions and has
received certification based on frequency laws. Thus, a
wireless permit is not necessary.
• The action below are punishable by law in some countries:
– Taking apart or modifying the unit.
– Removing specification indications.
∫ Restrictions of use
• Wireless transmission and/or usage with all Bluetooth
®
equipped devices is not guaranteed.
• All devices must conform to standards set by Bluetooth SIG, Inc.
• Depending on the specifications and settings of a device, it
can fail to connect or some operations can be different.
• This system supports Bluetooth
®
security features. But
depending on the operating environment and/or settings,
this security is possibly not sufficient. Transmit data
wirelessly to this system with caution.
• This system cannot transmit data to a Bluetooth
®
device.
∫ Range of use
Use this device at a maximum range of 10 m (33 ft).
The range can decrease depending on the environment,
obstacles or interference.
∫ Interference from other devices
• This system may not function properly and troubles such as
noise and sound jumps may arise due to radio wave
interference if this system is located too close to other
Bluetooth
®
devices or the devices that use the 2.4 GHz band.
• This system may not function properly if radio waves
from a nearby broadcasting station, etc. are too strong.
∫ Intended usage
• This system is for normal, general use only.
• Do not use this system near equipment or in an environment
that is sensitive to radio frequency interference (example:
airports, hospitals, laboratories, etc).
Troubleshooting
Before requesting service, make the following checks.
If you are in doubt about some of the check points, or
if the solutions indicated in the following guide do not
solve the problem, consult your dealer for instructions.
• More detailed operating instructions are available in
“Owner’s Manual (PDF format)”. (> cover)
Bluetooth
®
pairing
Connecting a paired Bluetooth
®
device
Panasonic bears no responsibility for data and/or information
that is compromised during a wireless transmission.
To return to the factory defaults.
While this system is on, press and hold [Í/I] on this
system for more than 4 sec. (All the indicators will
blink twice when this system is reset.)
For further dedicated help, support and
advice about this system please visit:
https://panasonic.jp/support/global/cs/
(This site is in English only.)
SC-HTB01_PP_TQBS0397_eng.book 8 ページ ２０２０年６月２５日 木曜日 午前９時３７分