HTB170EGEBGN~Cover_mst.fm 1 ページ ２０１３年７月３日 水曜日 午後６時１９分 Operating Instructions Home Theater Audio System Model No. SC-HTB170 Thank you for purchasing this product. Please read these instructions carefully before using this product, and save this manual for future use. Included Installation Instructions The installation work should be done by a qualified installation specialist.
SC-HTB170EGEBGN_RQT9772-B.book 2 ページ ２０１３年２月４日 月曜日 午前９時５分 Safety precautions WARNING CAUTION Unit Unit ≥ To reduce the risk of fire, electric shock or product damage, jDo not expose this unit to rain, moisture, dripping or splashing. jDo not place objects filled with liquids, such as vases, on this unit. jUse only the recommended accessories. jDo not remove covers. jDo not repair this unit by yourself. Refer servicing to qualified service personnel.
ページ ２０１３年２月４日 Caution for AC Mains Lead (For the AC mains plug of three pins) For your safety, please read the following text carefully. This appliance is supplied with a moulded three pin mains plug for your safety and convenience. A 5-ampere fuse is fitted in this plug. Should the fuse need to be replaced please ensure that the replacement fuse has a rating of 5-ampere and that it is approved by ASTA or BSI to BS1362. Check for the ASTA mark Ï or the BSI mark Ì on the body of the fuse.
SC-HTB170EGEBGN_RQT9772-B.book 4 ページ ２０１３年２月４日 月曜日 午前９時５分 Table of contents Safety precautions ........................................................................................... 2 Caution for AC Mains Lead ............................................................................. 3 About Bluetooth® ............................................................................................. 3 Before use Supplied items ........................................................................
SC-HTB170EGEBGN_RQT9772-B.book 5 ページ ２０１３年２月４日 月曜日 午前９時５分 Before use ≥ The illustrations shown may differ from your unit. ≥ These operation instructions are applicable to model SC-HTB170 for variety of regions. Unless otherwise indicated, illustrations in these operating instructions are of the model for the United Kingdom and Ireland.
SC-HTB170EGEBGN_RQT9772-B.book 6 ページ ２０１３年２月４日 月曜日 午前９時５分 Control reference guide This system (Front) 4 5 6 1 2 3 7 1 2 3 4 5 6 Standby/on switch (Í/I) Press to switch the unit from on to standby mode or vice versa. In standby mode, the unit is still consuming a small amount of power.
SC-HTB170EGEBGN_RQT9772-B.book 7 ページ ２０１３年２月４日 月曜日 午前９時５分 This system (Rear) 6 *1 *2 AC IN terminal (> 19) Ir SYSTEM terminal (> 18) OPTICAL DIGITAL AUDIO IN (TV) terminal (> 16) 4 5 6 HDMI OUT terminal (ARC compatible) (> 16) HDMI IN terminal (> 17) USB port (for service use only) Before use 1 2 3 The indicators will also blink in various conditions. (> 29) The indicator blinks for 5 sec when the main unit detects an audio format.
SC-HTB170EGEBGN_RQT9772-B.book 8 ページ ２０１３年２月４日 月曜日 午前９時５分 Remote control ∫ Before using for the first time Remove the insulation sheet A.
SC-HTB170EGEBGN_RQT9772-B.book 9 ページ ２０１３年２月４日 月曜日 午前９時５分 Step 1 Selecting the placement method Getting started ≥Choose a placement method that suits you best. The main unit When placing the main unit in a rack or on a table Angle 1: 0o tilt ≥Speaker angle indicator lights green. Page 11 Before use [A] Raised by using the basic stands Angle 2: Tilted at 30o ≥Speaker angle indicator lights amber.
SC-HTB170EGEBGN_RQT9772-B.book 10 ページ ２０１３年２月４日 月曜日 午前９時５分 Safety Precautions Professional installation is required. The installation should never be done by any other than a qualified installation specialist. PANASONIC DISCLAIMS ANY PROPERTY DAMAGE AND/OR SERIOUS INJURY, INCLUDING DEATH RESULTING FROM IMPROPER INSTALLATION OR INCORRECT HANDLING. ≥ Be sure to install the main unit as indicated within this operating Instructions.
SC-HTB170EGEBGN_RQT9772-B.book 11 ページ ２０１３年２月４日 月曜日 午前９時５分 Step 2 Placement When placing the main unit in a rack or on a table Precautions ≥ Place the main unit on a flat and horizontal surface. Supplied accessories ∏ 2 Basic stands ∏ 2 30o stands ∏ 2 80o stands ∏ 2 Screws with washer Additionally required accessories (commercially available) Getting started ≥Fall prevention cord ....................................................................................................................
SC-HTB170EGEBGN_RQT9772-B.book 12 ページ ２０１３年２月４日 月曜日 午前９時５分 Attach the stands if necessary. If not, proceed to step 3. [A]: With basic stands [B]: With 30o stands e.g., With basic stands [C]: With 80o stands A Screw (supplied) ≥ Tighten securely. Place the main unit in the desired position and attach each cord onto the rack or table. ≥ Make sure that the slack of the cord is minimal. B Screw eye ≥Attach at a position capable of supporting over 33 kg.
SC-HTB170EGEBGN_RQT9772-B.book 13 ページ ２０１３年２月４日 月曜日 午前９時５分 When attaching the main unit to a wall This unit can be wall mounted using the supplied wall mount brackets, etc. Make sure that the screw used and the wall are strong enough to support the weight of at least 33 kg. The screws and other items are not supplied as the type and size will vary with each installation. ≥Refer to step 2 for details about the required screws. ≥Be sure to attach the fall prevention cord as a secondary safety measure.
SC-HTB170EGEBGN_RQT9772-B.book 14 ページ ２０１３年２月４日 月曜日 午前９時５分 Attach the wall mount brackets to the wall. A Wall mount bracket (supplied) B Screws C D E F G At least 30 mm ‰4.0 mm ‰7.5 mm to ‰9.4 mm Wall Wall mount bracket (supplied) Complete all the necessary connections to the main unit. (> 16 to 19) ≥ Connect the AC mains lead cord to the main unit, but do not connect it to the household mains socket until the installation is completed. Attach the cord to the main unit.
SC-HTB170EGEBGN_RQT9772-B.book 15 ページ ２０１３年２月４日 月曜日 午前９時５分 Attach the main unit to the wall mount brackets. Precautions A Wall mount bracket (supplied) B Gently move the main unit down onto the wall mount bracket. Screw the safety holder onto the wall mount brackets. ≥ Screw tightening torque: 80 N0cm to 120 N0cm. ≥ The safety holders are designed to prevent the main unit from falling off the wall mount bracket.
SC-HTB170EGEBGN_RQT9772-B.book 16 ページ ２０１３年２月４日 月曜日 午前９時５分 Step 3 Connections ≥Turn off all equipment before connection and read the appropriate operating instructions. Do not connect the AC mains lead until all other connections are completed. ∫ HDMI ≥ The HDMI connection supports VIERA Link “HDAVI Control” (> 22) when used with a compatible Panasonic TV. ≥ Use the ARC compatible High Speed HDMI Cables. Non-HDMI-compliant cables cannot be utilised.
SC-HTB170EGEBGN_RQT9772-B.book 17 ページ ２０１３年２月４日 月曜日 午前９時５分 Connection from an HDMI compatible device You can direct the audio signal from the connected Blu-ray Disc player, DVD player, Set Top Box, etc. to this system. Preparation ≥Connect the main unit to the TV. (> 16) e.g.
SC-HTB170EGEBGN_RQT9772-B.book 18 ページ ２０１３年２月４日 月曜日 午前９時５分 Using the IR Blaster With the IR Blaster connection, it is possible to send the IR signal received by this system’s remote control signal sensor to the TV’s sensor. Use the TV’s remote control within the operation range of this system’s remote control signal sensor. ≥For the operation range, refer to page 8. Connect the jack plug to the main unit’s Ir SYSTEM terminal.
SC-HTB170EGEBGN_RQT9772-B.book 19 ページ ２０１３年２月４日 月曜日 午前９時５分 AC mains lead connection ≥ Connect only after all other connections are completed. A To a household mains socket B AC mains lead (supplied) AC IN ≥This system consumes a small amount of AC power (> 30) even when it is turned off. In the interest of power conservation, if you will not be using this system for a long time, unplug it from the household mains socket.
SC-HTB170EGEBGN_RQT9772-B.book 20 ページ ２０１３年２月４日 Using this system 月曜日 午前９時５分 Operations Adjust the volume and sound effect level. Preparation ≥ Turn on the TV and/or connected device. ∫ To adjust the volume of this system Press [i VOL j]. ≥ Volume range: 0 to 100* ∫ To adjust the dialog effect level DIALOG LEVEL INPUT SELECTOR LINK MODE SOUND ----PAIRING This setting will change the level of the Clearmode dialog effect. (> 21) 1 Press [i DIALOG LEVEL j] to display the current level.
SC-HTB170EGEBGN_RQT9772-B.book 21 ページ ２０１３年２月４日 3D sound This system provides a feeling that the sound and the image are as one. ≥ To change the applied effect, refer to “Sound modes”. (> right) e.g., Image of 3D sound field 月曜日 午前９時５分 Sound modes By changing the sound mode, it is possible to enjoy the sound that is suitable to the TV program or image from the connected device. ∫ To select the sound mode Press [SOUND].
SC-HTB170EGEBGN_RQT9772-B.book 22 ページ ２０１３年２月４日 月曜日 午前９時５分 Linked operations with the TV (VIERA Link “HDAVI ControlTM”) What is VIERA Link “HDAVI Control”? VIERA Link “HDAVI Control” is a convenient function that offers linked operations of this system, and a Panasonic TV (VIERA) under “HDAVI Control”. You can use this function by connecting the equipment with an HDMI cable. See the operating instructions for connected equipment for operational details.
ページ ２０１３年２月４日 Advanced operations Audio format indicator To display the current audio format. Press and hold [SOUND] for more than 4 sec. 月曜日 午前９時５分 Auto gain control With this function, you can prevent sudden loud sounds. The output will be reduced automatically when the input exceeds a certain level. Press and hold [INPUT SELECTOR] on the remote control for more than 4 sec. ≥ The current audio format is indicated for 5 sec. “STADIUM” indicator blinks: Dolby Digital is the audio format.
SC-HTB170EGEBGN_RQT9772-B.book 24 ページ ２０１３年２月４日 Using the Dolby Virtual Speaker effect Depending on your preference, It is possible to turn off the 3D surround effect and the clearmode dialog effect. While pressing and holding [SOUND] on the remote control, press and hold [VOL i] on the main unit for more than 4 sec. “STANDARD” indicator blinks: 3D surround effect and clear-mode dialog effect is on. “STEREO” indicator blinks: 3D surround effect and clear-mode dialog effect is off.
SC-HTB170EGEBGN_RQT9772-B.book 25 ページ ２０１３年２月４日 Others ∫ Remote control code When other Panasonic devices respond to this system’s remote control, change the remote control code on this system and the remote control. Preparation ≥ Turn off all other Panasonic products. ≥ Turn on the main unit. Change the remote control code to code 2: 1 Aim the remote control at the main unit’s remote control sensor. 2 Press and hold [MUTE] and [ ] on the remote control for more than 4 sec.
SC-HTB170EGEBGN_RQT9772-B.book 26 ページ ２０１３年２月４日 Troubleshooting 月曜日 午前９時５分 Reference Before requesting service, make the following checks. If you are in doubt about some of the check points, or if the solutions indicated in the following guide do not solve the problem, consult your dealer for instructions. The main unit is automatically switched to standby mode. The auto standby function is on.
SC-HTB170EGEBGN_RQT9772-B.book 27 ページ ２０１３年２月４日 HDMI This system does not operate correctly. If the HDMI cable is connected to the wrong terminal (HDMI IN or HDMI OUT), this system will not operate correctly. Turn the main unit off, disconnect the AC mains lead and reconnect the HDMI cable(s). (> 16, 17) VIERA Link related operations no longer function properly. ≥ Check the VIERA Link setting on the connected devices.
SC-HTB170EGEBGN_RQT9772-B.book 28 ページ ２０１３年２月４日 Sound No sound (or image). ≥ Turn muting off. (> 20) ≥ Check the connections to the other devices. (> 16, 17) ≥ Make sure that the received audio signal is compatible with this system. (> 30) ≥ Turn this system off and then on again. ≥ If the main unit is connected to the TV with only an HDMI cable, make sure that the TV’s HDMI terminal is labelled “HDMI (ARC)”. If not, connect using the optical digital audio cable.
SC-HTB170EGEBGN_RQT9772-B.book 29 ページ ２０１３年２月４日 月曜日 午前９時５分 Indicator illumination The indicators display the condition of this system by flashing. The indicator patterns illustrated below are displayed during normal operational conditions. They do not refer to the indications of a problem. Indicator Description The indicator blinks for 10 sec. ≥ When the Bluetooth® communication is mode 1 (> 23) The indicator blinks for 20 sec.
SC-HTB170EGEBGN_RQT9772-B.book 30 ページ ２０１３年２月４日 月曜日 午前９時５分 Specifications AMPLIFIER SECTION RMS output power: Dolby Digital Mode Front ch 30 W per channel (6 ≠), 1 kHz, 10 % THD Subwoofer ch 60 W per channel (3 ≠), 100 Hz, 10 % THD Total RMS Dolby Digital mode power 120 W TERMINAL SECTION HDAVI Control This unit supports “HDAVI Control 5” function.
SC-HTB170EGEBGN_RQT9772-B.book 31 ページ ２０１３年２月４日 月曜日 午前９時５分 Unit care ∫ Clean this system with a soft, dry cloth ≥ When dirt is heavy, wring a cloth moistened in water tightly to wipe the dirt, and then wipe it with a dry cloth. ≥ Never use alcohol, paint thinner or benzine to clean this system. ≥ Before using chemically-treated cloth, carefully read the instructions that came with the cloth. ∫ To dispose or transfer this system This system may keep the user settings information in the main unit.
SC-HTB170EGEBGN_RQT9772-B.book 32 ページ ２０１３年２月４日 月曜日 午前９時５分 Information for Users on Collection and Disposal of Old Equipment and used Batteries These symbols on the products, packaging, and/or accompanying documents mean that used electrical and electronic products and batteries should not be mixed with general household waste.
SC-HTB170EGEBGN_RQT9772-B.book 33 ページ ２０１３年２月４日 月曜日 午前９時５分 Safety information for customers in the EU Hereby, “Panasonic Corporation” declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. Customers can download a copy of the original DoC to our R&TTE products from our DoC server: http://www.doc.panasonic.
SC-HTB170EGEBGN_RQT9772-B.book 34 ページ ２０１３年２月４日 月曜日 午前９時５分 Norsk Samsvarserklæring (DoC) Български Декларация за съответствие (DoC) “Panasonic Corporation” erklærer at utstyret er i samsvar med de grunnleggende krav og øvrige relevante krav i direktiv 1999/5/EF. Kundene kan laste ned en kopi av den originale samsvarserklæringen (DoC) for vårt R&TTE utstyr fra vår DoC server: http://www.doc.panasonic.
SC-HTB170EGEBGN_RQT9772-B.book 35 ページ ２０１３年２月４日 月曜日 午前９時５分 Limited Warranty (ONLY FOR AUSTRALIA) Panasonic Warranty 1. The product is warranted for 12 months from the date of purchase. Subject to the conditions of this warranty Panasonic or its Authorised Service Centre will perform necessary service on the product without charge for parts or labour, if in the opinion of Panasonic, the product is found to be faulty within the warranty period. 2.
HTB170EGEBGN~BCover_mst.fm 31 ページ ２０１３年７月３日 水曜日 午後６時２２分 For the United Kingdom and Ireland customers Sales and Support Information Customer Communications Centre ≥ For customers within the UK: 0844 844 3899 ≥ For customers within Ireland: 01 289 8333 ≥ Monday–Friday 9:00 am – 5:00 pm (Excluding public holidays). ≥ For further support on your product, please visit our website: www.panasonic.co.
