SC-HTB18_EB_VQT5J46.book 1 ページ ２０１４年３月１９日 水曜日 午前９時４７分 Operating Instructions Home Theater Audio System Model No. SC-HTB18 Thank you for purchasing this product. Please read these instructions carefully before using this product, and save this manual for future use. Included Installation Instructions The installation work should be done by a qualified installation specialist.
SC-HTB18_EB_VQT5J46.book 2 ページ ２０１４年３月１９日 水曜日 午前９時４７分 Safety precautions Table of contents WARNING CAUTION Unit Unit ≥ To reduce the risk of fire, electric shock or product damage, jDo not expose this unit to rain, moisture, dripping or splashing. jDo not place objects filled with liquids, such as vases, on this unit. jUse only the recommended accessories. jDo not remove covers. jDo not repair this unit by yourself. Refer servicing to qualified service personnel.
SC-HTB18_EB_VQT5J46.book 3 ページ ２０１４年３月１９日 (For the AC mains plug of three pins) For your safety, please read the following text carefully. This appliance is supplied with a moulded three pin mains plug for your safety and convenience. A 5-ampere fuse is fitted in this plug. Should the fuse need to be replaced please ensure that the replacement fuse has a rating of 5-ampere and that it is approved by ASTA or BSI to BS1362. Check for the ASTA mark Ï or the BSI mark Ì on the body of the fuse.
SC-HTB18_EB_VQT5J46.book 4 ページ ２０１４年３月１９日 水曜日 午前９時４７分 Table of contents Safety precautions............................................................................................. 2 Caution for AC Mains Lead............................................................................... 3 About Bluetooth® ............................................................................................... 3 Before use Supplied items ..........................................................................
SC-HTB18_EB_VQT5J46.book 5 ページ ２０１４年３月１９日 水曜日 午前９時４７分 Before use ≥ The illustrations shown may differ from your unit. ≥ Operations in this operating instructions are described mainly with the remote control, but you can perform the operations on the main unit if the controls are the same. Supplied items ∏ 1 Subwoofer (SB-HTB18) Before use ∏ 1 Main unit (Speaker) (SU-HTB18) Precautions This system (SC-HTB18) Accessory Check the supplied accessory before using this system.
SC-HTB18_EB_VQT5J46.book 6 ページ ２０１４年３月１９日 水曜日 午前９時４７分 Control reference guide This system (Front) 1 2 3 ヷヰロ リワヱヶヵ 4 ヵヷ 5 6 ャュバュヷュ ヤロユモンチヷヰリヤユ ヴヶンンヰヶワュ ⾼ヱモリンリワヨ 7 Main unit 1 Standby/on switch (Í/I) Subwoofer 5 Press to switch the unit from on to standby mode or vice versa. In standby mode, the unit is still consuming a small amount of power.
SC-HTB18_EB_VQT5J46.book 7 ページ ２０１４年３月１９日 水曜日 午前９時４７分 This system (Rear) 9 8 10 11 12 13 Before use Main unit 14 Subwoofer 8 9 10 11 AC mains lead (> 10) Wall mounting hole OPTICAL DIGITAL AUDIO IN terminal (> 9) AUDIO IN terminal (> 9) 12 MULTI ANGLE switch (> 14, 15) Switch the audio quality according to the placement method of the main unit.
SC-HTB18_EB_VQT5J46.book 8 ページ ２０１４年３月１９日 水曜日 午前９時４７分 Remote control ∫ Before using for the first time Remove the insulation sheet A.
SC-HTB18_EB_VQT5J46.book 9 ページ ２０１４年３月１９日 水曜日 午前９時４７分 Step 1 Connections Getting started ≥Turn off all equipment before connection and read the appropriate operating instructions. Do not connect the AC mains lead until all other connections are completed. Connection with the TV A TV TV OPTICAL DIGITAL AUDIO IN OPTICAL OUT Before use A Optical digital audio cable ≥ When you use the optical digital audio cable, insert the tip correctly into the terminal.
SC-HTB18_EB_VQT5J46.book 10 ページ ２０１４年３月１９日 水曜日 午前９時４７分 Speaker cable connection Match the connector shape and connect to the terminal. A SUBWOOFER A speaker cable AC mains lead connection ≥ Connect only after all other connections are completed. C B To a household mains socket C AC mains lead B ≥This system consumes a small amount of AC power (> 23) even when it is turned off.
SC-HTB18_EB_VQT5J46.book 11 ページ ２０１４年３月１９日 水曜日 午前９時４７分 Bluetooth® connection By using the Bluetooth® connection, you can listen to the sound from the Bluetooth® audio device from this system wirelessly. ≥ Refer to the operating instructions of the Bluetooth® device for further instruction on how to connect a Bluetooth® device. Preparation ≥Turn on the Bluetooth® feature of the device and place the device near the main unit. Bluetooth® pairing Press [ ] to select “ ”.
SC-HTB18_EB_VQT5J46.book 12 ページ ２０１４年３月１９日 水曜日 午前９時４７分 Step 2 Placement Safety Precautions Professional installation is required. The installation should never be done by any other than a qualified installation specialist. PANASONIC DISCLAIMS ANY PROPERTY DAMAGE AND/OR SERIOUS INJURY, INCLUDING DEATH RESULTING FROM IMPROPER INSTALLATION OR INCORRECT HANDLING. ≥ Be sure to install the main unit as indicated within this operating Instructions.
SC-HTB18_EB_VQT5J46.book 13 ページ ２０１４年３月１９日 水曜日 午前９時４７分 Selecting the placement method Choose a placement method that suits you best. ≥ Place the main unit on a flat and horizontal surface. ≥ Place the main unit in front of the TV pedestal. Precautions When placing the main unit on a rack or on a table Page 14 When attaching the main unit to a wall ≥ Place the main unit on a flat and vertical surface.
SC-HTB18_EB_VQT5J46.book 14 ページ ２０１４年３月１９日 水曜日 午前９時４７分 When placing the main unit on a rack or on a table Additionally required accessories (commercially available) ≥Fall prevention cord ..................................................................................................................... k 1 ≥Screw eye (to attach the fall prevention cord)...............................................................................
SC-HTB18_EB_VQT5J46.book 15 ページ ２０１４年３月１９日 水曜日 午前９時４７分 When attaching the main unit to a wall Additionally required accessories (commercially available) ≥Screws for wall mounting ............................................................................................................. k 2 ≥Fall prevention cord ...................................................................................................................... k 1 ≥Screw eye (to attach the fall prevention cord) ......................
SC-HTB18_EB_VQT5J46.book 16 ページ ２０１４年３月１９日 水曜日 午前９時４７分 Drive a screw into the wall. ≥ Use the measurements indicated below to identify the screwing positions on the wall. ≥ Leave at least 20 mm of space above of the main unit to allow enough space for fitting the main unit. ≥ Leave at least 10 mm of space on both sides of the main unit. Without sufficient space, it is not possible to mount the main unit successfully. ≥ Be sure to use a level to insure that both mounting holes are level to each other.
SC-HTB18_EB_VQT5J46.book 17 ページ ２０１４年３月１９日 水曜日 午前９時４７分 Using this system Operations Preparation ≥ Turn on the TV and/or connected device. ∫ To adjust the volume of this system Press [i VOL j]. ∫ To adjust the subwoofer level SURROUND 1 CLEAR VOICE 2 BD/DVD ---- PAIRING Indication ャュバュヷュ ヤロユモンチヷヰリヤユ ヴヶンンヰヶワュ 4 ャュバュヷュ ヤロユモンチヷヰリヤユ ヴヶンンヰヶワュ 3 ャュバュヷュ ヤロユモンチヷヰリヤユ ヴヶンンヰヶワュ 2 ャュバュヷュ ヤロユモンチヷヰリヤユ ヴヶンンヰヶワュ 1 Press [Í] to turn on the main unit. Select the source.
SC-HTB18_EB_VQT5J46.book 18 ページ ２０１４年３月１９日 水曜日 午前９時４７分 Advanced operations Audio format indicator Bluetooth® Stand-by To display the current audio format. Press and hold [SURROUND] for more than 4 sec. ≥ The current audio format is indicated for 5 sec. ヤロユモンチヷヰリヤユ ヴヶンンヰヶワュ “CLEAR VOICE” indicator blinks: Dolby® Digital is the audio format. “SURROUND” indicator blinks: DTS® is the audio format. This function allows you to connect a paired Bluetooth® device when the main unit is in standby mode.
SC-HTB18_EB_VQT5J46.book 19 ページ ２０１４年３月１９日 水曜日 午前９時４７分 Others ∫ Remote control code When other Panasonic devices respond to this system’s remote control, change the remote control code on this system and the remote control. Preparation ≥ Turn off all other Panasonic products. ≥ Turn on the main unit. Change the remote control code to code 2: 1 Aim the remote control at the main unit’s remote control sensor. 2 Press and hold [MUTE] and [ ] on the remote control for more than 4 sec.
SC-HTB18_EB_VQT5J46.book 20 ページ ２０１４年３月１９日 水曜日 午前９時４７分 Troubleshooting Reference Before requesting service, make the following checks. If you are in doubt about some of the check points, or if the solutions indicated in the following guide do not solve the problem, consult your dealer for instructions. To return to the factory defaults. While the main unit is on, press and hold [Í/I] on the main unit for more than 4 sec. (All the indicators will blink twice when this system is reset.
SC-HTB18_EB_VQT5J46.book 21 ページ ２０１４年３月１９日 (When the main unit detects a problem, a safety measure is activated and the main unit automatically switches to standby mode.) ≥ There is a problem with the amplifier. ≥ Is the volume extremely high? If so, lower the volume. ≥ Is this system placed in an extremely hot place? If so, move this system to a cooler place and wait a few moments and then try to turn it on again.
SC-HTB18_EB_VQT5J46.book 22 ページ ２０１４年３月１９日 水曜日 午前９時４７分 Indicator illumination The indicators display the condition of this system by flashing. The indicator patterns illustrated below are displayed during normal operational conditions. They do not refer to the indications of a problem.
SC-HTB18_EB_VQT5J46.book 23 ページ ２０１４年３月１９日 水曜日 午前９時４７分 Specifications AMPLIFIER SECTION Bluetooth® SECTION RMS Output power : Dolby Digital Mode Front ch (non-simultaneous drive) 30 W per channel (1 kHz, 10 % THD, 4 ≠) Subwoofer ch 60 W (100 Hz, 10 % THD, 8 ≠) Total RMS Dolby Digital mode Power 120 W TERMINALS SECTION Digital Audio Input (TV) Optical digital input Optical terminal Sampling Frequency 32 kHz, 44.1 kHz, 48 kHz, 88.
SC-HTB18_EB_VQT5J46.book 24 ページ ２０１４年３月１９日 水曜日 午前９時４７分 Sales and Support Information Customer Communications Centre ≥ For customers within the UK: 0844 844 3899 ≥ For customers within Ireland: 01 289 8333 ≥ Monday–Friday 9:00 am – 5:00 pm (Excluding public holidays). ≥ For further support on your product, please visit our website: www.panasonic.co.
