SC-HTB690-SQT0852.book 1 ページ ２０１５年４月２８日 火曜日 午前９時５４分 Operating Instructions Home Theater Audio System Model No. SC-HTB690 Thank you for purchasing this product. Please read these instructions carefully before using this product, and save this manual for future use. Included Installation Instructions The installation work should be done by a qualified installation specialist.
SC-HTB690-SQT0852.book 2 ページ ２０１５年４月２８日 火曜日 午前９時５４分 Safety precautions WARNING CAUTION Unit Unit ≥ To reduce the risk of fire, electric shock or product damage, jDo not expose this unit to rain, moisture, dripping or splashing. jDo not place objects filled with liquids, such as vases, on this unit. jUse only the recommended accessories. jDo not remove covers. jDo not repair this unit by yourself. Refer servicing to qualified service personnel.
SC-HTB690-SQT0852.book 3 ページ ２０１５年４月２８日 火曜日 午前９時５４分 (For the AC mains plug of three pins) For your safety, please read the following text carefully. This appliance is supplied with a moulded three pin mains plug for your safety and convenience. A 10-ampere fuse is fitted in this plug. Should the fuse need to be replaced please ensure that the replacement fuse has a rating of 10-ampere and that it is approved by ASTA or BSI to BS1362. Check for the ASTA mark Ï or the BSI mark Ì on the body of the fuse.
SC-HTB690-SQT0852.book 4 ページ ２０１５年４月２８日 火曜日 午前９時５４分 Table of contents Safety precautions ........................................................................................... 2 Caution for AC Mains Lead ............................................................................. 3 Before use Supplied items.................................................................................................. 5 This system (SC-HTB690) .....................................................................
SC-HTB690-SQT0852.
SC-HTB690-SQT0852.book 6 ページ ２０１５年４月２８日 火曜日 午前９時５４分 Control reference guide This system (Front) 2 1 3 4 5 Main unit 7 6 8 9 Active subwoofer 1 2 [ ] NFC touch area (> 20) [Í/I] Standby/on switch (Í/I) Touch to switch the unit from on to standby mode or vice versa. In standby mode, the unit is still consuming a small amount of power.
SC-HTB690-SQT0852.
SC-HTB690-SQT0852.book 8 ページ ２０１５年４月２８日 火曜日 午前９時５４分 ∫ To replace a button-type battery Remote control Battery type: CR2025 (Lithium battery) 1 5 2 INPUT 6 3 4 SETUP SOUND 7 OK 8 ≥ Set the button-type battery with its (i) mark facing upward.
火曜日 Step 1 Connections Getting started ≥ Turn off all equipment before connection and read the appropriate operating instructions. Do not connect the AC mains lead until all other connections are completed. Connection with the TV 1 ≥ The HDMI connection supports VIERA Link “HDAVI Control” (> 25) when used with a compatible Panasonic TV. ≥ Use the ARC compatible High Speed HDMI Cables. Non-HDMI-compliant cables cannot be utilised. ≥ It is recommended that you use Panasonic’s HDMI cable.
SC-HTB690-SQT0852.book 10 ページ ２０１５年４月２８日 [B] Not labelled “HDMI (ARC)” 火曜日 午前９時５４分 Connection from an HDMI compatible device You can direct the audio signal from the connected Blu-ray Disc player, DVD player, Set Top Box, etc. to this system. Preparation ≥ Connect the main unit to the TV. (> 9) HDMI IN OPTICAL OUT TV A HDMI cable B Optical digital audio cable ≥ When you use the optical digital audio cable, insert the tip correctly into the terminal. 10 SQT0852 e.g.
SC-HTB690-SQT0852.book 11 ページ ２０１５年４月２８日 Using the IR Blaster (When the remote control does not work properly) 火曜日 3 午前９時５４分 Aim the TV’s remote control at this system’s remote control sensor and operate the TV. Depending on how the main unit is setup, it may block the TV’s remote control signal sensor, stopping the TV’s remote control from working. Use the supplied Ir system cable if this occurs. The TV remote control signals received by the main unit are sent to the TV to operate it.
SC-HTB690-SQT0852.book 12 ページ ２０１５年４月２８日 AC mains lead connection ≥ Connect only after all other connections are completed. ※ A To a household mains socket B AC mains lead for the main unit (supplied) C AC mains lead for the active subwoofer (supplied) § Insert the AC mains lead fully into the main unit. ≥ This system consumes a small amount of AC power (> 32) even when it is turned off.
Step 2 Placement Safety Precautions Professional installation is required. The installation should never be done by any other than a qualified installation specialist. PANASONIC DISCLAIMS ANY PROPERTY DAMAGE AND/OR SERIOUS INJURY, INCLUDING DEATH RESULTING FROM IMPROPER INSTALLATION OR INCORRECT HANDLING. ≥ Be sure to install the main unit as indicated within this operating Instructions. ≥ Attach using techniques suited to the structure and materials of the installation location.
SC-HTB690-SQT0852.book 14 ページ ２０１５年４月２８日 Selecting the placement method Choose a placement method that suits you best. When placing the main unit in a rack or on a table ≥ Place the main unit on a flat and horizontal surface. 火曜日 午前９時５４分 ∫ When placing the main unit in front of the TV The main unit may block or interfere with the TV’s various sensors (C.A.T.S. (Contrast Automatic Tracking System) sensor, remote control sensor, etc.) and the 3D Eyewear transmitters on a 3D compatible TV.
SC-HTB690-SQT0852.book 15 ページ ２０１５年４月２８日 火曜日 午前９時５４分 When placing the main unit in a rack or on a table Additionally required accessories (commercially available) Precautions ≥ Fall prevention cord ..................................................................................................................... k 2 ≥ Screw eyes (to attach the fall prevention cord) ............................................................................
SC-HTB690-SQT0852.book 16 ページ ２０１５年４月２８日 火曜日 午前９時５４分 When attaching the main unit to a wall The main unit can be wall mounted using the supplied wall mount brackets, etc. Make sure that the screw used and the wall are strong enough to support the weight of at least 26 kg. The screws and other items are not supplied as the type and size will vary with each installation. ≥ Refer to step 3 for details about the required screws. ≥ Be sure to attach the fall prevention cord as a secondary safety measure.
SC-HTB690-SQT0852.book 2 17 ページ ２０１５年４月２８日 火曜日 午前９時５４分 Attach the wall mount brackets to the main unit. Precautions A Wall mount bracket (supplied) B Screw (supplied) 3 ≥ ≥ ≥ ≥ Drive a screw into the wall. Use the measurements indicated below to identify the screwing positions on the wall. Leave at least 100 mm of space above of the main unit to allow enough space for fitting the main unit. Position the main unit with at least 50 mm of free space to its right.
SC-HTB690-SQT0852.book 4 18 ページ ２０１５年４月２８日 午前９時５４分 Fit the main unit securely onto the screw(s). DO DO NOT ≥ Move the speaker so that the screw is in this position. 5 火曜日 Secure the cord to the wall. ≥ Make sure that the slack of the cord is minimal. A Screw eye B Cord 18 SQT0852 ≥ In this position, the speaker will likely fall if moved to the left or right.
ページ ２０１５年４月２８日 Step 3 Wireless connections Active subwoofer wireless connection Preparation ≥ Turn on the main unit. 1 Press [Í/I]. 火曜日 午前９時５４分 Bluetooth® connection By using the Bluetooth® connection, you can listen to the sound from the Bluetooth® audio device from this system wirelessly. ≥ Refer to the operating instructions of the Bluetooth® device for further instruction on how to connect a Bluetooth® device.
SC-HTB690-SQT0852.book 20 ページ ２０１５年４月２８日 One-Touch Connection (Connecting by NFC) For NFC-compatible Bluetooth® devices (AndroidTM devices) only Simply by touching an NFC (Near Field Communication)-compatible Bluetooth® device on the main unit, you can complete all preparations, from registering a Bluetooth® device to establishing a connection.
SC-HTB690-SQT0852.book 21 ページ ２０１５年４月２８日 Using this system 火曜日 午前９時５４分 Operations Preparation ∫ To adjust the volume of this system Press [j VOL i]. ≥ Turn on the active subwoofer. ≥ Turn on the TV and/or connected device. ≥ Volume range: 0 to 100 ∫ To mute the sound Press [MUTE]. ≥ While muting, “MUTE” is indicated on the display. ≥ To cancel, press the button again or adjust the volume. ≥ Muting is cancelled if the main unit is turned off.
SC-HTB690-SQT0852.book 22 ページ ２０１５年４月２８日 火曜日 午前９時５４分 3D sound Sound menu This system provides a feeling that the sound and the image are as one. ≥ To change the applied effect, refer to “Sound menu”. (> right) 1 2 Press [SOUND] repeatedly to select the sound effect. Press [4] [3] repeatedly to select the desired setting and then press [OK]. e.g., Image of 3D sound field SOUND MODE 3D sound With this effect you can enjoy Dolby® Virtual a surround sound effect Speaker similar to 5.1ch.
3D CLR DIALOG 23 ページ ２０１５年４月２８日 The 3D Clear Mode Dialog feature creates a sound field similar to the sound coming from a TV screen and makes dialogues clearer. ON: 3D Surround, Clear Mode Dialog and Dolby Virtual Speaker effect OFF: Dolby Virtual Speaker effect The setting is set back to “ON” every time you turn the main unit on. Sets the preferred audio channel mode when there are two audio modes received by this system.
SC-HTB690-SQT0852.book 24 ページ ２０１５年４月２８日 火曜日 午前９時５４分 Setup menu 1 Press [SETUP] repeatedly to select the setup item. 2 Press [4] [3] repeatedly to select the desired setting and then press [OK]. DIMMER BEEP A beep sounds when the touch key on the main unit is operated and when the unit is turned on or off. ≥ This works during muting as well. ON OFF Sets the volume limit to 50 when you turn on the main unit although the volume is set to above 50 before it is turned off.
ページ ２０１５年４月２８日 Linked operations with the TV (VIERA Link “HDAVI ControlTM”) What is VIERA Link “HDAVI Control”? VIERA Link “HDAVI Control” is a convenient function that offers linked operations of this system, and a Panasonic TV (VIERA) under “HDAVI Control”. You can use this function by connecting the equipment with an HDMI cable. See the operating instructions for connected equipment for operational details. Preparation 1 Confirm that the HDMI connection has been made.
SC-HTB690-SQT0852.book 26 ページ ２０１５年４月２８日 Troubleshooting 火曜日 午前９時５４分 Reference Before requesting service, make the following checks. If you are in doubt about some of the check points, or if the solutions indicated in the following guide do not solve the problem, consult your dealer for instructions. If this system does not operate as expected, returning the settings to the factory preset may solve the problem. To return to the factory preset.
SC-HTB690-SQT0852.book 27 ページ ２０１５年４月２８日 HDMI This system does not operate correctly. If the HDMI cable is connected to the wrong terminal (HDMI AV IN or HDMI AV OUT), this system will not operate correctly. Turn the main unit off, disconnect the AC mains lead and reconnect the HDMI cable(s). (> 9, 10) VIERA Link related operations no longer function properly. ≥ Check the VIERA Link setting on the connected devices. jTurn on VIERA Link function on the connected devices.
SC-HTB690-SQT0852.book 28 ページ ２０１５年４月２８日 Bluetooth® Pairing cannot be done. Check the Bluetooth® device condition. The device cannot be connected. ≥ The pairing of the device was unsuccessful or the registration has been replaced. Try pairing the device again. (> 19) ≥ This system might be connected to a different device. Disconnect the other device and try pairing the device again. The device is connected but audio cannot be heard through this system.
ページ ２０１５年４月２８日 There is no audio. The power of the main unit turns off automatically. (When the main unit detects a problem, a safety measure is activated and the main unit automatically switches to standby mode.) ≥ There is a problem with the amplifier. ≥ Is the volume extremely high? If so, lower the volume. ≥ Is this system placed in an extremely hot place? If so, move this system to a cooler place and wait a few moments and then try to turn it on again.
SC-HTB690-SQT0852.book 30 ページ ２０１５年４月２８日 Active Subwoofer No power. Ensure the AC mains lead of the active subwoofer is connected properly. After turning the subwoofer on, it immediately turns off. Unplug the AC mains lead and consult your dealer. No sound from the subwoofer. ≥ Check that the active subwoofer is turned on. ≥ Check that the WIRELESS LINK indicator lights green. (> 19) The WIRELESS LINK indicator lights red. ≥ There is no link between the main unit and the active subwoofer.
ページ ２０１５年４月２８日 About Bluetooth® Panasonic bears no responsibility for data and/or information that is compromised during a wireless transmission. ∫ Frequency band used This system uses the 2.4 GHz frequency band. ∫ Certification of this device ≥ This system conforms to frequency restrictions and has received certification based on frequency laws. Thus, a wireless permit is not necessary. ≥ The action below are punishable by law in some countries: jTaking apart or modifying the unit.
SC-HTB690-SQT0852.book 32 ページ ２０１５年４月２８日 Specifications AMPLIFIER SECTION RMS output power (non-simultaneous drive) Front ch (L, R ch) 70 W per channel (1 kHz, 10 %, 6 ≠) Centre ch (C ch) 70 W per channel (1 kHz, 10 %, 6 ≠) Subwoofer ch 140 W per channel (100 Hz, 10 %,3 ≠) Total RMS output power 350 W TERMINAL SECTION HDAVI Control This unit supports “HDAVI Control 5” function.
SC-HTB690-SQT0852.book 33 ページ ２０１５年４月２８日 火曜日 午前９時５４分 SPEAKER SECTION Front speakers (Built-in, L/R/C) Full range 6.5 cm cone type k1 (Bass reflex type) Active subwoofer Woofer 16 cm cone type k1 (Bass reflex type) WIRELESS SECTION Frequency Range 2.40335 GHz to 2.47735 GHz No. of channels 38 Bluetooth® SECTION Bluetooth® system specification Bluetooth® Ver.2.1 +EDR Wireless equipment classification Class 2 (2.5 mW) Supported profiles A2DP Frequency band 2.4 GHz band FH-SS Operating distance approx.
SC-HTB690-SQT0852.book 34 ページ ２０１５年４月２８日 火曜日 午前９時５４分 Safety information for customers in the EU English Declaration of Conformity (DoC) Lietuviškai Hereby, “Panasonic Corporation” declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. Customers can download a copy of the original DoC to our R&TTE products from our DoC server: http://www.doc.panasonic.
SC-HTB690-SQT0852.book 35 ページ ２０１５年４月２８日 火曜日 午前９時５４分 Eesti keel Român Vastavusdeklaratsioon (DoC) Declaraţie de Conformitate (DoC) “Panasonic Corporation” kinnitab käesolevaga, et see toode on vastavuses põhiliste nõuete ja muude direktiivi 1999/5/EÜ asjakohaste sätetega. Kliendid saavad koopia meie R&TTE toodetele kehtiva originaalvastavusdeklaratsiooni koopia alla laadida meie DoCserverist: http://www.doc.panasonic.
SC-HTB690-SQT0852.book 36 ページ ２０１５年４月２８日 火曜日 午前９時５４分 Disposal of Old Equipment and Batteries Only for European Union and countries with recycling systems These symbols on the products, packaging, and/or accompanying documents mean that used electrical and electronic products and batteries must not be mixed with general household waste.
SC-HTB690-SQT0852.book 37 ページ ２０１５年４月２８日 火曜日 午前９時５４分 Limited Warranty (ONLY FOR AUSTRALIA) Panasonic Warranty 1. The product is warranted for 12 months from the date of purchase. Subject to the conditions of this warranty Panasonic or its Authorised Service Centre will perform necessary service on the product without charge for parts or labour, if in the opinion of Panasonic, the product is found to be faulty within the warranty period. 2.
SC-HTB690-SQT0852.
SC-HTB690-SQT0852.
SC-HTB690-SQT0852.book 42 ページ ２０１５年４月２８日 火曜日 午前９時５４分 For the United Kingdom and Ireland customers Sales and Support Information Customer Communications Centre ≥ For customers within the UK: 0344 844 3899 ≥ For customers within Ireland: 01 289 8333 ≥ Monday–Friday 9:00 am – 5:00 pm (Excluding public holidays). ≥ For further support on your product, please visit our website: www.panasonic.co.
